The EuQoS system: a solution for QoS routing in heterogeneous networks [Quality of Service based Routing Algorithms for Heterogeneous Networks]

EuQoS is the acronym for "end-to-end quality of service support over heterogeneous networks", which is a European research project aimed at building an entire QoS framework, addressing all the relevant network layers, protocols, and technologies. This framework, which includes the most common access networks (xDSL, UMTS, WiFi, and LAN) is being prototyped and tested in a multidomain scenario throughout Europe, composing what we call the EuQoS system. In this article we present the novel QoS routing mechanisms that are being developed and evaluated in the framework of this project. The preliminary performance results validate the design choices of the EuQoS system, and confirm the potential impact this project is likely to have in the near future     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.     

Indoor Ad Hoc Proximity-Location Sensing for Service Provider Selection

There are protocols that can be used by mobile clients to discover service providers in foreign networks to which they get attached, e.g., SDP of Bluetooth and SLP of IETF. These protocols do address service discovery, but do not address the selection of a service provider among a set of candidates according to a physical proximity of the client and service provider. The goal of the research described in this paper is to integrate proximity-based selection mechanisms to service discovery protocols. We present in this paper protocols that allow nomadic clients to discover and select service providers according to physical proximity.     

Building an index of activity of inhabitants from their activity on the residential electrical power line

In the framework of context awareness within the home, our team is currently assessing the unobtrusive detection of inhabitants' activity through the monitoring of their use and consumption of electricity. The objective is to develop a system for the remote monitoring of large populations of elderly people living independently at home. To be readily deployable on the field, such a system must be minimally intrusive both for the home environment and for the field professionals (paramedics and social workers) visiting the patients at home. We carried out two successive field experiments to evaluate and to improve our system designed to deliver a single index of daily activity. The first experiment involved 13 elderly persons over a nine-month period (84,240 h data recorded) and the second one 12 elderly over six months (51,840 h). We evaluated both the relevance of the index and the acceptability of the system as a whole. We discovered that electrical activity is a kind of unique "signature" of each person's activity. Moreover, this profile provides unexpected information on the health status of the subject. We confirmed that the system was unobtrusive and well accepted both by the subjects and by the professionals involved. Our unique index of activity, and its trend over time, can provide timely information to the professionals on the patient.     

Picosecond photodiffraction in semiconductor multiquantum wells and microcavities

We study the transient gratings photogenerated in the picosecond regime in three families of structures, namely : - structures of thickness in the order of one micron, including quantum wells (GaAs/GaAlAs, CdTe/ CdZnTe). A transmission modulation due to the electric field has been observed. We show that, in accordance with our calculations, this modulation is screened faster than 10 ps at a fluence of a few µJ/cm2. - A structure including GalnAs/GalnAsP MQWS in a cavity. This structure shows a top diffraction efficiency of 2.5 × 10-² at 1.55 µm for an energy of excitation in the order of 100 µJ/cm2. The diffraction efficiency exhibits several oscillations due to Fabry-Pårot effects. By introducing cavity effects in our model, we show that the diffraction efficiency is amplified by more than a factor 2 with respect to the no-cavity case. Calculations show that the diffraction efficiency may reach 6 × 10-² around 1.625 µm, for a front mirror reflectivity of 90 %. - Structures including bulk GaAs microcavities. The risetime is lower or in the order of 1 ps while the diffraction efficiency attains 1 %, with an average power of 4 mW (i.e. an energy of 2 µJ/cm²/pulse), compatible with a commutation of packets at 80 MHz.     

Low response time context awareness through extensible parameter adaptation with ORCA

Ubiquitous computing applications or widespread robots interactions execute in unforeseen environments and need to adapt to changeful available services, user needs, and variations of the environment. Context-awareness ability addresses such a need, enabling, through adaptation rules, applications to react to the perceived dynamic variations. Responses to adaptation have to be quick enough to maximize the time during which the application is coherent with its environment. Adaptation rules, associating variations of the environment to application reactions, are usually established at design time. However, in unforeseen and partially anticipated environments, we claim that adaptation rules have to be dynamically extensible to match previously unexpected variations. Our approach enables rule composition and ensures a deterministic result. We propose to use parameter adaptation to quickly respond to environmental variations and dynamic compositional adaptation to provide extensibility to the parameter adaptation. To foster even lower response times, we internalize context-awareness processing and decision into the application.     

Standards and industrial property

This article is primarily concerned with standards seen as a means for collective appropriation of technological information. It begins with an attempt to throw light on the relationships between standards, patents and licenses. Then we develop a two-stage duopolistic model whereby each firm must decide on a programme of standardization before choosing its level of production. The risks of multiple or inefficient equilibria are strong enough to justify the intervention of standardization organizations to inform and coordinate individual firms. But the paper also explains why some organizations likeetsi try to play a new role by promoting open access to master patents when used in the definition of a standard.     

Implementing polarization shift keying over satellite – system design and measurement results

Polarization shift keying (PolSK) is a digital modulation technique using the state of polarization of an electromagnetic wave as the signalling quantity. PolSK comes from fibre communications, where the channel offers two orthogonal states of polarization. This article develops on the idea to adapt this technology to satellite communications, where similar channel conditions exist. For this purpose, a digital PolSK modem was implemented on a programmable logic board. A proposal for constellation design as well as thoughts on synchronization of PolSK over satellite is presented. The modem was used to demonstrate a 16‐state Polarization Shift Keying link over a commercial satellite in K_u band. Measurements have been conducted in a back‐to‐back setup on intermediate frequency and on a K_u band transponder simulator to assess the impact of path‐length differences, carrier recovery and non‐linearity. Copyright © 2015 John Wiley & Sons, Ltd.     

Layered Orthorhombic Nb2O5@Nb4C3Tx and TiO2@Ti3C2Tx Hierarchical Composites for High Performance Li‐ion Batteries

Engineering electrode nanostructures is critical in developing high‐capacity, fast rate‐response, and safe Li‐ion batteries. This study demonstrates the synthesis of orthorhombic Nb₂O₅@Nb₄C₃T_x (or @Nb₂CT_x) hierarchical composites via a one‐step oxidation —in flowing CO₂ at 850 °C —of 2D Nb₄C₃T_x (or Nb₂CT_x) MXene. The composites possess a layered architecture with orthorhombic Nb₂O₅ nanoparticles decorated uniformly on the surface of the MXene flakes and interconnected by disordered carbon. The composites have a capacity of 208 mAh g^?1 at a rate of 50 mA g^?1 (0.25 C) in 1–3 V versus Li⁺/Li, and retain 94% of the specific capacity with 100% Coulombic efficiency after 400 cycles. The good electrochemical performances could be attributed to three synergistic effects: (1) the high conductivity of the interior, unoxidized Nb₄C₃T_x layers, (2) the fast rate response and high capacity of the external Nb₂O₅ nanoparticles, and (3) the electron “bridge” effects of the disordered carbon. This oxidation method was successfully extended to Ti₃C₂T_x and Nb₂CT_x MXenes to prepare corresponding composites with similar hierarchical structures. Since this is an early report on producing this structure, there is much room to push the boundaries further and achieve better electrochemical performance.