A Taxonomy of Representation Strategies in Iconic Communication

Predicting whether the intended audience will be able to recognize the meaning of an icon or pictograph is not an easy task. Many icon recognition studies have been conducted in the past. However, their findings cannot be generalized to other icons that were not included in the study, which, we argue, is their main limitation. In this paper, we propose a comprehensive taxonomy of icons that is intended to enable the generalization of the findings of recognition studies. To accomplish this, we analyzed a sample of more than eight hundred icons according to three axes: lexical category, semantic category, and representation strategy. Three basic representation strategies were identified: visual similarity; semantic association; and arbitrary convention. These representation strategies are in agreement with the strategies identified in previous taxonomies. However, a greater number of subcategories of these strategies were identified. Our results also indicate that the lexical and semantic attributes of a concept influence the choice of representation strategy.     

Hydroxyapatite crystal growth on calcium hydroxyapatite ceramics

Calcium hydroxyapatite (Ca-HAP) ceramics containing tricalcium phosphate (TCP) were soaked in three solutions: phosphate buffer, tris buffer, and simulated body fluid (SBF). Petal-like crystals of Ca-HAP were deposited on the Ca-HAP ceramics when (i) Ca-HAP ceramics contained -TCP, (ii) the soaking solution contained phosphate ion and (iii) the pH of soaking solution was higher than 7.3. These conditions facilitate the presence of HPO ₄ ^2– and Ca²⁺ ions, the latter from dissolution of -TCP. A well-defined X-ray diffraction pattern for the deposited Ca-HAP crystals indicates preferred growth of {002} planes. Slower crystal growth of Ca-HAP was found for SBF (pH=7.5) than in the phosphate buffer, due possibly to the lower phosphate ion content in SBF.     

Thermophysical properties data on molten semiconductors

Thermophysical properties of molten semiconductors are reviewed. Published data for viscosity, thermal conductivity, surface tension, and other properties are presented. Several measurement methods often used for molten semiconductors are described. Recommended values of thermophysical properties are tabulated for Si, Ge, GaAs, InP, InSb, GaSb, and other compounds. This review shows that further measurements of thermophysical properties of GaAs and InP in the molten state are required. It is also indicated that a very limited amount of data on emissivity is available. Space experiments relating to thermophysical property measurements are described briefly.Nomenclature Density - C _p Specific heat - Kinematic viscosity - Dynamic viscosity= - Thermal diffusivity - Thermal conductivity=C_p - Volumetric thermal expansion coefficient - Surface tension - d/dT Temperature coefficient of surface tension - g Gravitational acceleration - T Temperature - T Temperature difference - L Characteristic dimension     

Co-crosslinking blend of incompatible polymers VI: Poly(vinyl chloride) toughened with polyethylene via a co-crosslinking technique

A binary blend which consists of two incompatible polymers such as poly(vinyl chloride) and polyethylene has been performed through a partial co-crosslinking reaction with peroxide to give a co-crosslinked blend with a uniform dispersion of small polyethylene particles and with an improved mechanical property. The results are obtained through the formation of a co-crosslinked product which acts as a potential solid phase dispersant as well as a well-bonded reinforcing interlayer on polyethylene particles uniformly dispersed in poly(vinyl chloride) matrix. The resulting blends (PVC/PE=10/90 wt) give carbon spherules of 0.5 to 1m diameter through pressure-carbonization at 650° C for 1 h.     

Synthesis of poly(α-thiophenediyl)benzylidene with high molecular weight and its thermal stability

Summary The synthesis of poly(-thiophenediyl)benzylidene (PTB) with high molecular weight is described. Number-average degrees of polymerization reached about 74. The characterizations of the polymer was investigated by ¹H-NMR, ¹³C-NMR, IR, and UV-VIS spectra. The polymer with well-defined structure and high molecular weight was obtained by polymerization at low temperature and in polar solvent. This polymer was thermally stable and a thermal decomposition took place at 391°C under nitrogen and at 370°C under air. The glass transformation temperature was 117°C and this PTB was nonfusible.     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry     

Prostaglandin-like substances formed during autoxidation of methyl linolenate

Prostaglandin-like substances other than 3-(2-ethyl-5-hydroxy-3-oxo)-cyclopentanyl-2-propenal (compound I), which upon reacting with amino acids form reddish pigments, were purified, and their chemical structures were determined. Three red pigment-forming substances (RPS) in autoxidized methyl linolenate were purified successively by gel chromatography on Sephadex LH-20, column chromatography and thin layer chromatography on Silica Gel 60, and by high performance liquid chromatography on μ-Porasil. IR spectra of the RPS showed the absorption of an ester group (νC=O 1730 cm⁻¹ in CHCl₃) and of a longer branched chain (νC-H 2800–3100 cm⁻¹), in addition to the absorption bands observed in compound I. Electron impact mass spectra of the trimethylsilyl ethers obtained after reduction with NaBH₄ and NaBD₄ were analyzed in detail and compared with those of compound I. The structures of the RPS were identified as stereoisomeric methyl 8-[2-(2-formylvinyl)-3-hydroxy-5-oxo-cyclopentanyl]-octanoates derived from methyl 12-hydroperoxy-linolenate. Presented at the general meeting of the Japanese Society of Scientific Fisheries, held at Tohoku University, Sendai, Japan, October 1984.     

Synthesis of tetramethyl-p-silphenylenesiloxanedimethylsiloxane triblock copolymer by employing living anionic polymerization

Dimethylsiloxane-tetramethyl-p-silphenylenesiloxane-dimethylsiloxane (DMS-TMPS-DMS) triblock copolymer was synthesized by employing living anionic polymerization of hexamethylcyclotrisiloxane (D₃). Two synthetic methods were carried out for the polymerization. One of those methods was the anionic polymerization of D₃ initiated at the silanolate anion which was prepared from the terminal hydroxyl group of silanol-terminated TMPS prepolymer by reaction with n-butyllithium (method 1). The other was the coupling reaction of vinyl-terminated TMPS prepolymer with hydrosilyl-terminated DMS prepolymer obtained from the anionic polymerization of D₃ by using diphenylmethylsilanolate anion as initiator (method 2). In method 1, DMS contents of the copolymers ranged from 25.8 to 72.5 wt% and the values agreed with the ratio of D₃ to TMPS prepolymer. The weight-average molecular weights ranged from 1.36×10⁴ to 19.4×10⁴ and were close to the predicted values calculated from the $\text{M}\text{?}{}_{\mathrm{v}}$ of the TMPS prepolymer and the amount of D₃ added. In the case of method 2, weight-average molecular weights ranged from 19.5×10⁴ to 24.2×10⁴. The high molecular weight copolymer could thus be obtained by method 2. Intrinsic viscosity values of the triblock copolymers agreed with calculated values obtained by considering the copolymer as a binary mixture of these homopolymers. Differential scanning calorimetry and thermogravimetry were carried out on the triblock copolymers. The equilibrium melting temperatures of each of the copolymers were very close to that of poly-TMPS (160°C). The glass transition temperature and heat of fusion were decreased as the DMS content was increased. The thermogravimetric curves for the copolymers indicated that the thermal stability of the triblock copolymer was intermediate between the DMS and TMPS homopolymers.     

Separation of surfactant mixtures and their homologs by high performance liquid chromatography

A technique for separating similar and diverse ionogenic mixtures into their individual homologs was studied by high performance liquid chromatography on an octadecyl-silica (TSK Gel LS-410) column. Conditions used for the separation were: column size, 6 mm id×200 mm; mobile phase, water/methanol (15:85, v/v) containing (a) 1.0 M sodium perchlorate and adjsting to pH 2.5 with phosphoric acid, (b) 0.1 M and pH 3.5; column temp., 50 C. By using 2 mobile phase conditions, various surfactant mixtures were separated into their individual homologs and simultaneously distinguished from each other, regardless of their ionogenic properties.