Ge-Si-O phase separation and Ge nanocrystal growth in Ge:SiO(x)/SiO(2) multilayers--a new dc magnetron approach

Ge:SiO(x)/SiO(2) multilayers are fabricated using a new reactive dc magnetron sputtering approach. The influence of the multilayer stoichiometry on the ternary Ge-Si-O phase separation and the subsequent size-controlled Ge nanocrystal formation is explored by means of x-ray absorption spectroscopy, x-ray diffraction, electron microscopy and Raman spectroscopy. The ternary system Ge-Si-O reveals complete Ge-O phase separation at 400?°C which does not differ significantly to the binary Ge-O system. Ge nanocrystals of < 5?nm size are generated after subsequent annealing below 700?°C. It is shown that Ge oxides contained in the as-deposited multilayers are reduced by a surrounding unsaturated silica matrix. A stoichiometric regime was found where almost no GeO(2) is present after annealing. Thus, the Ge nanocrystals become completely embedded in a stoichiometric silica matrix favouring the use for photovoltaic applications.     

3D Microstructures of Liquid Crystal Networks with Programmed Voxelated Director Fields

The shape-shifting behavior of liquid crystal networks (LCNs) and elastomers (LCEs) is a result of an interplay between their initial geometrical shape and their molecular alignment. For years, reliance on either one-step in situ or two-step film processing techniques has limited the shape-change transformations from 2D to 3D geometries. The combination of various fabrication techniques, alignment methods, and chemical formulations developed in recent years has introduced new opportunities to achieve 3D-to-3D shape-transformations in large scales, albeit the precise control of local molecular alignment in microscale 3D constructs remains a challenge. Here, the voxel-by-voxel encoding of nematic alignment in 3D microstructures of LCNs produced by two-photon polymerization using high-resolution topographical features is demonstrated. 3D LCN microstructures (suspended films, coils, and rings) with designable 2D and 3D director fields with a resolution of 5 µm are achieved. Different shape transformations of LCN microstructures with the same geometry but dissimilar molecular alignments upon actuation are elicited. This strategy offers higher freedom in the shape-change programming of 3D LCN microstructures and expands their applicability in emerging technologies, such as small-scale soft robots and devices and responsive surfaces.     

The Effects of Electromagnetic Brake on Liquid Steel Flow in Thin Slab Caster

Computational fluid dynamics (CFD) model with magneto hydro dynamics (MHD) is developed for a thin slab caster to investigate the effects of electromagnetic brake (EMBr) on liquid steel flow in continuous casting mold and to determine the EMBr practices which lead to optimal flow structure. Particle Image Velocimetry (PIV) tests in water model and meniscus flow measurements in real caster are performed to validate the predictions obtained with CFD models. The performance of different submerged entry nozzle designs, SEN 1 and SEN 2, are evaluated. The effects of nozzle submergence in relation to the applied magnetic field on mold flow structure are quantified. There are significant differences between flow structures obtained with SEN 1 and SEN 2, even though both designs have fundamental similarities and contain four ports. EMBr mainly reduces the meniscus velocities for SEN 2 as opposed to the foremost influence of EMBr for SEN 1 that is to significantly slow down the downward jet coming from the bottom ports. In addition, reducing the EMBr strength for shallow nozzle submergence and increasing the EMBr strength for deep nozzle submergence help to maintain similar meniscus activity for all conditions.     

Overview of Compaction Data Analysis Techniques

In this review article, the techniques that have been utilized to assess the compactional behaviour of pharmaceutical materials were presented, and the advantages, limitations and modifications of some of these methods were discussed. It was concluded that despite some of these techniques, such as Heckel equation, F-D curves, energy of compaction, tensile strength and hardness measurements, have received considerable attention, none of them was found to be satisfactory for the comprehensive analysis of the mechanisms involved in the compaction of the solid particulate matter.     

Formulation and Compaction of Microspheres

The factors affecting the tabletability of formulations containing uncoated and/or coated microspheres were discussed by presenting a case study. The size and shape, as well as surface properties of microspherical particles, the type and amount of coating agent, selection of the external additives, and the rate and magnitude of the pressure applied were found to be the most critical factors to be considered in order to obtain and maintain the desired drug release properties of the microspheres. It was found that microcrystalline cellulose was needed in order to produce satisfactory beads in terms of size, shape and surface characteristics. The microsphere formulations, which were found to be highly sensitive to lubrication, were more compressible than their powder forms, but produced much weaker tablets. When coated with Surelease, increasing the amount of coating on the pellets reduced the tensile strength of their compacts. Compaction of the microspheres at high velocities resulted in a decrease in the tensile strength values and an increase in the volumetric strain recovery values. Dissoultion studies revealed that, regardless of the amount of coating applied, the coated microspheres lost their sustained release properties during compaction.     

Effects of minor Cu and Si additions on glass forming ability and mechanical properties of Co-Fe-Ta-B Bulk metallic glass

Effect of Cu and Si substitutions for Co and B on the glass forming ability (GFA) of Co_(43-x)Cu_xFe₂₀Ta_5.5B_(31.5-x)Si_y (x=0-1.5 and y=5-10) were systematically investigated by X-ray diffraction, optical microscopy, scanning electron microscopy, and differential scanning calorimetry. In order to evaluate the contribution of copper and silicon, appropriate amounts of copper and silicon were individually introduced to the base alloy composition. By using the effects of copper and silicon together, significant enhancement was obtained and the critical casting thickness (CCT) of the base alloy was increased three times from 2 mm to 6 mm. Moreover, mechanical properties of the alloys were examined by compression tests and Vickers hardness measurements. The compression test results revealed that the glassy alloys having enhanced GFA shows high strength of about 3500-4000 MPa. In addition, existence of (Co,Fe)₂B and (Co,Fe)_20.82Ta_2.18B₆ crystalline phases in glassy matrix influences the hardnesses of the alloys compared to monolitic glassy structure having hardness of about 1200 Hv.     

Determination of fatty acids and some undesirable fatty acid isomers in selected Turkish margarines

The fatty acid composition and total trans fatty acid content in 10 margarines produced in Turkey were determined by capillary gas chromatography and Fourier transform‐infrared spectroscopy (FT‐IR) spectroscopy. The fatty acid composition ranged as follows: saturated fatty acids, C16:0 (palmitic) 11.3 to 31.8% and C18:0 (stearic) 5.7 to 8.7%, monounsaturated fatty acids, C18:1 (oleic) 21.8 to 35.7% and C18:1 trans isomers 0.4 to 27.4%, polyunsaturated fatty acid, C18:2 linoleic acid 5.2 to 40.2%. Some positional isomers of C18:1 as cis‐11‐octadecenoic acid varied from 0.7 to 4.6% and cis‐13 trace to 2.4%. The total trans fatty acid contents were between 0.9 and 32.0% when measured with capillary gas chromatography and between 0 and 30.2% with FT‐IR spectroscopy. Some of the margarines analyzed contained trace amount of trans fatty acids which could not be detected by FT‐IR spectroscopy.     

Coating of modified poly(ethylene terephthalate) fibers with sericin-capped silver nanoparticles for antimicrobial application

Polymer Bulletin - In this work, a kind of amine-type PET fibers was synthesized by reacting hexamethylenediamine (HMDA) with methacrylic acid-g-poly(ethylene terephthalate) (PET-g-MAA) fibers for...     

Layered clay/epoxy nanocomposites: Thermomechanical,flame retardancy,and optical properties

In this study, layered clay/polymer nanocomposites were developed based on epoxy resins and montmorillonite as the nanoplatelet reinforcement. Clay particles were treated with hexadecyltrimethylammonium chloride (HTCA) through an ion exchange reaction. In this way, Na⁺ interlayer cations of the clay is exchanged with onium cation of the surfactant that turns the hydrophilic clays (MMT) to organophilic (OMMT) characteristics. Thermal analysis results revealed that the glass transition temperature (T_g) and the dynamic mechanical properties including the storage and loss modulus of the neat epoxy resin increases by the incorporation of clay particles. It was also found that flame resistance of the polymer is improved by the addition of the clay particles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Discriminating schizophrenia and schizo-obsessive disorder: a structural MRI study combining VBM and machine learning methods

Schizo-obsessive disorder is characterized by the clinical syndrome in which comorbid obsessive–compulsive disorder accompanies schizophrenia. A substantial number of studies have investigated the neuropsychological and clinical differences between schizophrenia and schizo-obsessive disorder. However, the neurostructural differences between these two groups have not been adequately investigated. The aim of this study was to explore gray matter differences between schizophrenia and schizo-obsessive patients using voxel-based morphometry and support vector machines combined with feature selection algorithm. Twenty-three schizophrenia and 23 schizo-obsessive patients matched by age, gender and handedness were recruited. Clinical assessments were completed in addition to high-resolution structural MRI scanning. Group differences were investigated using contrast maps, and significant regions were subjected to a feature selection and support vector machine hybrid model. In addition, voxel-of-interest values for the commonly shared brain areas between schizophrenia and OCD reported in previous meta-analyses were also used as inputs in this step. The results showed that schizo-obsessive patients had greater gray matter densities in paracentral areas (including supplementary motor area) and middle cingulate gyrus than schizophrenia patients. These brain areas together with the fronto-subcortical areas could successfully discriminate two groups with an accuracy of 78.26 %. Our results provide the first neuroanatomical evidence that schizo-obsessive disorder and schizophrenia may be two distinct clinical entities. Based on these findings, considering schizo-obsessive disorder as a subtype of schizophrenia is discernible.