Rigid polyurethane foams: A model of the foaming process

A model of the manufacture of rigid polyurethane foams by free rising is presented. The extent of cream and rise periods as well as the amount of blowing agent necessary to give the desired foam density are theoretically predicted. The rate of blowing agent evaporation is calculated from an experimental boiling temperature vs. composition curve. Experimental runs were carried out with a formulation consisting of a polymeric isocyanate, a polyether polyol based on sorbitol, a silicone-polyol block-copolymer as surfactant, dibutyltin dilaurate as catalyst, and trichlorofluoromethane as blowing agent. Mixing was performed in situ in the mold using a commercial foaming machine. Experimental results gave a satisfactory agreement with model predictions. A diagram containing all the relevant information may be theoretically built and used for the selection of adequate operating parameters for a given formulation.     

The mechanism of CO oxidation over Cu(110): Effect of CO gas energy

The effect of the temperature of gas phase CO upon the kinetics of the oxygen titration reaction: CO_g +O_a CO_2,g, has been studied. It is found that the reaction's rate is independant of CO gas temperature between 300 and 623 K. The activation energy (6.5 kcal/mole), dependence upon CO pressure (first-order), and independence upon oxygen coverage for 0.1 _o 0.4 are all independant of the CO gas phase temperature. This result rules out any Eley-Rideal type mechanism whereby CO reacts directly from the gas phase with an oxygen adatom without first being accommodated to the surface temperature in an absorbed state. The result is instead interpretable in terms of a Langmuir-Hinshelwood mechanism.Camille and Henry Dreyfus Foundation Teacher-Scholar Fellowship.     

Calming fears, easing pain. Children's anesthesia tricky

To a child, pain and fear are inseparable. How to safely relieve both is a subject of growing debate and research. Only recently has a narcotic drug been approved specifically for children, and its use is controversial.     

Wire + Arc Additive Manufacturing

Depositing large components (>10?kg) in titanium, aluminium, steel and other metals is possible using Wire + Arc Additive Manufacturing. This technology adopts arc welding tools and wire as feedstock for additive manufacturing purposes. High deposition rates, low material and equipment costs, and good structural integrity make Wire+Arc Additive Manufacturing a suitable candidate for replacing the current method of manufacturing from solid billets or large forgings, especially with regards to low and medium complexity parts. A variety of components have been successfully manufactured with this process, including Ti–6Al–4V spars and landing gear assemblies, aluminium wing ribs, steel wind tunnel models and cones. Strategies on how to manage residual stress, improve mechanical properties and eliminate defects such as porosity are suggested. Finally, the benefits of non-destructive testing, online monitoring and in situ machining are discussed.     

Laparoscopic versus open appendectomy

BACKGROUND: Clinical manifestations and course of sickle-cell anemia are variable. Knowledge about the factors, possibly geographic, that influence prognosis are still scanty. POPULATION AND METHODS: Data of hospitalization and management of children with sickle-cell disease were studied during two years (1992-1993) in the Pediatric Unit of Libreville Hospital. They concerned 205 admissions of 171 children and 131 outpatients. RESULTS: The main causes of hospitalization were: acute anemia (36 cases before the age of 5 years); painful crisis whose frequency increased with age (23% before 5 years, 35% between 5 and 10, 42% after 10 years); infections, essentially pulmonary occurring early, and bone infections at any age. Eight children died (because a complication of their disease). Among the 131 outpatients, half were detected because pyrexia, anemia and/or more often "hand-foot syndrome". More than 60% had hepatomegaly, one third still had splenomegaly after five years of age and more than one third was icteric. More than half children older than ten years had growth disorders. Mean hemoglobin level was 7 g/dL. 21 of the 83 tested children for HBsAg were positive and only one out of 79 was positive for HIV. CONCLUSIONS: Clinical manifestations and course of sickle-cell anemia in our patients are similar to those reported in Congolese children. Genetic and environmental factors may be responsible for differences with children from other, in particular French, cohorts.     

Sensitivity analysis and optimization of vehicle–bridge systems based on combined PEM–PIM strategy

This paper presents a new optimization method for coupled vehicle–bridge systems subjected to uneven road surface excitation. The vehicle system is simplified as a multiple rigid-body model and the single-span bridge is modeled as a simply supported Bernoulli–Euler beam. The pseudo-excitation method transforms the random surface roughness into the superposition of a series of deterministic pseudo-harmonic excitations, which enables convenient and accurate computation of first and second order sensitivity information. The precise integration method is used to compute the vertical random vibrations for both the vehicle and the bridge. The sensitivities are used to find the optimal solution, with vehicle ride comfort taken as the objective function. Optimization efficiency and computational accuracy are demonstrated numerically.