UK scenario of islanded operation of active distribution networks with renewable distributed generators

This paper reports on the current UK scenario of islanded operation of active distribution networks with renewable distributed generators (RDGs). Different surveys indicate that the present scenario does not economically justify islanding operation of active distribution networks with RDGs. Anti-islanding protection schemes currently enforce the renewable distributed generators (RDGs) to disconnect immediately and stop generation for grid faults through loss of grid (LOG) protection system. This greatly reduces the benefits of RDG deployment. With rising RDG penetration, much benefit would be lost if the RDGs are not allowed to island only due to conventional operational requirement of utilities. For preventing disconnection of RDGs during LOG, several islanding operation, control and protection schemes are being developed. Technical studies clearly indicate the need to review parts of the ESQCR (Electricity Safety, Quality and Continuity Regulations) for successful islanded operations. Commercial viability of islanding operation must be assessed in relation to enhancement of power quality, system reliability and supply of potential ancillary services through network support. Demonstration projects under Registered Power Zone and Technical Architecture Projects should be initiated to investigate the usefulness of DG islanding. However these efforts should be compounded with a realistic judgement of the associated technical and economic issues for the development of future power networks.     

Integration of GIS and multicriteria decision analysis for urban aquaculture development in Bangladesh

Site selection is a key factor in any aquaculture operation, affecting both success and sustainability as well as solving land or water use conflicts. This study was conducted to identify suitable sites for carp farming development in urban water bodies (UWBs) of Chittagong, Bangladesh using Geographical Information Systems (GIS) based MultiCriteria Evaluation (MCE) of water, soil and infrastructure database. ASTER imagery and 14 thematic layers were analyzed with ENVI and GIS capabilities, and developed a series of GIS models to identify and prioritize the appropriate UWBs for carp farming. The study identified 487 UWBs occupying 362 ha and revealed 280 ha (77%) is the most suitable, 36 ha (10%) is moderately suitable and 46 ha (13%) is not suitable which was consistent with field verification. The results are encouraging for extension of carp culture and diversify the economic activities of the urban dwellers.     

Analytical studies on the temperature distribution in spiral plate heat exchangers: Straightforward design formulae for efficiency and mean temperature difference

The temperature distribution in spiral plate heat exchangers has been calculated numerically to obtain the efficiency and the logarithmic mean temperature difference (LMTD) correction factors F as a function of the number of transfer units N, the number of turns n, and the heat capacity rate ratio C. It has been found that the LMTD correction factors, when plotted against the number of transfer units per turn N/n, fall approximately on a single curve. That curve for balanced countercurrent operation (C = −1) can be very closely represented by the simple formula F = (n/N)tanh(N/n). From that simple analytic representation of our numerical results it was concluded that a simpler physical model might exist to represent the overall behaviour of a spiral plate heat exchanger equally well. In fact, a countercurrent cascade of n cocurrent heat exchangers does result exactly in the above-mentioned formula for the LMTD correction factor. From that model the F-factors for other heat capacity rate ratios C (−1 < C 0) can also be calculated and they are in sufficient agreement with the numerical results.     

The effects of pressure and temperature on the catalytic oxidation of hydrogen sulfide in natural gas and regeneration of the catalyst to recover the sulfur produced

The influence of pressure up to 5600 kPa and temperature up to 175 °C on the oxidation of low concentrations of H₂S in natural gas was studied in a fixed bed reactor over an activated carbon catalyst. Operation of this system at 5600 kPa provides higher catalyst activity (virtually 100% H₂S conversion) over a longer period of time and with lower selectivity to SO₂ than when operated at atmospheric pressure. The desorption of sulfur from a loaded catalyst occurs first from the macropores (> 100 nm) of the catalyst which contain a substantial portion of the sulfur load and then from the micropores (< 100 nm). This study also indicated that the sulfur recovery process is both rapid and effective at 327°C.     

Domestic Water and Sanitation in Cyclones and Floods in Bangladesh and a Proposed Research Agenda

ABSTRACT

Water is one of the top priority item s i relief activities but the appropriateness and effectiveness of this activity may be questioned. Water and sanitation (WS) are inseparable and together they play major roles in the transmission of the pathogen of diarrhoeal disease. Thousands of people die or suffer from WS-related diseases during postdisaster periods. Here we present WS-related experiences gained after Bangladesh's 1991 cyclone and the views of participants in a regional and a national (local) workshop on this matter held in Bangladesh. About 63 per cent of the water purifying tablets (WPTs) distributed after the 1991 cyclone were found to have lost potency Relief personnel lack basic knowledge about WS practices and the management of WS provision. Participants in the two workshops documented serious problems i this field at both regional and national levels. Major issues for research may include: an appropriate environmental preparedness plan; appropriate waste disposal technologies; appropriate water treatment methods; self- help activities during vulnerable periods; and health education related to WS in disaster situations.     

Regional variability of disinfection by-products in Canadian drinking water

The chlorination of drinking water forms various disinfection by-products (DBPs), some of which present potential risks to humans. This study investigates occurrences, trends, and regional and seasonal variability of DPBs in two Canadian provinces: Ontario and Quebec. The findings demonstrate that trihalomethanes (THMs) and haloacetic acids (HAAs) can be represented better by region-based analysis than by province-based analysis. THMs in summer months are much higher than in cold months, while HAAs show variable results. The seasonal and regional variability of DBPs can have implications for the selection of DBP sampling locations, sampling frequency, regulatory limitations of DBPs, exposure analysis and risk characterization.     

Microstrip rectangular resonators on ferrimagnetic substrates

The resonant frequency, bandwidth, efficiency and resonant length of a rectangular microstrip resonator on a ferrimagnetic substrate are derived theoretically and are computed for a typical ferrite substrate. The computed values are compared with those of a similar microstrip antenna on a dielectric substrate.     

UK scenario of islanded operation of active distribution networks with renewable distributed generators

This paper reports on the current UK scenario of islanded operation of active distribution networks with renewable distributed generators (RDGs). Different surveys indicate that the present scenario does not economically justify islanding operation of active distribution networks with RDGs. With rising DG penetration, much benefit would be lost if the DGs are not allowed to island only due to conventional operational requirement of utilities. Technical studies clearly indicate the need to review parts of the Electricity Safety, Quality and Continuity Regulations (ESQCR) for successful islanded operations. Commercial viability of islanding operation must be assessed in relation to enhancement of power quality, system reliability and supply of potential ancillary services through network support. Demonstration projects under Registered Power Zone and Technical Architecture Projects should be initiated to investigate the utility of DG islanding. However these efforts should be compounded with a realistic judgement of the associated technical and economic issues for the development of future power networks beyond 2010.     

Poly dimethylsiloxane/carbon nanofiber nanocomposites: fabrication and characterization of electrical and thermal properties

This article presents the fabrication and characterization of poly dimethylsiloxane/carbon nanofiber (CNF)-based nanocomposites. Although silica and carbon nanoparticles have been traditionally used to reinforce mechanical properties in PDMS matrix nanocomposites, this article focuses on understanding their impacts on electrical and thermal properties. By adjusting both the silica and CNF concentrations, 12 different nanocomposite formulations were studied, and the thermal and electrical properties of these materials were experimentally characterized. The developed nanocomposites were prepared using a solvent-assisted method providing uniform dispersion of the CNFs in the polymer matrix. Scanning electron microscopy was employed to determine the dispersion of the CNFs at different length scales. The thermal properties, such as thermal stability and thermal diffusivity, of the developed nanocomposites were studied using thermogravimetirc and laser flash techniques. Furthermore, the electrical volume conductivity of each type of nanocomposite was tested using the four-probe method to eliminate the effects of contact electrical resistance during measurement. Experimental results showed that both CNFs and silica were able to impact on the overall properties of the synthesized PDMS/CNF nanocomposites. The developed nanocomposites have the potential to be applied to the development of new load sensors in the future.     

Structure-property relations for a phase-pure,nanograined tetragonal zirconia ceramic stabilized with minimum CaO doping

Dense (~97%) CaO-stabilized ZrO₂ ceramic was stabilized with minimum (3 mol%) doping (reported to date) and processed via conventional sintering at a low temperature (~1200°C); compositional analysis via X-ray florescence confirmed the CaO doping accuracy. Phase-pure tetragonal structure (characterized via both X-ray diffraction and Raman spectroscopy) along with uniform nanograins (90 nm) of the ceramic ensured the evolution of no monoclinic phase even after vigorous low-temperature degradation experiments (both thermal and hydrothermal aging for 80-100 h). The sintered ceramic recorded a high hardness (~15 GPa); the indentation toughness value was also comparable to a 3 mol% yttria-stabilized zirconia system. The remarkable structure–property correlations in the 3 mol% CaO-stabilized ZrO₂ ceramic suggests that the same may be worth examining for suitable future applications (e.g., in dental ceramics).