Numerical solution of transport equations for plasmas with transport barriers

An approach to solve numerically transport equations for plasmas with spontaneously arising and arbitrarily located transport barriers, regions with a strongly reduced transfer of energy, is proposed. The transport equations are written in a form conserving heat flux and solved numerically by using piecewisely exact analytical solutions of linear differential equations. Compared to standard methods, this approach allows to reduce significantly the number of operations required to obtain a converged solution with a heat conductivity changing abruptly at a critical temperature gradient and to use large time steps in modeling the formation and dynamics of transport barriers. Computations for the tokamak JET are done.     

Taking into account the radiation pattern of a practical feed for a Luneberg lens

A method of taking into account the real feed radiation pattern for a Luneberg lens is proposed. According to this, the field of a feed with the given radiation pattern is expanded into series in spherical harmonics. Using this approach, it is possible to introduce the radiation patterns of real feeds into strict electrodynamic solution for a Luneberg lens, thus significantly refining a mathematical model of the antenna.     

Modelling of Al2O3 Powder Compaction with Hot Pressing in a Rigid Die

Computer modelling of hot pressing is provided. Kinetics are described for compaction during hot pressing in a rigid die, and the change in density distribution, irreversible solid phase strain accumulation, and equivalent stresses are studied by means of the finite element method. Shrinkage during the preparation of complex-shaped articles by hot pressing pure Al₂O₃ powder in a graphite die without a protective atmosphere and the physicomechanical properties of the finished article are studied. Calculated and experimental results agree satisfactorily.     

Oxidation of methane in a wide range of pressures and effect of inert gases

The analysis of methane oxidation in a wide range of pressures (0.05–10 atm) demonstrates that the efficiency of CH₃ radicals recombination is of great importance for high selectivity of C₂ hydrocarbons formation. The relative efficiency of different “colliders” assisting the stabilization of exited C₂H*₆ molecules increases in the series: solid surface> Ar> He. The increase of the overall reaction rate upon increasing pressure of the inert gases in the case of catalysts having a higher surface area and more developed pore structure is likely due to the contribution of the surface-induced chain reaction in the volume of pores.     

An efficient algorithm for maxdominance, with applications

Given a planar setS ofn points,maxdominance problems consist of computing, for everyp S, some function of the maxima of the subset ofS that is dominated byp. A number of geometric and graph-theoretic problems can be formulated as maxdominance problems, including the problem of computing a minimum independent dominating set in a permutation graph, the related problem of finding the shortest maximal increasing subsequence, the problem of enumerating restricted empty rectangles, and the related problem of computing the largest empty rectangle. We give an algorithm for optimally solving a class of maxdominance problems. A straightforward application of our algorithm yields improved time bounds for the above-mentioned problems. The techniques used in the algorithm are of independent interest, and include a linear-time tree computation that is likely to arise in other contexts.The research of this author was supported by the Office of Naval Research under Grants N00014-84-K-0502 and N00014-86-K-0689, and the National Science Foundation under Grant DCR-8451393, with matching funds from AT&T.This author's research was supported by the National Science Foundation under Grant DCR-8506361.     

Hemi- and Homozygous Loss-of-Function Mutations in DSG2 (Desmoglein-2) Cause Recessive Arrhythmogenic Cardiomyopathy with an Early Onset

About 50% of patients with arrhythmogenic cardiomyopathy (ACM) carry a pathogenic or likely pathogenic mutation in the desmosomal genes. However, there is a significant number of patients without positive familial anamnesis. Therefore, the molecular reasons for ACM in these patients are frequently unknown and a genetic contribution might be underestimated. Here, we used a next-generation sequencing (NGS) approach and in addition single nucleotide polymor-phism (SNP) arrays for the genetic analysis of two independent index patients without familial medical history. Of note, this genetic strategy revealed a homozygous splice site mutation (DSG2–c.378+1G>T) in the first patient and a nonsense mutation (DSG2–p.L772X) in combination with a large deletion in DSG2 in the second one. In conclusion, a recessive inheritance pattern is likely for both cases, which might contribute to the hidden medical history in both families. This is the first report about these novel loss-of-function mutations in DSG2 that have not been previously identi-fied. Therefore, we suggest performing deep genetic analyses using NGS in combination with SNP arrays also for ACM index patients without obvious familial medical history. In the future, this finding might has relevance for the genetic counseling of similar cases.     

Telomere Length in Metaphase Chromosomes of Human Triploid Zygotes

The human lifespan is strongly influenced by telomere length (TL) which is defined in a zygote—when two highly specialised haploid cells form a new diploid organism. Although TL is a variable parameter, it fluctuates in a limited range. We aimed to establish the determining factors of TL in chromosomes of maternal and paternal origin in human triploid zygotes. Using Q-FISH, we examined TL in the metaphase chromosomes of 28 human triploid zygotes obtained from 22 couples. The chromosomes’ parental origin was identified immunocytochemically through weak DNA methylation and strong hydroxymethylation in the sperm-derived (paternal) chromosomes versus strong DNA methylation and weak hydroxymethylation in the oocyte-derived (maternal) ones. In 24 zygotes, one maternal and two paternal chromosome sets were identified, while the four remaining zygotes contained one paternal and two maternal sets. For each zygote, we compared mean relative TLs between parental chromosomes, identifying a significant difference in favour of the paternal chromosomes, which attests to a certain “imprinting” of these regions. Mean relative TLs in paternal or maternal chromosomes did not correlate with the respective parent’s age. Similarly, no correlation was observed between the mean relative TL and sperm quality parameters: concentration, progressive motility and normal morphology. Based on the comparison of TLs in chromosomes inherited from a single individual’s gametes with those in chromosomes inherited from different individuals’ gametes, we compared intraindividual (intercellular) and interindividual variability, obtaining significance in favour of the latter and thus validating the role of heredity in determining TL in zygotes. A comparison of the interchromatid TL differences across the chromosomes from sets of different parental origin with those from PHA-stimulated lymphocytes showed an absence of a significant difference between the maternal and paternal sets but a significant excess over the lymphocytes. Therefore, interchromatid TL differences are more pronounced in zygotes than in lymphocytes. To summarise, TL in human zygotes is determined both by heredity and parental origin; the input of other factors is possible within the individual’s reaction norm.     

Dynamic mechanical and tensile properties of poly(N-vinyl pyrrolidone)-poly(ethylene glycol) blends

Mechanical properties of miscible blends of high molecular weight poly(N-vinyl pyrrolidone) (PVP) with a short-chain, liquid poly(ethylene glycol) (PEG) of molecular weight 400 g/mol have been examined as a function of PVP-PEG composition and degree of hydration. The small-strain behavior in the linear elastic region has been evaluated with the dynamic mechanical analysis and compared with the viscoelastic behavior of PVP-PEG blends under large strains in the course of uniaxial drawing to fracture and under cyclic extension. A strong decoupling between the small-strain and the large strain properties of the blends has been observed, indicative of a pronounced deviation from rubber elasticity in the behavior of the blends. This deviation, also seen on tensile tests under fast drawing, is attributed to the peculiar phase behavior of the blends and the molecular mechanism of PVP-PEG interaction. Nevertheless, for the PVP blend with 36% PEG, under comparatively low extension rates, the reversible contribution to the total work of deformation up to ε=300% has been found to be maximum at around 70%, while the blends containing 31 and 41% PEG behave rather as an elastic-plastic solid and a viscoelastic liquid, respectively.     

Optical–microphysical properties of smoke haze from Siberian forest fires in summer 2012

A comprehensive experiment on the study of dynamics of optical and microphysical characteristics of submicron aerosols in the near-ground air layer was carried out in June–August of 2012 under conditions of extremely strong smoke haze originating from vast forest fires in Siberia. Variations of the spectral angular scattering coefficients and the degree of linear polarization in the visible wavelength range are studied, as well as the mass concentrations of dry fractions of aerosol and black carbon, relative content of black carbon (BC fraction), single scattering albedo, particle size distribution function, complex refractive index of the particulate matter, and parameter of condensation activity of aerosol. Peculiarities of differences between optical and microphysical characteristics of near-ground aerosol in smoke haze and under smokeless conditions are revealed. This study is important for validation of results of remote sensing of the composition of smoke haze and background atmosphere obtained from satellite data and sun photometric measurements at the Aerosol Robotic Network (AERONET).     

Microstructure of hardened gypsum pastes

Specific surface areas and pore size distribution analysis were taken as essential parameters to explore the microstructure of hardened gypsum pastes. The hydration of gypsum plaster is essentially affected by the water/plaster ratio of the mix, and by the presence of additives which might act as retarders or accelerators to the hydration process. Affecting the microstructure would mutually lead to variations of the compressive strength of the hardened pastes, and these variations are also discussed. Results are mainly expressed in terms of the solid (measured by the extent of its specific area) to the space (pore) ratios. Dual distribution of pore sizes was observed and the two groups of pores are designed as S (small) and L (large) pores. Similarities to the microstructure of hardened Portland cement pastes are indicated. Accelerators appear to function differently from retarders, and the effects of water/plaster ratios were investigated in both cases. The results obtained may carry many significant practical implications to the future use of hardened gypsum pastes.