Homogenization of liquids in tanks stirred by multiple impellers

The process of homogenization of liquids in a tall vessel equipped with a multiple impeller was studied. Up to four standard Rushton turbines and/or six pitched-blade turbines were used. The mixing time in the system was measured by the conductivity method. A continuous time history of the tracer concentration at several points in the system was recorded. The data were interpreted by means of an adapted cell model of the flow within the stirred vessel with several impellers based on the assumption of well mixed cells and intercellular flow of liquid. The liquid transfer flow rate between the cells, as a parameter of the model, was calculated from experimental data. A good agreement between the time dependence of concentration obtained experimentally and that calculated from theory was obtained. A direct relationship between the flow numbers between cells and those of impellers was established.     

Evaluation of the cochlear aqueduct patency: comparison of 2 noninvasive techniques

Variations in cephalo-rachidian fluid pressure can be transmitted to the middle ear through the cochlear aqueduct (CA). This gives us a non-invasive manner to evaluate any changes in fluid pressure by measuring middle ear impedance (impedancemetry). The present study compared two indirect methods for measuring intracranial pressure: a) impedancemetry during evoked jugulo-tympanic reflex (JTR) and b) study of the tympanic membrane (TM) fine motility using a MMS-10 analyzer. The latter is a new procedure involving the indirect evaluation of the fluid pressure. In fact, when the CA is open the labyrinthine fluid pressure is transmitted to the oval window, the stapes platina and, finally, to the tympanic membrane where it can be measured with an MMS-10 unit. This equipment can measure nanoliter shifts in the TM. In particular, comparison between the clinostatic and orthostatic tympanic motility measurements enable one to establish whether the CA is patent or not. In the present study 15 subjects were examined using both a) impedancemetry during jugular compression and b) analysis of the TM shift using an MMS-10 unit. In 14 of the 15 cases there was good correlation between the data obtained using both methods: in all but one case it proved possible to record a JTR-induced variation in impedance whenever the MMS-10 indicated that the CA was open. The results suggest that, in clinical practice, the two methods can be used in parallel for non-invasive monitoring of variations in intracranial pressure in patients with neurological involvement. On the other hand, in the E.N.T. field these techniques could be used to study inner ear pathologies causing dynamic alterations of the endolabyrinth fluids (endolymphatic hydrops, labyrinthine fistula).     

Analysis of local composition gradients in the hard-phase grains of cermets using a combination of X-ray diffraction and electron microscopy

Combination of X-ray diffraction (XRD) and scanning electron microscopy (SEM) was used for investigation of local composition gradients in the hard-phases of cermets. XRD revealed distribution of lattice parameters in hard-phase grains, from which the composition gradients in the hard-phases were estimated using an appropriate microstructure model. This microstructure model was build with the aid of SEM micrographs, which were taken with back-scattered electrons (BSE) and completed by the registration of the electron back-scatter diffraction (EBSD) patterns and characteristic X-ray spectra. SEM/BSE yielded the first information about the spatial distribution of elements in individual hard-phase grains, SEM/EBSD about the morphology, the size and the size distribution of these grains. The final interpretation of the distribution of lattice parameters, which was obtained from the X-ray line profile analysis, was done with the aid of the local elemental analysis that was performed using SEM with the energy dispersive analysis of the characteristic X-ray spectra (EDX) and the known dependence of the lattice parameters on concentration.     

Phase Transitions in Liquid Crystal Doped with Magnetic Particles of Different Shapes in Combined Electric and Magnetic Fields

We have studied the influence of electric and magnetic fields on the orientational structure of ferronematics based on a thermotropic nematic 4-trans-4 \(^{\prime }\) -n-hexylcyclohexyl-isothiocyanato-benzene (6CHBT). The 6CHBT liquid crystal has been dissolved in phenyl isothiocyanate and doped with rod-like or chain-like magnetic particles. In such a mixture, the phase transition from an isotropic to a nematic phase is via a droplet state, i.e., coexistence of nematic and isotropic phases. The obtained results showed that a combination of the electric and magnetic fields can change the character of a phase transition from the isotropic to the nematic phase via the droplet state in such systems. Moreover, magneto-dielectric measurements of structural transitions showed the magnetic field induced a shift of the phase transition temperature from the isotropic to the droplet state.     

Bimetallic dies with direct metal-deposited steel on Moldmax for high-pressure die casting application

In high-pressure die casting, cooling time greatly affects the total cycle time. As thermal conductivity is the main governing factor, a higher thermal conductive die material allows faster extraction of heat from the casting, thus resulting in shorter cycle time and higher productivity. This paper presents a novel approach to replace a conventional steel die by a bimetallic die made of Moldmax copper alloy coated with a protective layer of steel using laser cladding technology, direct metal deposition on the cavity surface for high-pressure die casting of aluminum alloys. Study includes the investigation of suitable steel layer thickness on Moldmax substrate in terms of porosity, hardness, presence of copper content, and copper particle. Results obtained from the scanning electron microscope and energy dispersive spectroscopy display a metallurgicallly sound and fully dense steel layer on copper alloy. Results of finite element heat transfer analysis also show that bimetallic die offers superior thermal performance compared with monolithic steel die.     

Quantum inductance and high frequency oscillators in graphene nanoribbons

Here we investigate high frequency AC transport through narrow graphene nanoribbons with top-gate potentials that form a localized quantum dot. We show that as a consequence of the finite dwell time of an electron inside the quantum dot (QD), the QD behaves like a classical inductor at sufficiently high frequencies ω ≥ GHz. When the geometric capacitance of the top-gate and the quantum capacitance of the nanoribbon are accounted for, the admittance of the device behaves like a classical serial RLC circuit with resonant frequencies ω ～ 100-900 GHz and Q-factors greater than 10(6). These results indicate that graphene nanoribbons can serve as all-electronic ultra-high frequency oscillators and filters, thereby extending the reach of high frequency electronics into new domains.     

Chemical-induced pH-mediated molecular switch

The transmembrane protein α-hemolysin pore has been used to develop ultrasensitive biosensors, study biomolecular folding and unfolding, investigate covalent and noncovalent bonding interactions, and probe enzyme kinetics. Here, we report that, by addition of ionic liquid tetrakis(hydroxymethyl)phosphonium chloride solution to the α-hemolysin pore, the α-hemolysin channel can be controlled open or closed by adjusting the pH of the solution. This approach can be employed to develop a novel molecular switch to regulate molecular transport and should find potential applications as a "smart" drug delivery method.     

Refined Mindlin-Reissner theory of forced vibrations of shear deformable plates

Two theories of shear deformable plate vibrations that account for the influence of the transverse normal stress component are derived. The first is a slightly modified Mindlin theory, including a shear correction factor, while in the second the use of the shear correction factor is replaced by stress components that exactly satisfy elasticity motion equations and plate face boundary conditions. A comparison with the exact 3D solution for a sinusoidally loaded rectangular plate and infinite strip is made. It is found that the refined theories significantly increase the accuracy of results compared to the original Mindlin theory.     

New model of screening kinetics

An understanding of screening requires a knowledge of screening kinetics. The new model of screening kinetics presented in this paper is theoretically described and experimentally proven. Samples of different raw materials, different in their density, bulk density, particle size distribution and particle shape, were used.The conducted experiments confirmed that the new model of screening kinetics successfully describes the process of screening of various raw materials even when they are exposed to a range of factors that most influence the screening process (dimensions of the screen, particle size distribution of raw materials, particle shape, and thickness of the bed on the screen).The advantage of this model of screening kinetics lies in its simplicity as it is characterized by the fact that it has only one parameter, i.e., (k) - the screening rate constant, which is experimentally measured. This constant can be measured on the basis of a single screening experiment. This fact is very significant for practical applications of the model to an industrial screen.     

Crosslinking of atactic polypropylene by the system peroxide-pentaerythritol tetraallyl ether

The influence of the concentration of peroxide (mainly dicumyl peroxide) and pentaerythritol tetraallyl ether as coagent and the effect of temperature on the crosslinking of atactic polypropylene (a-PP) with molar mass 12 000g/mol were investigated. Using this system, crosslinking of 40mass% of a-PP at 160°C was obtained. The problems associated with the mechanism for crosslinking of a-PP are discussed.