Vacuum-processed polyethylene as a dielectric for low operating voltage organic field effect transistors

We report on the fabrication and performance of vacuum-processed organic field effect transistors utilizing evaporated low-density polyethylene (LD-PE) as a dielectric layer. With C₆₀ as the organic semiconductor, we demonstrate low operating voltage transistors with field effect mobilities in excess of 4 cm²/Vs. Devices with pentacene showed a mobility of 0.16 cm²/Vs. Devices using tyrian Purple as semiconductor show low-voltage ambipolar operation with equal electron and hole mobilities of ～0.3 cm²/Vs. These devices demonstrate low hysteresis and operational stability over at least several months. Grazing-angle infrared spectroscopy of evaporated thin films shows that the structure of the polyethylene is similar to solution-cast films. We report also on the morphological and dielectric properties of these films. Our experiments demonstrate that polyethylene is a stable dielectric supporting both hole and electron channels.     

Efficient Decomposition Techniques for Symbolic Analysis of Large-Scale Analog Circuits by State Variable Method

New tearing techniques for the systematic formulation of the state equations in symbolic normal-form for linear and nonlinear time-invariant large-scale analog circuits are developed. Some examples are given to illustrate the decomposition procedure and the assignment of the connection sources. The partial symbolic state equations of the opamp A 741 are obtained using the tearing approach, while these equations cannot be written working on the whole circuit.     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.     

Fatty Acids,CD36, Thrombospondin-1, and CD47 in Glioblastoma: Together and/or Separately?

Glioblastoma (GBM) is one of the most aggressive tumors of the central nervous system, characterized by a wide range of inter- and intratumor heterogeneity. Accumulation of fatty acids (FA) metabolites was associated with a low survival rate in high-grade glioma patients. The diversity of brain lipids, especially polyunsaturated fatty acids (PUFAs), is greater than in all other organs and several classes of proteins, such as FA transport proteins (FATPs), and FA translocases are considered principal candidates for PUFAs transport through BBB and delivery of PUFAs to brain cells. Among these, the CD36 FA translocase promotes long-chain FA uptake as well as oxidated lipoproteins. Moreover, CD36 binds and recognizes thrombospondin-1 (TSP-1), an extracellular matrix protein that was shown to play a multifaceted role in cancer as part of the tumor microenvironment. Effects on tumor cells are mediated by TSP-1 through the interaction with CD36 as well as CD47, a member of the immunoglobulin superfamily. TSP-1/CD47 interactions have an important role in the modulation of glioma cell invasion and angiogenesis in GBM. Separately, FA, the two membrane receptors CD36, CD47, and their joint ligand TSP-1 all play a part in GBM pathogenesis. The last research has put in light their interconnection/interrelationship in order to exert a cumulative effect in the modulation of the GBM molecular network.     

Processing–formulation–performance relationships of polypropylene/short flax fiber composites

This work is a comprehensive study of the effect of extrusion process parameters and formulation on the properties of polypropylene (PP)/short flax fiber composites. The parameters that were varied during the twin‐screw extrusion process were screw configuration, revolutions per minute (rpm), extrusion temperature, and flow rate. The effect of the feeding zone location of cellulosic fiber was also considered. This study investigates the effect of the formulation, cellulosic fiber content, the presence of a coupling agent, and of a reactive additive on composite performance. The composites were characterized in terms of morphology and microstructure, fiber length, rheological, thermal, and mechanical properties. Sensibility to humidity and recyclability were also considered. When compared with as‐received PP, the tensile strength of injection‐molded parts increased with cellulosic content by up to 40 vol %, and the tensile modulus increased 3.5 times when a combination of coupling and reactive agents was used. Exposed to controlled humidity of 50% during 1 year, these composites exhibited a very low level of humidity uptake around 0.85 wt %. The processability of these materials using a cast film line and the mechanical properties of extruded sheets are also presented. Furthermore, these materials demonstrate a good recyclability using injection molding by keeping the integrality of their mechanical properties after five reprocessing cycles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41528.     

Synthesis and characterization of a titanium phosphate-tellurite glass for Faraday rotators

This work is focused on investigation of thermal, structural, optical, magnetic, and magneto-optical properties of novel titanium phosphate-tellurite glass applied as Faraday rotators. The glass belonging to the system 35Li₂O–10Al₂O₃–5TiO₂–45P₂O₅–5TeO₂ was prepared by a nonconventional wet route of raw materials processing, followed by melting-quenching-annealing steps. Some important physical properties of the investigated glass have been measured and calculated, providing knowledge related to glass compactness, electronic structure, glass forming capability, etc. XRD analysis evidenced an amorphous network structure of the investigated glass. The optical absorption in the Vis domain is mainly due to Ti³⁺ ions and Te₂ clusters formed during the glass melting process. A relatively low optical absorption is noticed over 600 nm that activates a significant Faraday magneto-optical effect. Photoluminescence bands in the blue, red, and infrared domains are observed, caused by Te₂ clusters formed during the glass melting process. The magnetization in dependency on applied magnetic field reveals a complex behavior of the glass, depending on temperature. Thus, it is found a ferromagnetic behavior up to 2000 Oe, a paramagnetic component up to 40 000 Oe, followed by a diamagnetic one over 40 000 Oe. Faraday rotation angle and Verdet constant values in the visible domain are correlated with the reduced TeO₂ content of the glass.     

Oracle M‐Estimation for Time Series Models

We propose a thresholding M‐estimator for multivariate time series. Our proposed estimator has the oracle property that its large‐sample properties are the same as of the classical M‐estimator obtained under the a priori information that the zero parameters were known. We study the consistency of the standard block bootstrap, the centred block bootstrap and the empirical likelihood block bootstrap distributions of the proposed M‐estimator. We develop automatic selection procedures for the thresholding parameter and for the block length of the bootstrap methods. We present the results of a simulation study of the proposed methods for a sparse vector autoregressive VAR(2) time series model. The analysis of two real‐world data sets illustrate applications of the methods in practice.     

Design of New Cardanol Derivative: Synthesis and Application as Potential Biobased Plasticizer for Poly(lactide)

A novel biobased plasticizer made of cardanol is designed for poly(lactide) (PLA). This cardanol‐derived plasticizer, i.e., methoxylated hydroxyethyl cardanol (MeCard), is synthesized through methoxylation of the double bonds on the side chain of cardanol, and characterized by ¹H NMR and mass spectrometry. The plasticization effect of MeCard on the molecular structure, morphology, thermal and mechanical properties of PLA is evaluated and compared to that of a commercial cardanol, i.e., hydroxyethyl cardanol (pCard). The plasticization efficiency of MeCard is demonstrated by a substantial decrease of the glass transition temperature and storage modulus together with a significant increase of the elongation at break as compared to neat PLA. Moreover, MeCard exhibits higher plasticization performance than pCard toward PLA. Such behavior is related to a higher miscibility and compatibility between PLA and MeCard thanks to the methoxylation of the double bonds on the side chain of cardanol as shown by SEM micrographs.

     

Compressive properties of pristine and SiC-Te-added MgB2 powders,green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB₂ powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB₂ show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static K_IC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB₂ blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data.