Optical and electrical characterization of a gold nanoparticle dispersion in a chiral liquid crystal matrix

We report on the effect of gold nanoparticle (Au NP) dispersion in a chiral nematic liquid crystal (LC). Polarized optical microscopy and X-ray diffraction measurements evidence the insurgence of an order change in the LC host. Moreover, a comparative analysis based on dielectric and voltammetric spectroscopies performed on pure LC and on Au NP-doped LC shows that Au NP’s presence besides affecting LC order influences its electric properties: ion conductivity results importantly reduced, and beyond a threshold value of the applied field electrophoresis phenomena are induced.     

Silicone membranes to inhibit water uptake into thermoset polyurethane shape‐memory polymer conductive composites

Electroactive shape memory polymer (SMP) composites capable of shape actuation via resistive heating are of interest for various biomedical applications. However, water uptake into SMPs will produce a depression of the glass transition temperature (T_g) resulting in shape recovery in vivo. While water actuated shape recovery may be useful, it is foreseen to be undesirable during early periods of surgical placement into the body. Silicone membranes have been previously reported to prevent release of conductive filler from an electroactive polymer composite in vivo. In this study, a silicone membrane was used to inhibit water uptake into a thermoset SMP composite containing conductive filler. Thermoset polyurethane SMPs were loaded with either 5 wt % carbon black or 5 wt % carbon nanotubes, and subsequently coated with either an Al₂O₃‐ or silica‐filled silicone membrane. It was observed that the silicone membranes, particularly the silica‐filled membrane, reduced the rate of water absorption (37°C) and subsequent T_g depression versus uncoated composites. In turn, this led to a reduction in the rate of recovery of the permanent shape when exposed to water at 37°C. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41226.     

Developing and Maintaining an Inspection-Ready Pipeline Safety Program

For the past several decades, pipeline incidents have resulted in highly publicized accounts of property damage, environmental harm, neighborhood destruction, serious injury, and death.     

Activity of Fluorine‐Containing Analogues of WC‐9 and Structurally Related Analogues against Two Intracellular Parasites: Trypanosoma cruzi and Toxoplasma gondii

Two obligate intracellular parasites, Trypanosoma cruzi, the agent of Chagas disease, and Toxoplasma gondii, an agent of toxoplasmosis, upregulate the mevalonate pathway of their host cells upon infection, which suggests that this host pathway could be a potential drug target. In this work, a number of compounds structurally related to WC‐9 (4‐phenoxyphenoxyethyl thiocyanate), a known squalene synthase inhibitor, were designed, synthesized, and evaluated for their effect on T. cruzi and T. gondii growth in tissue culture cells. Two fluorine‐containing derivatives, the 3‐(3‐fluorophenoxy)‐ and 3‐(4‐fluorophenoxy)phenoxyethyl thiocyanates, exhibited half‐maximal effective concentration (EC₅₀) values of 1.6 and 4.9 μm , respectively, against tachyzoites of T. gondii, whereas they showed similar potency to WC‐9 against intracellular T. cruzi (EC₅₀ values of 5.4 and 5.7 μm , respectively). In addition, 2‐[3‐ (phenoxy)phenoxyethylthio]ethyl‐1,1‐bisphosphonate, which is a hybrid inhibitor containing 3‐phenoxyphenoxy and bisphosphonate groups, has activity against T. gondii proliferation at sub‐micromolar levels (EC₅₀=0.7 μm ), which suggests a combined inhibitory effect of the two functional groups.     

Development of blown film linear low-density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphology

In this study, linear low-density polyethylene (LLDPE)/clay nanocomposites with different clay contents were prepared by melt intercalation using two different compatibilizers: maleic anhydride grafted styrene–ethylene–butylene–styrene and maleic anhydride grafted polyethylene (PE-g-MA). Melt intercalation was achieved by twin extrusion and nanocomposite films were produced by blown film extrusion. Effects of clay and compatibilizer fractions and type of compatibilizer on the structure, permeability, and the barrier properties of the nanocomposite films were investigated. PE-g-MA was shown to notably improve the dispersion of clay layers in the polyethylene matrix, and this was examined by atomic force microscopy and X-ray diffraction. The latter tests have also highlighted the importance of the screw configuration: the presence of mixing elements favors the dispersion and distribution of nanoclay. Moreover, differential scanning calorimetry results have shown no significant effect of the clay on the crystallinity of the composite while thermogravimetric analysis tests have demonstrated a decrease of onset and peak of decomposition temperatures. Finally, barrier properties toward water vapor transmission were measured. It was proven that not also clay, but the compatibilizer participated in decreasing the permeability of the film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48589.     

Ruthenium(II)–Arene Thiocarboxylates: Identification of a Stable Dimer Selectively Cytotoxic to Invasive Breast Cancer Cells

Ru^II-arene complexes provide a versatile scaffold for novel anticancer drugs. Seven new Ru^II-arene-thiocarboxylato dimers were synthesized and characterized. Three of the complexes ( 2 a , b and 5 ) showed promising antiproliferative activities in MDA-MB-231 (human invasive breast cancer) cells, and were further tested in a panel of fifteen cancerous and noncancerous cell lines. Complex 5 showed moderate but remarkably selective activity in MDA-MB-231 cells (IC₅₀=39±4 μm Ru). Real-time proliferation studies showed that 5 induced apoptosis in MDA-MB-231 cells but had no effect in A549 (human lung cancer, epithelial) cells. By contrast, 2 a and b showed moderate antiproliferative activity, but no apoptosis, in either cell line. Selective cytotoxicity of 5 in aggressive, mesenchymal-like MDA-MB-231 cells over many common epithelial cancer cell lines (including noninvasive breast cancer MCF-7) makes it an attractive lead compound for the development of specifically antimetastatic Ru complexes with low systemic toxicity.     

Quantitative determination of fluorotelomer sulfonates in groundwater by LC MS/MS

Aqueous film-forming foams (AFFF) are complex mixtures containing fluorocarbon- and hydrocarbon-based surfactants that are used to fight hydrocarbon-fueled fires. The military is the largest consumer of AFFF in the United States, and fire-training activities conducted at military bases have led to groundwater contamination by unspent fuels and AFFF chemicals. A direct-injection, liquid-chromatography tandem mass spectrometry (LC MS/MS) method was developed to quantify a suite of fluorotelomer sulfonate surfactants in groundwater collected from military bases where fire-training activities were conducted. The 4:2, 6:2, and 8:2 fluorotelomer sulfonates were detected and quantified in groundwater from two of the three military bases. The total fluorotelomer sulfonate concentrations observed at Wurtsmith AFB, MI, and Tyndall AFB, FL, ranged respectively from below quantitation (< or = 0.60) to 182 microg/L and from 1100 to 14,600 microg/L. Analyses of a fluorotelomer-based AFFF concentrate by negative ion fast atom bombardment/mass spectrometry and LC MS/MS analyses indicate that the AFFF concentrate contains only a small amount of fluorotelomer sulfonates and that fluoroalkylthioamido sulfonates are the main anionic fluorosurfactant in the mixtures. More research is needed to determine the fate of fluoroalkylthioamido sulfonates in the environment.     

Local Notions of Healthy Eating and National Dietary Guidelines: A Comparison in Vulnerable Salvadoran Communities

This study presents an assessment of local definitions and perceptions concerning healthy eating through a study in four resource-poor border communities in El Salvador. The study included focus groups, key-informant interviews, and observations of the food environment. Local definitions of healthy eating elicited through focus groups were compared to the national Salvadoran dietary guidelines recommendations. The comparison revealed several areas of overlap (including the importance of dietary variety, fruits, and vegetables, among others) and omissions (mention of limiting sweets/candy, salt, sugar, and alcohol). Focus group participants expressed concerns over the origin of their foods and whether food contained harmful chemicals. These conversations also revealed the contradictions between nutrition knowledge and preferences for foods classified as unhealthy. This article concludes with a discussion about barriers to healthy eating identified in the focus groups and through the food environment assessment.     

Monitoring Insulin Aggregation via Capillary Electrophoresis

Early stages of insulin aggregation, which involve the transient formation of oligomeric aggregates, are an important aspect in the progression of Type II diabetes and in the quality control of pharmaceutical insulin production. This study is the first to utilize capillary electrophoresis (CE) with ultraviolet (UV) detection to monitor insulin oligomer formation at pH 8.0 and physiological ionic strength. The lag time to formation of the first detected species in the aggregation process was evaluated by UV-CE and thioflavin T (ThT) binding for salt concentrations from 100 mM to 250 mM. UV-CE had a significantly shorter (5-8 h) lag time than ThT binding (15-19 h). In addition, the lag time to detection of the first aggregated species via UV-CE was unaffected by salt concentration, while a trend toward an increased lag time with increased salt concentration was observed with ThT binding. This result indicates that solution ionic strength impacts early stages of aggregation and β-sheet aggregate formation differently. To observe whether CE may be applied for the analysis of biological samples containing low insulin concentrations, the limit of detection using UV and laser induced fluorescence (LIF) detection modes was determined. The limit of detection using LIF-CE, 48.4 pM, was lower than the physiological insulin concentration, verifying the utility of this technique for monitoring biological samples. LIF-CE was subsequently used to analyze the time course for fluorescein isothiocyanate (FITC)-labeled insulin oligomer formation. This study is the first to report that the FITC label prevented incorporation of insulin into oligomers, cautioning against the use of this fluorescent label as a tag for following early stages of insulin aggregation.     

Exo-mechanism proximity-accelerated alkylations: investigations of linkers, electrophiles and surface mutations in engineered cyclophilin-cyclosporin systems

Investigations on the scope and utility of exo-mechanism proximity-accelerated reactions in engineered receptor-ligand systems are reported. We synthesized a series of electrophilic cyclosporin (CsA) derivatives by varying electrophiles and linker lengths, prepared a series of nucleophilic cysteine mutations on the surface of cyclophilin A (Cyp), and examined their reactivity and specificity in proximity-accelerated reactions. Acrylamide and epoxide electrophiles afforded useful reactivity and high specificity for alkylation of engineered receptors in Jurkat cell extracts. We found that remote cysteines (>17 A from the ligand) could be alkylated with useful rates under physiological conditions. The results from mutations of the receptor surface suggest that the dominant factors governing the rates of proximity-accelerated reactions are related to the local environment of the reactive group on the protein surface. This study defines several parameters affecting reactivity in exo-mechanism proximity-accelerated reactions and provides guidance for the design of experiments for biological investigations involving proximity-accelerated reactions.