Simulation of toxic gases and vapours removal by activated carbon filters

The system ASC carbon filter/cyanogen chloride was studied by simulation. Three filter configurations and several models, taking into account Langmuir adsorption and second-order reaction between the adsorbed toxic vapour and the active metal on the surface, were developed.The effects of axial dispersion, number of reaction units, film mass transfer units and intraparticle mass transfer resistance on the breakthrough time were studied.Simulation results show that a complex model should be used in order to predict with reasonable accuracy the protection imparted by these filters.     

Mass/heat-exchange network representation of distillation networks

This article introduces the “state space” conceptual framework to process synthesis, which is used to provide a novel representation of a distillation network as a composite heat- and mass-exchange network. This representation suggests that distillation network synthesis may best be viewed as an interacting heat- and mass-exchange network synthesis problem. In that regard, familiar tools (such as pinch diagrams) from both heat-exchange network (HEN) and mass-exchange network (MEN) synthesis are shown to be of use in arriving at energy-efficient distillation network designs. Examples of propylene-propane and solvent-water separations are used to illustrate the proposed conceptual framework.     

Theoretical elastoplastic buckling of stringer stiffened cylindrical shells

A linear analysis method is offered to predict the theoretical elastoplastic buckling of stringer stiffened cylindrical shells subjected to longitudinal loading. Welding residual stresses are taken into account in the calculation, but effects of geometrical imperfections and pre-buckling displacements are ignored.The examples analysed show a good correlation between the analytical results and those obtained experimentally with stocky models of moderate geometrical imperfections.     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

Familial myeloproliferative syndrome

Familial chronic myeloproliferative syndrome (CMS) was observed in five members from two different generations of the same kindred. Diagnosis included agnogenic myeloid metaplasia (case 1), polycythemia vera (case 2), and essential thrombocythemia (cases 3-5). Cases 1-3 were siblings, case 5 was the daughter of case 1, and case 4 was the cousin of cases 1, 3. Age at diagnosis ranged from 28 to 75 years, cases 1 and 3 were male, and the others were female. The diagnosis was made after an episode of cerebral thrombosis in one patient, during a study for headache and dizziness in another, and fortuitously in the three remainders. All patients had splenomegaly and varying degrees of thrombocytosis. The cytogenetic exam was normal in all four cases. A woman patient was treated with interferon during a pregnancy. Fetal growth was retarded, and the newborn showed bone and genital malformations. No environmental leukemogen factor was found. This familial case strengthens Dameshek's theory of a common pathogenesis of CMS and suggests a genetic and hereditary etiology.     

Process heat integration of a heavy crude hydrotreatment plant

The present paper focuses on the study of process alternatives for heat integration of a heavy crude oil hydrotreatment plant. Experimental information obtained from a pilot scale, kinetics and reactor modeling tools, and a commercial process simulator were employed to develop mass and energy balances. Four study cases, which employ a combination of quenching and heat exchangers, were identified and evaluated. The results indicated that the case with two quenches with hydrogen and three heat exchangers is the best process heat integration (PHI) option from an energetic point of view.     

Effect of Dilution and Porosity on Self-Propagating High-Temperature Synthesis of Silicon Nitride

Self-propagating high-temperature synthesis is a very easy and low-cost method to synthesize Si₃N₄. The nitriding of silicon powder takes place in a self-sustained regime under high pressures of nitrogen with dilution of silicon by Si₃N₄. In this work effects of dilution and green-mixture porosity on combustion velocity and phase content of reaction products are studied. Results are compared with previous work of other authors and different behaviors are found. An explanation of these behaviors is given.     

The effect of probability of coalescence on the evolution of bubble sizes in a turbulent pipeline flow: A numerical study

A population balance method in which continuum and discrete phases are integrated is developed to simulate the evolution of polydisperse population of bubbles in a turbulent pipeline flow. The investigation is focused on the effect of the coalescence efficiency on this evolution. A dilute system of bubbles under microgravity conditions is considered. It is found that if the initial coalescence efficiency is low, a slight increase produces a significant effect on the bubble coalescence rate, and thus on the evolution of the population. If, however, the initial coalescence efficiency is high, its increase results in a marginal effect on the way the population evolves. The results of simulations are validated against experimental data on the population mean.     

Karyotype description of Pomacea patula catemacensis (Caenogastropoda, Ampullariidae), with an assessment of the taxonomic status of Pomacea patula.

Mitotic chromosomes of the freshwater snail Pomacea patula catemacensis (Baker 1922) were analyzed on gill tissue of specimens from the type locality (Lake Catemaco, Mexico). The diploid number of chromosomes is 2n = 26, including nine metacentric and four submetacentric pairs; therefore, the fundamental number is FN = 52, No sex chromosomes could be identified. The same chromosome number and morphology were already reported for P. flagellata, i.e., the other species of the genus living in Mexico. The basic haploid number for family Ampullariidae was reported to be n = 14 in the literature; so, its reduction to n = 13 is probably an apomorphy of the Mexican Pomacea snails. Lanistes bolteni, from Egypt, also shows n = 13, but its karyotype is much more asymmetrical, and seems to have evolved independently from P. flagellata and P. patula catemacensis. The nominotypical subspecies, P. patula patula (Reeve 1856), is a poorly known taxon, whose original locality is unknown. A taxonomical account is presented here, and a Mexican origin postulated as the most parsimonious hypothesis.