基于流动平衡的塑料挤出模优化设计

在构建流道三维参数化模型的基础上,将有限元数值分析和优化技术相结合,以口模出口处型材截面上各子区域平均流速相等为优化目标,以压缩段入口壁厚和平直段长度为设计变量,对挤出模优化设计进行了研究。并以实例说明了优化设计的具体过程,验证了所用方法的正确性和有效性。     

非战争军事行动装备保障若干问题研究

随着我军遂行非战争军事行动任务的增加,对装备保障的要求越来越高,非战争军事行动的研究进入了一个重要时期。我军对非战争军事行动装备保障的研究还处于起步阶段。介绍了非战争军事行动装备保障的特点、原则和要求,研究了非战争军事行动装备保障的运行机制,最后提出了关于问题的几点思考。     

Possible Energy Network with polygeneration system and CCS for China

On basis of adopting polygeneration systems for power and alternative fuels,capturing CO2 with near zero energy penalties,and storing CO2 on sites,a new kind of Energy Network can integrate energy utilization,CO2 capture,transportation and storage synthetically.Techno-economic analysis of this solution focusing on Inner Mongolia and the Yangtze River Delta districts had been carried with comparison to the chain method for energy utilization and CO2 sequestration.This solution can save 21.5% of energy,and re...     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

Preparation of micro-patterned surfaces of Si-N-O films and their influence on adhesion behavior of endothelial cells

Microgrooves were prepared on Si(100) surface by photolithography and wet etching.Subsequently,Si-N-O films were deposited on the microgrooves by unbalanced magnetron sputtering(UBMS) and micro-patterned surfaces of Si-N-O films were obtained.The size of the micropatterns was measured by surface profilometer.The chemical composition of Si-N-O films were characterized by X-ray photoelectron spectrometry(XPS) and the wettability of the micropatterned surfaces was evaluated by contact angle measurement.The beh...     

Dynamic equivalent method of interconnected power systems with consideration of motor loads

The existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors.This paper presents a dynamic equivalent method which considers motor dynamics.At first,the clustering criterion of motor loads is given.The motors with similar dynamic characteristics are classified into one group.Then,reduction of motors in the same group is carried out.Finally,parameters of the equivalent motor are calculated and the equivalent system is thus...     

Conditional probability Markov chain simulation based reliability analysis method for nonnormal variables

Based on fast Markov chain simulation for generating the samples distributed in failure region and saddlepoint approximation(SA) technique,an efficient reliability analysis method is presented to evaluate the small failure probability of non-linear limit state function(LSF) with non-normal variables.In the presented method,the failure probability of the non-linear LSF is transformed into a product of the failure probability of the introduced linear LSF and a feature ratio factor.The introduced linear LSF wh...     

基于OMRONPLC三层网络的蛋粉加工DCS系统

研究并验证了OMRON PLC的网络通信功能。对其PLC的典型应用三层网络架构,即Ether-net(信息层)、Controller Link(控制层)和DeviceNet(设备层)进行了深入研究,详细论述了OMRONPLC三层网络组成DCS的建立方法、数据传输的过程以及PLC网络编程技术的实现,并采用OMRONPLC的三层网络架构组成DCS控制系统,将这种DCS系统成功地运用到了蛋粉生产过程控制中。结果表明,通过DCS系统实现了对蛋粉生产过程的远程监控。     

纳米糊精微球对头孢曲松钠的吸附及其释药性能

以糊精为原料,三偏磷酸钠为交联剂,利用反相微乳液法制备糊精纳米微球,并对头孢曲松钠的吸附载药和释药性能进行了研究。为模拟人体血液环境,选取了pH 7.4的磷酸二氢钠-磷酸氢二钠缓冲液为介质考查了糊精微球的吸附载药及降解性能。实验表明,纳米糊精微球对头孢曲松钠的载药率为9.44%,载药能力随着投药量的增加而增加,温度对载药能力的影响不显著,在α-淀粉酶存在的条件下,降解6 h后有23.94%的纳米糊精微球被降解。     

电磁管道抗垢装置的功放及回馈电路关键技术

分析比较了超声波防垢、机械去垢、管道化学酸洗、管道高压水射流清洗和电磁防垢的方法和效果。利用电磁防垢的防垢、除垢、杀菌和灭藻的功能原理,研制了嵌入式音频电磁共振管道抗垢装置。音频功率放大器件是装置的关键部分,既保证了足够的功率输出,又具有短路保护和过热保护作用。电路设计上,根据推动负载线圈功率信号的特点,将常规的线性功率放大电路改进成比较开关电路,有效降低了功放芯片的自身损耗。装置还通过线性光耦回馈负载线圈上的信号,进行峰值检测,经过微处理器运算后输出最佳频率,优化了管道抗垢去垢功效。