Licence de brevet et partage du risque: Résultats de simulation

Annals of Telecommunications - Le partage du risque est une des raisons les plus souvent avancées pour expliquer les clauses financières des contrats de licence. Pour autant, aucune...     

Effects of fade distribution on a mobile satellite down-link and up-link performance in a frequency reuse cellular configuration

In a mobile satellite system with a frequency reuse cellular configuration, significant co-channel interference can be experienced due to the antenna side-lobe level. The signal will be subjected not only to its own fading, but also to the effect of the varying degree of fading on the co-channel interferer, and this interference will behave differently in the up and in the down-link. This paper presents a quantitative evaluation of the combined effects of fades and co-channel interference on a mobile satellite link.     

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin-Film Solar Cell

Exhibiting outstanding optoelectronic properties, antimony selenide (Sb₂Se₃) has attracted considerable interest and has been developed as a light absorber layer for thin-film solar cells over the decade. However, current state-of-the-art Sb₂Se₃ devices suffer from unsatisfactory “cliff-like” band alignment and severe interface recombination loss, which deteriorates device performance. In this study, the heterojunction interface of an Sb₂Se₃ solar cell is improved by introducing effective aluminum (Al³⁺) cation into the CdS buffer layer. Then, the energy band alignment of Sb₂Se₃/CdS:Al heterojunction is modified from a “cliff-like” structure to a “spike-like” structure. Finally, heterojunction interface engineering suppresses recombination losses and strengthens carrier transport, resulting in a high efficiency of 8.41% for the substrate-structured Sb₂Se₃ solar cell. This study proposes a facile strategy for interfacial treatment and elucidates the related carrier transport enhancement mechanism, paving a bright avenue to overcome the efficiency bottleneck of Sb₂Se₃ thin-film solar cells.     

Tuning Thermal Transport Through Atomically Thin Ti3C2Tz MXene by Current Annealing in Vacuum

Heat transport across vertical interfaces of heterogeneous 2D materials is usually governed by the weak Van der Waals interactions of the surface‐terminating atoms. Such interactions play a significant role in thermal transport across transition metal carbide and nitride (MXene) atomic layers due to their hydrophilic nature and variations in surface terminations. Here, the metallicity of atomically thin Ti₃C₂T_z MXene, which is also verified by scanning tunneling spectroscopy for the first time, is exploited to develop a self‐heating/self‐sensing platform to carry out direct‐current annealing experiments in high (<10^?8 bar) vacuum, while simultaneously evaluating the interfacial heat transport across a Ti₃C₂T_z/SiO₂ interface. At room temperature, the thermal boundary conductance (TBC) of this interface is found, on average, to increase from 10 to 27 MW m^?2 K^?1 upon current annealing up to the breakdown limit. In situ heating X‐ray diffraction and X‐ray photo‐electron spectroscopy reveal that the TBC values are mainly affected by interlayer and interface spacing due to the removal of absorbents, while the effect of surface termination is negligible. This study provides key insights into understanding energy transport in MXene nanostructures and other 2D material systems.     

Experimental Study of an Adding Interferometer at Millimeter Waves

In order to study an original detection architecture for future cosmology experiments based on wide band adding interferometry, we have tested a single baseline bench instrument based on commercial components. The instrument has been characterized in the laboratory with a wide band power detection setup. A method which allows us to reconstruct the complete transfer function of the interferometer has been developed and validated with measurements. This scheme is useful to propagate the spurious effects of each component till the output of the detector.     

A Proof of the Security of Quantum Key Distribution

We prove the security of theoretical quantum key distribution against the most general attacks which can be performed on the channel, by an eavesdropper who has unlimited computation abilities, and the full power allowed by the rules of classical and quantum physics. A key created that way can then be used to transmit secure messages such that their security is also unaffected in the future.     

Nonmonotonic Coupled Dissolution-Precipitation Reactions at the Mineral–Water Interface

Dissolution is inherent to fluid-mineral systems. Yet its impact on minerals reacting with electrolytes is overlooked. Here, a novel nonmonotonic behavior for the surface interactions of carbonates (calcite and Mg-calcite) with organic acids is reported. Applying a bioinspired approach, Mg-calcite sensors via amorphous precursors, avoiding any preconditioning with functional groups are synthesized. A quartz crystal microbalance is used to study the mass changes of the mineral on contact with organic acids under varying ionic conditions, temperatures, and flow velocities. Supported by confocal Raman microscopy and potentiometric titrations, nonmonotonous mass developments are found as a function of Ca²⁺ concentration and flowrate, and attributed to three coupled chemical reactions: i) carbonate dissolution via Ca²⁺ ion complexation with organic molecules, and the formation of organo-calcium compounds as ii) a surface phase at the mineral–water interface, and iii) particles in the bulk fluid. These processes depend on local ion contents and the precipitation onset (i.e., saturation index) of organo-calcium salts, both of which substantially differ in the bulk fluid and in the fluid boundary layer at mineral interfaces. This continuum between dissolution and precipitation provides a conceptual framework to address reactions at mineral interfacial across disciplines including biomineralization, ocean acidification and reservoir geochemistry.     

Estimation of bacterial production through the coupling of (methyl 3H) Thymidine incorporation and several parameters over a Microcystis aeruginosa bloom in a hypereutrophic reservoir

The coupling of the changes in bacterial quantitative and metabolic aspects during Microcystis aeruginosa bloom conditions together with several environmental parameters was studied in the hypereutrophic Villerest reservoir, France. Bacterial abundance varied from 5.20 to 21.28 × 10⁶ bacteria-mL^?1, while bacterial biomass ranged between 75 and 507 μg C mL^?1. These results confirmed the highly eutrophic status of the Villerest reservoir. The relative quantitative importance of attached bacteria increased as Microcystis proliferated. Methyl-³H incorporation and D-(U-¹⁴C) glucose uptake varied from 8.99 to 60.57 × 10⁶ cells-mL^?1, and 0.016 to 1.587 μg CL^?1 h^?1, respectively. Correlations between several abiotic and biotic parameters showed that phytoplankton regulated bacterial growth by releasing organic carbon which is directly uptaken by heterotrophic bacteria. In the hypolimnion, the sedimentation of decaying algae represented a substantial substrate for bacterial growth.     

Simulation of the High-Frequency Response of a Heterogeneous Ground through the Finite Difference Technique

To simulate the propagation of an electromagnetic plane wave in an inhomogeneous ground, the finite difference approach can be used. One of the main problems in using this method is imposing the boundary conditions near the ground surface, especially at high frequency. Indeed, for the E polarization, the upper top of the numerical grid must be sufficiently far away from the air-ground interface in order to neglect the field due to the heterogeneities and the discretization of the atmosphere is necessary. For magneto-telluric modeling, improved boundary conditions have already been proposed. This paper deals with a new condition, valid everywhere in air and which can be applied for E and H polarization. Thus even at high frequency, as for radar applications, only one line is added to the grid discretizing the ground.