Identification of the Sex Pheromone of the Currant Shoot Borer Lampronia capitella

Under an artificial light:dark cycle, females of Lampronia capitella were observed calling, with extended terminal abdominal segments, during the first 2 hr of the photoperiod. Extracts of terminal abdominal segments from females elicited large electroantennographic responses from male antennae. Gas chromatography with electroantennographic detection revealed three active peaks. Based on comparison of retention times and mass spectra of synthetic standards, these compounds were identified as (Z,Z)-9,11-tetradecadienol and the corresponding acetate and aldehyde. The electroantennographic activity of the four geometric isomers of all three compounds was investigated, and the respective (Z,Z)-isomer was found to be the most active in all cases. Aldehydes generally elicited larger antennal responses than alcohols, whereas acetates were the least active compounds. A subtractive trapping assay in the field, based on a 13:26:100 micrograms mixture of (Z,Z)-9,11-tetradecadienal, (Z,Z)-9,11-tetradecadienyl acetate, and (Z,Z)-9,11-tetradecadienol confirmed that all three compounds are pheromone components. Subtraction of (Z,Z)-9,11-tetradecadienol from the blend completely eliminated its attractiveness, whereas the other two-component blends showed reduced activity. This is the first pheromone identification from the monotrysian superfamily Incurvarioidea, confirming that the common pheromones among ditrysian moths (long-chain fatty acid derivatives comprising alcohols, acetates, and aldehydes with one or more double bonds) is not an autapomorphy of Ditrysia, but a synapomorphy of the more advanced heteroneuran lineages.     

Physical gelation of crystallizing metallocene and Ziegler-Natta ethylene-hexene copolymers

The effect of molecular architecture on the evolution of viscoelastic properties during crystallization was investigated using ethylene-hexene copolymers manufactured via metallocene (M-LLDPE) and Ziegler-Natta (ZN-LLDPE) processes. Differences in branching distribution were shown to have a drastic effect on the viscoelastic properties near the gel point. It is shown that the branching distribution rather than branch content is the determining parameter for the evolution of the rheological properties during isothermal and non-isothermal crystallization, and for the width of the solidification interval. We developed a partial melting technique for the preparation of stable critical gels of LLDPE whose viscoelastic properties correspond to the intermediate state between melt and solid. Local molecular conformation and crystallinity in these gels were characterized by Raman spectroscopy, which shows that the transition from melt-like to solid-like rheological behavior (physical gelation) in LLDPE occurs at a very low overall crystallinity of less than 5%.     

Dynamic mechanical and tensile properties of poly(N-vinyl pyrrolidone)-poly(ethylene glycol) blends

Mechanical properties of miscible blends of high molecular weight poly(N-vinyl pyrrolidone) (PVP) with a short-chain, liquid poly(ethylene glycol) (PEG) of molecular weight 400 g/mol have been examined as a function of PVP-PEG composition and degree of hydration. The small-strain behavior in the linear elastic region has been evaluated with the dynamic mechanical analysis and compared with the viscoelastic behavior of PVP-PEG blends under large strains in the course of uniaxial drawing to fracture and under cyclic extension. A strong decoupling between the small-strain and the large strain properties of the blends has been observed, indicative of a pronounced deviation from rubber elasticity in the behavior of the blends. This deviation, also seen on tensile tests under fast drawing, is attributed to the peculiar phase behavior of the blends and the molecular mechanism of PVP-PEG interaction. Nevertheless, for the PVP blend with 36% PEG, under comparatively low extension rates, the reversible contribution to the total work of deformation up to ε=300% has been found to be maximum at around 70%, while the blends containing 31 and 41% PEG behave rather as an elastic-plastic solid and a viscoelastic liquid, respectively.     

Replication Protein A Enhances Kinetics of Uracil DNA Glycosylase on ssDNA and Across DNA Junctions: Explored with a DNA Repair Complex Produced with SpyCatcher/SpyTag Ligation

DNA repair proteins participate in extensive protein−protein interactions that promote the formation of DNA repair complexes. To understand how complex formation affects protein function during base excision repair, we used SpyCatcher/SpyTag ligation to produce a covalent complex between human uracil DNA glycosylase (UNG2) and replication protein A (RPA). Our covalent “RPA−Spy−UNG2” complex could identify and excise uracil bases in duplex areas next to ssDNA−dsDNA junctions slightly faster than the wild-type proteins, but this was highly dependent on DNA structure, as the turnover of the RPA−Spy−UNG2 complex slowed at DNA junctions where RPA tightly engaged long ssDNA sections. Conversely, the enzymes preferred uracil sites in ssDNA where RPA strongly enhanced uracil excision by UNG2 regardless of ssDNA length. Finally, RPA was found to promote UNG2 excision of two uracil sites positioned across a ssDNA−dsDNA junction, and dissociation of UNG2 from RPA enhanced this process. Our approach of ligating together RPA and UNG2 to reveal how complex formation affects enzyme function could be applied to examine other assemblies of DNA repair proteins.     

Application of radioactive particle tracking to indicate shed fouling in the stripper section of a fluid coker

The stripper section of a fluid‐coker consists of a system of baffles (sheds) that enhances the removal efficiency of entrained and adsorbed hydrocarbons from the fluidised coke‐particles. If the particles contain a thin liquid film layer of heavy hydrocarbons, making them excessively ‘wet’ or ‘sticky’, and if they stay in contact with sheds for too long, solid deposits are formed that lead to stripper fouling. Extensive fouling decreases stripping efficiency and liquid product yield and can shorten run‐times between shutdowns. Because of the fouling, the shape of sheds mostly changes by increasing their surfaces thickness. An early indication of that fouling and the ability to follow its development are essential for choosing optimal parameters of the process. The radioactive particle tracking (RPT) method has been tested to determine its applicability to indicate the change in the shape of internals within a fluidised bed reactor when direct observation is impossible. A single radioactive tracer‐particle has been traced in experiments lasting from 2 to 6 h. The experiments were conducted in a lab‐scale, cold‐flow fluidised bed into which a single shed with walls of different thickness was incorporated. This experimental fluidised bed provides intensive solid phase mixing that allows a single tracer‐particle to be located in any place within the reactor. By registering the frequency of the tracer‐particle appearance within a defined internal space surrounding the shed, the shape of shed was reconstructed. The conducted experiments suggest that RPT technique allows for tracking internals' fouling within a fluidised bed reactor. © 2012 Canadian Society for Chemical Engineering     

Relaxation Properties of Pressure-sensitive Adhesives upon Withdrawal of Bonding Pressure

Relaxation properties of pressure-sensitive adhesives (PSA) have been studied with the squeeze-recoil tester used in the regime of parallel-plate dilatometer under conditions imitating the removal of compressive force in the course of adhesive bond formation. The relaxation properties of PSAs are compared with their adhesive behavior measured using the 180-Deg Peel Test. Two classes of PSAs are considered: 1) conventional rubbery adhesives based on the mixtures of styrene-isoprene-styrene (SIS) block copolymer with a tackifier resin and a plasticizer, and butyl rubber plasticized with low-molecular-weight polyisobutylene, and 2) hydrophilic PSAs composed of the blends of high-molecular-weight poly(N-vinyl pyrrolidone) (PVP) with oligomeric polyethylene glycol (PEG). By comparing the adhesive and relaxation behaviors of different PSAs, the relaxation criteria for pressure-sensitive adhesion have been stated. Relaxation behavior of the examined PSAs demonstrates two values of retardation time: the shorter retardation time of 10–70?sec and the longer time of 300–660?sec. These times can be associated, respectively, with small- and large-scale mechanisms of strain recovery. By comparing the relaxation and adhesive properties of PVP-PEG blend (which involves the formation of a hydrogen-bonded network through both terminal hydroxyl groups in PEG short chains) with the properties of covalently crosslinked copolymers of vinyl pyrrolidone (VP) with PEG-diacrylate and comb-like VP copolymers with PEG-monomethacrylate, the contributions of covalent crosslinking and H-bonding network have been characterized.     

Pyridinedicarboxylic Acid Diamides as Selective Ligands for Extraction and Separation of Trivalent Lanthanides and Actinides: DFT Study

This article presents a general approach to solving the urgent practical problem of separation of 4f-(lanthanides, Ln³⁺) and 5f-elements (actinides, An³⁺) very similar in properties based on the DFT quantum-chemical supercomputer simulation of Ln³⁺ and An³⁺ complexes with polydentate nitrogen-containing heterocyclic ligands. The method allows to calculate the geometry parameters of ligands and complexes and the metal to ligand binding energies with accuracy, permitting a direct comparison of calculation results with the experimental data, and estimate selectivity factors for separation of Eu³⁺/Am³⁺ model pair cations (SF_Am/Eu) in extraction experiments on a semi-quantitative level.

The applicability of the method and the approach demonstrated by DFT-modeling (nonempirical PBE functional, extended relativistic full-electron basis set) of a large series of diamides of pyridine-2,6-dicarboxylic (dipicolinic) acid (L) with different substituents at the amide nitrogen atoms and in the pyridine cycle, as well as their complexes [LM]³⁺, (H₂O)_nM(NO₃)₃ (n = 3, 4), and LM(NO₃)₃ (M = Eu, Am).

Based on the theoretical analysis a new model is proposed that describes the mechanism of Ln³⁺ and An³⁺ extraction in two-phase system highly acidic water solution-organic solvent, according to which the formation of An³⁺ and Ln³⁺ complexes occurs at the water/organic interface as a substitution reaction of hydroxonium ion in a cavity of a protonated ligand for the metal cation.

Calculation results confirm the experimentally established higher extraction ability of dipicolinic acid diamides containing one aryl and one alkyl substituent at the amide nitrogen atoms compared to the N,N,N′,N′-tetraalkyl diamides (“effect of anomalous aryl strengthening”). Based on the simulation results the structure of the modified ligand L suggested that it should ensure maximum An³⁺/Ln³separation selectivity in the series of dipicolinic acid diamides.     

ION EXCHANGE CHARACTERISTICS OP A NEW MANGANESE OXIDE : SELF-DIFFUSION AND TRACE COMPONENT DIFFUSION

The kinetics of self-diffusion and trace component diffusion of Na+ and Cs+ in a new manganese oxide, having the chemical formula Na₄Mn₁₇O₂₇.13 H₂O, was studied. A uniform diffusion process was observed in all cases. The diffusion coefficients increase with particle size at the relatively large sizes, which is attributed to the conglomeration of small particles. The self-diffusion coefficient of Na+ is lower than that of Cs+ whereas the trace diffusion coefficients follow a reverse trend. Besides, the self-diffusion coefficients are not equal to the trace diffusion ones and opposite differences are observed for Na+ and Cs+. These results were tentatively explained in terms of the oxide water content and ion hydration.     

AICAR Protects Vascular Endothelial Cells from Oxidative Injury Induced by the Long-Term Palmitate Excess

Hyperlipidemia manifested by high blood levels of free fatty acids (FFA) and lipoprotein triglycerides is critical for the progression of type 2 diabetes (T2D) and its cardiovascular complications via vascular endothelial dysfunction. However, attempts to assess high FFA effects in endothelial culture often result in early cell apoptosis that poorly recapitulates a much slower pace of vascular deterioration in vivo and does not provide for the longer-term studies of endothelial lipotoxicity in vitro. Here, we report that palmitate (PA), a typical FFA, does not impair, by itself, endothelial barrier and insulin signaling in human umbilical vein endothelial cells (HUVEC), but increases NO release, reactive oxygen species (ROS) generation, and protein labeling by malondialdehyde (MDA) hallmarking oxidative stress and increased lipid peroxidation. This PA-induced stress eventually resulted in the loss of cell viability coincident with loss of insulin signaling. Supplementation with 5-aminoimidazole-4-carboxamide-riboside (AICAR) increased endothelial AMP-activated protein kinase (AMPK) activity, supported insulin signaling, and prevented the PA-induced increases in NO, ROS, and MDA, thus allowing to maintain HUVEC viability and barrier, and providing the means to study the long-term effects of high FFA levels in endothelial cultures. An upgraded cell-based model reproduces FFA-induced insulin resistance by demonstrating decreased NO production by vascular endothelium.     

Inhibition of Neuronal Necroptosis Mediated by RIPK1 Provides Neuroprotective Effects on Hypoxia and Ischemia In Vitro and In Vivo

Ischemic brain injury is a widespread pathological condition, the main components of which are a deficiency of oxygen and energy substrates. In recent years, a number of new forms of cell death, including necroptosis, have been described. In necroptosis, a cascade of interactions between the kinases RIPK1 and RIPK3 and the MLKL protein leads to the formation of a specialized death complex called the necrosome, which triggers MLKL-mediated destruction of the cell membrane and necroptotic cell death. Necroptosis probably plays an important role in the development of ischemia/reperfusion injury and can be considered as a potential target for finding methods to correct the disruption of neural networks in ischemic damage. In the present study, we demonstrated that blockade of RIPK1 kinase by Necrostatin-1 preserved the viability of cells in primary hippocampal cultures in an in vitro model of glucose deprivation. The effect of RIPK1 blockade on the bioelectrical and metabolic calcium activity of neuron-glial networks in vitro using calcium imaging and multi-electrode arrays was assessed for the first time. RIPK1 blockade was shown to partially preserve both calcium and bioelectric activity of neuron-glial networks under ischemic factors. However, it should be noted that RIPK1 blockade does not preserve the network parameters of the collective calcium dynamics of neuron-glial networks, despite the maintenance of network bioelectrical activity (the number of bursts and the number of spikes in the bursts). To confirm the data obtained in vitro, we studied the effect of RIPK1 blockade on the resistance of small laboratory animals to in vivo modeling of hypoxia and cerebral ischemia. The use of Necrostatin-1 increases the survival rate of C57BL mice in modeling both acute hypobaric hypoxia and ischemic brain damage.