An Exemplar Imidazoline Surfactant for Corrosion Inhibitor Studies: Synthesis,Characterization, and Physicochemical Properties

An optimized one-pot recipe has been developed to synthesize a surfactant molecule, referred to as OMID, consisting of an imidazoline head group and aliphatic tail, which is an exemplar corrosion inhibitor for carbon steel in acidic solutions. As evidenced by gas chromatography, ¹H and ¹³C nuclear magnetic resonance, and Fourier-transform infrared data, a high-purity product was achieved without the use of either a solvent or catalyst. Critical micelle concentration values and corrosion inhibition efficiencies ( η %) were determined in aqueous solutions of hydrochloric acid and sulfuric acid using surface tensiometry and linear polarization resistance measurements, respectively. Hydrolysis of the imidazoline head group as a function of pH (0–11) was explored with ultraviolet–visible absorption spectroscopy. In addition, N 1s and C 1s X-ray photoelectron spectroscopy data were acquired from both surface-adsorbed OMID and a multilayer of the imidazoline head group of OMID. These latter data are highly relevant to those attempting to understand OMID inhibition chemistry.     

Sex and Depot Differences in Palmitoleic Acid Content of Human Blood and Fat

Palmitoleic acid has been classified as an insulin-sensitizing lipokine, but evidence for this from human studies has been inconsistent. We hypothesized that this is related to either the types of samples or conditions under which samples are collected. We measured plasma palmitoleic acid and total free fatty acids (FFA) using ultra-performance liquid chromatography in blood samples collected from 34 adults under a variety of conditions. We collected duplicate samples of adipose (n = 10), FFA (n = 9), and very low density lipoprotein triacylglycerol (VLDL-TAG) (n = 7) to measure the palmitoleic acid as a percentage of total fatty acids. We tested whether the percentage of palmitoleic acid was correlated with insulin resistance, as measured by homeostatic model of insulin resistance (HOMA-IR). Adipose stearoyl-coenzyme A desaturase 1 (SCD-1) protein was measured by capillary Western blotting. FFA-palmitoleic acid percentage increased as a function of total FFA and was greater (p < 0.005) in females than males. Adipose palmitoleic acid percentage was greater in females than males (p < 0.001), as was adipose SCD-1. Palmitoleic acid was greater in femoral fat than in abdominal fat in both females and males (p < 0.001), and correlated positively with HOMA-IR only in females. The test–retest reliability values for percentage palmitoleic acid were 7 ± 10% for adipose, 24 ± 26% for VLDL, and 53 ± 31% for FFA. Because FFA-palmitoleic acid percentage varies as a function of total FFA, investigators should re-evaluate how palmitoleic acid data is presented. The positive relationship between adipose palmitoleic acid and HOMA-IR in females suggests that it is not a potent insulin-sensitizing lipokine in humans.     

Thermo-rheological analysis of various chain extended recycled poly(ethylene terephthalate)

Three chain extenders, pyromellitic dianhydride (PMDA), ethylene carbonate (EC), and a polymeric-epoxide, were investigated for improving recycled p(ethylene terephthalate) (r-PET) properties with melt extrusion. The amount of additives and processing temperatures were also varied to check for melt degradation. Small amplitude oscillatory shear experiments were performed to probe rheological changes with different chain extenders. Capillary rheometry with haul-off was also performed to measure extensional viscosity and melt strength. Higher loadings of the chain extenders were found to improve properties of r-PET. These chain extenders definitely increased melt viscosities when incorporated at the higher level of the ranges examined, matching that of virgin PET. EC addition resulted in high shear thinning of the polymer. Epoxy and PMDA added to r-PET produced products with the same extensional viscosity as v-PET. Haul-off experiments demonstrate superior performance by epoxy-modified r-PET compared to v-PET.     

Additional high-energy milling to enhance the performance of porcelain stoneware manufacturing

Porcelain stoneware tile is the best class of ceramic tiles regarding technical performance. Low porosity and high glass content are some of its highlighted characteristics. The manufacturing cost is highly dependent on the feldspar content and the processing flow rate. Certain technical bottlenecks in the manufacturing steps, such as milling, forming, and firing, are intrinsically associated with limitations in the processing properties, such as the dry strength, bulk density, and pyroplastic deformation. In this work, improvements in these properties were achieved using high-energy milling (HEM) after conventional milling (CM). This study was carried out on a pilot industrial scale in the milling stage. Six experimental runs were evaluated. Slurries were spray-dried. The powders were humidified with 6.5% moisture. Specimens were conformed under a specific pressure of 45 MPa. The firing was performed using temperature ranging from 1150 to 1230°C. The use of HEM, in comparison to traditional milling for the similar particle-size distributions, has increased the dry density, +0.2 g.cm⁻³, dry bending strength, +1.0 MPa, and decreased the pyroplastic deformation index, −1.10⁻⁵ cm⁻¹. These results allow an estimated thickness reduction of 10%.     

Durability of YSZ coated Ti2AlC in 1300°C high velocity burner rig tests

A thermal barrier coating (TBC) system survived 500 hours in aggressive, 1300°C burner rig testing. The yttria-stabilized zirconia (7YSZ) TBC was plasma sprayed on an oxidation-resistant Ti₂AlC-type MAX phase and tested in a jet fuel burner at 100 m/s, using 5 hours cycles. No coating spallation or surface recession was observed; Al₂O₃-scale growth produced a slight 2.4 mg/cm² mass gain. The coating surface exhibited craze-cracked colonies of [111]_flourite textured columns, with no visible moisture attack. The 20 μm alumina scale remained intact under the YSZ face, about twice that producing failure for TBC/superalloy systems. TiO₂ nodules, initially formed on the uncoated backside, were removed, and Al₂O₃ was etched through volatile hydroxides formed in water vapor (~10%). Overall, the test indicated exceptional stability of the YSZ/Al₂O₃/Ti₂AlC system under turbine conditions due in large part to close thermal expansion matching.     

Processing and electromechanical properties of high-coercive field ZnO-doped PIN-PZN-PT ceramics

This study explores sintering and piezoelectricity of ZnO-doped perovskite Pb(In_1/2Nb_1/2)O₃-Pb(Zn_1/3Nb_2/3)O₃-PbTiO₃ (PIN-PZN-PT) ceramics. The enhanced densification of ZnO-doped PIN-PZN-PT is attributed to the formation of oxygen vacancies by the incorporation of Zn²⁺ into the perovskite B-site and increased rate of bulk diffusion relative to undoped PIN-PZN-PT. Incorporation of Zn²⁺ into the perovskite lattice increased the tetragonal character of PIN-PZN-PT as demonstrated by tetragonal peak splitting and increased Curie temperature. Sintering in flowing oxygen reduced the solubility of Zn²⁺ in the perovskite lattice and resulted in rhombohedral PIN-PZN-PT. Sintering in oxygen prevented secondary phase formation which resulted in a high-piezoelectric coefficient (d₃₃ – 550 pC/N), high-coercive field (E_c – 13 kV/cm), and high-rhombohedral to tetragonal phase transition temperature (T_r-t – 165°C). We conclude that ZnO-doped PIN-PZN-PT ceramics are excellent candidates for high-power transducer applications.     

Low-defect graphene–polyamide-6 composites and modeling the filler–matrix interface

Low-defect graphene (G) was prepared via the thermal reduction of expanded graphite in a carbon monoxide environment. G exfoliated and suspended in p-xylene was compounded in polyamide-6 (PA6) with filler content ranging from 0.1 to 6%·w/w. Interactions between G and PA6 were characterized via Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). Elastic modulus (E) had increased with increasing G content, and had exceeded idealized Halpin–Tsai predictions at 0.1–1.0%·w/w G content, indicating good dispersion and filler–matrix interactions. However, further analysis with a modified rule-of-mixtures (RoM) mathematical model indicate that the quality of filler–matrix interface had been suboptimal and had deteriorated drastically with increasing G content. The evaluation of interface quality is in agreement with observed changes in thermal behavior trends. The modified RoM can be applied as a useful tool toward interpreting the mechanical properties of graphene-reinforced composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48630.     

Ubiquitin C-Terminal Hydrolase L1: Biochemical and Cellular Characterization of a Covalent Cyanopyrrolidine-Based Inhibitor

The deubiquitinase (DUB) ubiquitin C-terminal hydrolase L1 (UCHL1) is expressed primarily in the central nervous system under normal physiological conditions. However, UCHL1 is overexpressed in various aggressive forms of cancer with strong evidence supporting UCHL1 as an oncogene in lung, glioma, and blood cancers. In particular, the level of UCHL1 expression in these cancers correlates with increased invasiveness and metastatic behavior, as well as poor patient prognosis. Although UCHL1 is considered an oncogene with potential as a therapeutic target, there remains a significant lack of useful small-molecule probes to pharmacologically validate in vivo targeting of the enzyme. Herein, we describe the characterization of a new covalent cyanopyrrolidine-based UCHL1 inhibitory scaffold in biochemical and cellular studies to better understand the utility of this inhibitor in elucidating the role of UCHL1 in cancer biology.     

Crossing the Border: From Keto- to Imine Reduction in Short-Chain Dehydrogenases/Reductases

The family of NAD(P)H-dependent short-chain dehydrogenases/reductases (SDRs) comprises numerous biocatalysts capable of C=O or C=C reduction. The highly homologous noroxomaritidine reductase (NR) from Narcissus sp. aff. pseudonarcissus and Zt_SDR from Zephyranthes treatiae, however, are SDRs with an extended imine substrate scope. Comparison with a similar SDR from Asparagus officinalis (Ao_SDR) exhibiting keto-reducing activity, yet negligible imine-reducing capability, and mining the Short-Chain Dehydrogenase/Reductase Engineering Database indicated that NR and Zt_SDR possess a unique active-site composition among SDRs. Adapting the active site of Ao_SDR accordingly improved its imine-reducing capability. By applying the same strategy, an unrelated SDR from Methylobacterium sp. 77 (M77_SDR) with distinct keto-reducing activity was engineered into a promiscuous enzyme with imine-reducing activity, thereby confirming that the ability to reduce imines can be rationally introduced into members of the “classical” SDR enzyme family. Thus, members of the SDR family could be a promising starting point for protein approaches to generate new imine-reducing enzymes.