A physics-based GaAs PHEMT noise model for low drain bias operation using characteristic potential method

A new physics-based noise model of a GaAs PHEMT is developed using the characteristic potential method (CPM). The model calculates the intrinsic noise current sources using CPM. Combined with the extrinsic noise parameters extracted from the measured S-parameters, the model reproduces four noise parameters of the device accurately under low drain bias voltages without using any fitting parameters. The model is verified with a 0.2-/spl mu/m GaAs PHEMT and shows excellent agreement with the measurements for all the noise parameters up to a drain voltage of 1 V Also, the proposed method allows the simulation of the microscopic noise distribution and thus allows one to obtain a physical understanding of noise mechanisms inside the device.     

Efficiency increase of an induction motor by improving coolingperformance

Improving the efficiency of induction motors, which are the most energy consuming electric machines in the world, saves much energy. The efficiency can be increased by improving cooling performance as well as by using better materials or by improving electromagnetic performance with better design. This paper presents the relationship between the efficiency or the losses and the temperature of coils with experiments as well as simulations by changing parameters such as the load and the flow rate of cooling air. The losses and the efficiency are calculated from an equivalent circuit method as well as experiments. Coil temperatures variation affects much on the efficiency. The internal cooling method is better than that of external cooling for the coil temperature reduction. Several cooling methods are compared focusing on the fan efficiency and performance, from which the values of the efficiencies of the motors are expected. The fan efficiency as well as the fan performance should be considered for the optimum fan design to increase the total efficiency of a motor. The simulations are validated by the comparison with the experiments     

Training sequence design and channel estimation of OFDM-CDMA broadband wireless access networks with diversity techniques

In this paper, an OFDM-CDMA system employing various diversity schemes is considered for a possible candidate of broadband wireless access networks and broadcasting applications. With an emphasis on a preamble design for multi-channel separation, we address a channel estimation based on the time-domain windowing and its imperfectness in OFDM-based multiple-antenna transmission systems. By properly designing each preamble for multiple antennas to be orthogonal in the time domain, the channel estimation can be applied to the HIPERLAN/2 and IEEE 802.11a standards in the case of more than two transmit antennas. Also, the effect of diversity techniques on the performance of OFDM-CDMA based broadband wireless access networks is investigated and the maximum achievable diversity gain for a two-path Rayleigh fading environment is evaluated. Simulation results show that the OFDM-CDMA system applying a space-time-frequency diversity with a full-rate full diversity code can give the diversity of D=4 and D=8 for both multi-user cases of maximum user and half user capacities, respectively.     

A novel high-efficiency linear transmitter using injection-locked pulsed oscillator

This letter presents a novel high-efficiency linear transmitter using pulse-width modulation (PWM). An envelope of radio frequency (RF) input signal is modulated by the PWM. The modulated signal is applied to the gate bias of a class F injection-locked power oscillator and switches it on and off. By filtering the pulsed oscillating output signal of the injection-locked oscillator using high-Q bandpass filter, the input signal is restored. This technique enables the transmitter to have high efficiency with good linearity. Also, there is little distortion near saturation point of an active device. The measured results show efficiency of 54.6% and very good linearity in PCS band at 26.4-dBm output power.     

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

High-performance, two-dimensional arrays of parallel-addressed InGaN blue micro-light-emitting diodes (LEDs) with individual element diameters of 8, 12, and 20 /spl mu/m, respectively, and overall dimensions 490 /spl times/490 /spl mu/m, have been fabricated. In order to overcome the difficulty of interconnecting multiple device elements with sufficient step-height coverage for contact metallization, a novel scheme involving the etching of sloped-sidewalls has been developed. The devices have current-voltage (I-V) characteristics approaching those of broad-area reference LEDs fabricated from the same wafer, and give comparable (3-mW) light output in the forward direction to the reference LEDs, despite much lower active area. The external efficiencies of the micro-LED arrays improve as the dimensions of the individual elements are scaled down. This is attributed to scattering at the etched sidewalls of in-plane propagating photons into the forward direction.     

Numerical analysis of the warpage problem in TSOP

The reliability and the solderability of thin small outline package (TSOP) are significantly affected by the warpage that is generated after epoxy molding compound (EMC) molding process. This warpage problem mainly results from the mismatch of material properties such as Young's modulus, Poisson's ratio and coefficient of thermal expansion (CTE) and the geometric structure of each component for TSOP. The optimization of both material properties and geometric structures using the numerical analysis is necessary to reduce the warpage of TSOP. However, there are still some limitations for the numerical analysis to obtain proper results consistent with the practical warpage values. In this paper, the numerical analysis is performed under the assumption of elastic behavior for EMC. Furthermore, to solve the limitations, the material properties at the molding temperature and the degree of reaction rate at the end of the molding process of EMC are considered together for the analysis. This numerical analysis gives the higher warpage values than the measured ones, and is applicable to the practical design of the reliable electronic package.     

e-Government information systems: Evaluation-led design for public value and client trust

e-Government systems differ from commercial information systems (IS) in that they frequently encompass strategic goals that go beyond efficiency, effectiveness and economy, and include political and social objectives such as trust in government, social inclusion, community regeneration, community well-being and sustainability. Designing e-Government systems that help to meet these objectives is a significant challenge for the future. This paper develops an evaluative design framework for e-Government projects that complements traditional approaches to IS evaluation. The framework is based upon Moor's concept of public value. It focuses upon citizens' and clients' experiences of service provision and service outcomes as contributors to the formation of public trust. Trust is shown to be related to the extent to which people feel that an e-Government service enhances their sense of being well-informed, gives them greater personal control, and provides them with a sense of influence or contingency. The framework's development and validation are founded upon analyses of a two live case studies in south-east England and London, U.K.     

Prediction of higher heating values for saturated fatty acids from their physical properties

Higher heating values (HHVs) of fatty acids (C₄–C₁₈) were measured and correlated using linear least square regression analysis. Equations were developed for the estimation of the HHVs of saturated fatty acids from their molecular weight (Mw), density (DN) and carbon number (CN). These equations are HHV = 0.0518 Mw + 29.76, HHV = −93.4 DN + 122.67 and HHV = 0.7271 CN + 31.419 with R² values of 0.9895, 0.9798, and 0.9895, respectively. The correlations may be used for HHV estimation of mixtures of fatty acids developed from vegetable oils.