High performance 35 nm gate length CMOS with NO oxynitride gate dielectric and Ni salicide

The 35 nm gate length CMOS devices with oxynitride gate dielectric and Ni salicide have been fabricated to study the feasibility of higher performance operation. Nitrogen concentration in gate oxynitride was optimized to reduce gate current I/sub g/ and to prevent boron penetration in the pFET. The thermal budget in the middle of the line (MOL) process was reduced enough to realize shallower junction depth in the S/D extension regions and to suppress gate poly-Si depletion. Finally, the current drives of 676 /spl mu/A//spl mu/m in nFET and 272 /spl mu/A//spl mu/m in pFET at V/sub dd/=0.85 V (at I/sub off/=100 nA//spl mu/m) were achieved and they are the best values for 35 nm gate length CMOS reported to date.     

Potential of predominant activated sludge bacteria as recipients in conjugative plasmid transfer

We investigated the possibility of conjugative plasmid transfer to the predominant bacteria in activated sludge and the factors influencing the transfer frequency in the activated sludge process. We performed conjugative transfers of a self-transmissible, broad-host-range plasmid RP4 from Escherichia coli C600 to activated sludge bacteria by broth mating. Most of the activated sludge bacteria tested could acquire plasmid RP4, although the transfer frequencies varied from 8.8 x 10(-7) to 1.3 x 10(-2) transconjugants per recipient. The transfer frequencies in several strains were similar to, or higher than, that in intraspecific transfer to E. coli HB101. Matings under various environmental conditions showed that factors relevant to physiological activity, such as temperature and nutrient conditions, seemed to affect the transfer frequency. In addition, conjugative transfer was detected even in filtered raw and treated wastewaters. Thus, the predominant activated sludge bacteria seem to have sufficient potential as recipients in conjugative plasmid transfer under the conditions likely to occur in the activated sludge process. Transfer frequency was reduced by agitation in the presence of suspended solid. This may suggest that conjugative plasmid transfer is physically inhibited in aeration tanks.     

Use of the inferior epigastric artery for coronary artery bypass grafting: preoperative digital subtraction angiography

Between September 1994 and January 1995, the inferior epigastric artery (IEA) was used as a free graft for direct coronary artery bypass grafting in 4 patients. The IEA is excised from its origin from the external iliac artery as a pedicle with an "oval cuff" of 3 mm in diameter to facilitate the direct anastomosis with the aorta. The 4-week postoperative angiographic study showed that the IEA grafts were patent in all patients. We found that the IEA varies in length, diameter, and the pattern of branching between patients and between the right and left sides in the same patient. The preoperative digital subtraction angiography was useful for evaluating the suitability of IEA.     

3D computation of hydrogen-fueled combustion around turbine blade-effect of arrangement of injector holes-

Recently,a number of environmental problems caused from fossil fuel combustion have been focused on.Inaddition,with the eventual depletion of fossil energy resources,hydrogen gas is expected to be an alternativeenergy resource in the near future.It is characterized by high energy per unit weight,high reaction rate,widerange of flammability and the low emission property.On the other hand,many researches have been underway inseveral countries to improve a propulsion system for an advanced aircraft.The system is required to have higherpower,lighter weight and lower emissions than existing ones.In such a future propulsion system,hydrogen gaswould be one of the promising fuels for realizing the requirements.Considering these backgrounds,our group hasproposed a new cycle concept for hydrogen-fueled aircraft propulsion system.In the present study,we perform 3dimensional computations of turbulent flow fields with hydrogen-fueled combustion around a turbine blade.Themain objective is to clarify the influence of arrangement of hydrogen injector holes.Changing the chordwise andspanwise spacings of the holes,the 3 dimensional nature of the flow and thermal fields is numerically studied.     

Measurement of the isotopic abundance of boron-10 by inductively coupled plasma-quadrupole mass spectrometry

This article describes the method for measuring the isotopic abundance of ¹⁰B in nuclear grade boron carbide using inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS). The results of investigation revealed that both the integration time and the dwell time have a major influence on the reproducibility of ICP-QMS measurements. As a result of optimization of the measurement conditions, reproducibility below 0.2% relative standard deviation (RSD) (0.17% RSD maximum) was achieved. In addition, the measured value of the isotopic abundance of ¹⁰B for each sample well agreed with the values measured by the TIMS. Thus, the method described in the present investigation was very effective in the analysis of isotopic abundance of ¹⁰B in B₄C or H₃BO₃. The results of this study suggest that ICP-QMS could be applied to the precise analysis of the isotopic abundance of ¹⁰B required in the field of nuclear applications.     

Performances of metal fluoride added carbon anodes with pre-electrolysis for electrolytic synthesis of NF3

Metal fluoride added carbon anodes treated by pre-electrolysis were investigated for electrolytic production of nitrogen trifluoride (NF₃) in molten NH₄F·KF·4HF at 100 °C. The conditions for pre-electrolysis were first optimized using a graphite sheet anode as a model anode. The formation of fluorine-graphite intercalation compounds (fluorine-GICs) with semi-covalent C–F bonds, (C_xF)_n, on the MgF₂ and CaF₂ added carbon anode surface was accelerated by pre-electrolysis at potentials less than 4.0 V. Critical current densities (CCD) on the MgF₂ added carbon anodes pre-electrolyzed under various conditions were determined, and the highest CCD was 290 mA cm⁻² obtained for that pre-electrolyzed at 3.5 V for 500 C cm⁻². This anode was successfully used in the electrolysis at 100 mA cm⁻² for 290 h and the maximum NF₃ current efficiency was 55%. From these results, it was concluded that the metal fluoride added carbon anode treated by pre-electrolysis has a high potential for electrolytic production of NF₃ at higher current density.     

Responsiveness of electric resistance of polymer-grafted carbon black/alumina gel composite against solvent vapor and solute in solution

The carbon black/alumina gel composites were prepared by sol-gel reaction of aluminum isopropoxide in the presence of polymer-grafted carbon black. The electric resistance of the alumina gel composite from polymer-grafted carbon black was very sensitive to vapor of good solvent for grafted polymer on carbon black: the electric resistance of the alumina gel composite suddenly decreased in solvent vapor and returned to initial resistance when it was transferred into dry air. The effect of surface area and particle size of carbon black on the responsiveness was also investigated. In addition, the electric resistance of the alumina gel composite was found to respond to water and methanol in n-hexane and diethyl ether.     

222Rn concentrations in greenhouses in Aomori Prefecture, Japan

Greenhouses are possible places with high 222Rn concentrations, since soil, the source of 222Rn, is directly exposed inside them. To examine this point, 222Rn concentrations in 28 greenhouses at five locations in Aomori Prefecture were measured for approximately 1 year with passive Rn detectors. For 1 week, measurements of 222Rn concentration and working level were also carried out with active detectors to get equilibrium factors and the ratio of 222Rn concentration in working time to non-working time in selected greenhouses. The geometric mean of annual 222Rn concentrations in greenhouses was 13 Bq m-3, and the same as that in dwellings and lower than that in indoor workplaces in the prefecture. However, variation of the 222Rn concentrations was far larger than in other environments, and ranged from the lowest level in outdoor workplaces to the highest level in indoor workplaces. Significant seasonal variation was also observed in 222Rn concentrations. The mean effective dose from 222Rn and its progenies was estimated to be 0.047 mSv year-1 for a farmer working in a greenhouse.