Control of mineral wool thickness using predictive functional control

The production process of mineral wool is affected by several constantly changing factors. The ingredients for the mineral wool are melted in a furnace. The molten mineral charge exits the bottom of the furnace in a water-cooled trough and falls into a fiberization device (the centrifuge). The centrifuge forms the fibers. At this stage binders are injected to bind the fibers together. To ensure the quality of the end product (the consistent thickness) the flow of the bounded fibers must be as constant as possible. One way to ensure that is to control the speed of the conveyor belt that transports the bounded fibers from the centrifuge to the curing process. Predictive functional controller and PID controller are considered to replace an existing algorithm. Both can easily replace an existing one as they do not require any new sensor installation. All three algorithms are presented and tested on a developed plant model. The study showed that the predictive control gives better results than the existing and PID controller.     

Full theory of speckle displacement and decorrelation in the image field by wave and geometrical descriptions and its application in mechanics

Abstract

The paper describes the possibility of using the speckle pattern decorrelation for determination of small deformation tensor components of an elementary object surface area in an optical image field. The relationship between the small-deformation tensor and the speckle field displacement is analysed in detail. The studied problem is presented from the approximation viewpoint of both wave and geometrical optics.     

The pin power distribution in theVVER-1000 mock-up on the LR-0 research reactor

The pin power density distribution in reactor is an important quantity, necessary for the adequate assessment of fuel conditions and of core structures and pressure vessel radiation embrittlement as well.The paper shows the detailed comparison of calculated and experimentally determined pin by pin power distribution. To verify the reliability of measured data used for comparison with calculated data, the symmetrically located pins were measured. The calculations have been done with deterministic and Monte Carlo approach. The effect of different data libraries used for calculations are discussed as well.     

Bread and durum wheat compared for antioxidants contents,and lipoxygenase and peroxidase activities

Potential beneficial components, including proteins, total phenolics, total flavonoids, carotenoids, tocopherols, and DPPH radical scavenging activity, were investigated in wholemeal of ten bread (T. aestivum L.) and ten durum (T. durum Desf.) novel wheat genotypes. In addition, the activity rate of lipoxygenase (LOX) and peroxidase (POD) enzymes implicated in the antioxidant metabolism was determined. The protein contnet and the antioxidant properties varied according to the two different wheat species, as well as, between the different bread and durum wheat genotypes themselves. The results indicated significant differences in proteins and antioxidant compounds between bread and durum wheat. Higher total proteins, wet gluten and antioxidants contents, combined with lower LOX and POD activities, point to a higher nutritive value of durum wheat than bread wheat.     

Multiscale approach to the morphology,structure, and segmental dynamics of complex degradable aliphatic polyurethanes

A multiscale approach spanning from the segmental (subnanometer) up to micrometer level was applied for detailed study of the self‐assembly of aliphatic block polyurethane (PU) elastomers. To understand the principles of the self‐organization of hard and soft segments in the complex multi‐component systems, several two‐component model PU samples, that is, the products of 1,6‐diisocyanatohexane (HDI) with three diols differing in the length and constitution were also prepared, characterized, and investigated: (i) polycarbonate‐based macrodiol (MD), (ii) biodegradable oligomeric diol (DL‐L; product of butane‐1,4‐diol and D,L‐lactide), and (iii) butane‐1,4‐diol (BD). The study (particularly ¹³C‐¹H PILGRIM NMR spectra) reveals complex internal organization and interesting (application appealing) behavior of multi‐component PUs. Hard segments (HDI+BD products) feature self‐assembled and significantly folded chain conformations with interdomain spacing 15–22 nm (small‐angle X‐ray scattering analysis). The small domains are hierarchically assembled in various structural formations of µm size (spherulites) depending on PU composition, as detected by transmission electron microscopy and atomic force microscopy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41590.     

Deformation and Fracture of β‐Silicon Nitride Micropillars

Room‐temperature deformation and fracture behaviors under microcompression of single crystal β‐silicon nitride (Si₃N₄) micropillars were investigated. Pillars were fabricated by focused ion beam (FIB) in large Si₃N₄ grains, located close to the basal and prismatic orientations, selected by electron backscatter diffraction (EBSD). The micromechanical test and the damage characterization were performed by nanoindentation and scanning electron microscopy (SEM), respectively. The elastic, plastic, and fracture properties, such as Young's modulus, yield stress, and rupture stress are considerably influenced by the pillar orientation. The activation of the type slip system was identified in case of basal oriented micropillars.     

On the solid state heat transport phenomena measurement

The paper deals with theoretical and experimental aspects of lumped capacitance model (LCM) application for the study of heat transport in different materials. Patented construction of the measuring chamber together with special software the fundamental features of which are presented here allows evaluating thermal conductivity k, specific heat capacity c_p and thermal diffusivity α. Obtained results are in relatively very good agreement with those obtained from independent measurement or table values.     

Influence of nitriding on corrosion resistance of martensitic X17CrNi16‐2 stainless steel

Nitriding increases surface hardness and improves wear resistance of stainless steels. However, nitriding can sometimes reduce their corrosion resistance. In this paper, the influence of nitriding on the corrosion resistance of martensitic stainless steel was investigated. Plasma nitriding at 440 °C and 525 °C and salt bath nitrocarburizing were carried out on X17CrNi16‐2 stainless steel. Microhardness profiles of the obtained nitrided layers were examined. Phase composition analysis and quantitative depth profile analysis of the nitrided layers were preformed by X‐ray diffraction (XRD) and glow‐discharge optical emission spectrometry (GD‐OES), respectively. Corrosion behaviour was evaluated by immersion test in 1% HCl, salt spray test in 5% NaCl and electrochemical corrosion tests in 3.5% NaCl aqueous solution. Results show that salt bath nitrocarburizing, as well as plasma nitriding at low temperature, increased microhardness without significantly reducing corrosion resistance. Plasma nitriding at a higher temperature increased the corrosion tendency of the X17CrNi16‐2 steel.     

The Low‐Temperature Cosintering of Cobalt Ferrite and Lead Zirconate Titanate Ceramic Composites

Magneto‐electric (ME) ceramic composites of cobalt ferrite (CoF) and lead zirconate titanate (PZT) were prepared by mechanical mixing of the constituent powders followed by cosintering. The cosintering conditions for nano‐sized CoF and submicrometer‐sized PZT powders were studied in detail. It was found that the CoF powder needs to be presintered at 700°C for 2 h to minimize the differences in the sintering kinetics of the constituent powders. Despite the low cosintering temperatures (900°C–1000°C) the interdiffusion of the cations from both phases was confirmed with energy‐dispersive X‐ray analysis and X‐ray diffraction. Efforts were made to optimize the cosintering conditions to prepare dense ceramic ME composites, which showed the converse ME effect.