Surface characterization of sprayed CuGa x In1−x Se2 layers

Small-area polycrystalline CuGa _x In_1–x Se₂-based solar cells produced in the laboratory have been reported with efficiencies up to 18.8%. This success at achieving high-efficiency devices has stimulated a parallel research effort to produce large-area modules based on the use of CuGa _x In_1–x Se₂ with reduced cost of production. One method that has potential to achieve these objectives is chemical spray pyrolysis. Preliminary studies have resulted in devices with efficiencies of 4–5%. Further improvements toward implementing higher-efficiency devices are expected to result from a better understanding of the physical and chemical properties of the chalcopyrite layers produced. In this work we have investigated, for the first time, the properties of these layers using X-ray photoelectron spectroscopy (XPS) to identify the secondary phases and residual impurities present. The layers studied were for In/Ga mole ratios of x=0, 0.2, 0.4, 0.6, 0.8, and 1.0 in CuGa _x In_1–x Se₂. The layers were also profiled by sputter etching away the surface of the layers and repeating the XPS measurements. The effects of annealing the layers in air, vacuum, and selenium vapor were also investigated.     

Clinical and experimental studies of intraoperative autotransfusion using a new filtration device

The Haemocell S-350 device has recently been introduced for intraoperative autotransfusion. The system uses a novel membrane filter to process shed blood. In the first part of this study a 0.2-micron pore size filter was used in a randomized trial comparing the use of autotransfusion (n = 8) with bank blood controls (n = 9) during aortic reconstruction. This part of the trial was abandoned because of unexpected non-surgical bleeding. Bank blood requirements fell from a median of 3.0 (range 0.0-9.0) units to 1.5 (range 0.0-7.0) units when autotransfusion was used, but these patients had a greater perioperative blood loss (1791 (range 932-3104) versus 1140 (range 440-3840) ml). There was evidence of postoperative heparin excess with an activated partial thromboplastin time ratio of 1.3 (range 0.9-3.0) versus 1.0 (range 1.0-1.2) in controls and an activated clotting time of 206 (range 143-280) versus 137 (range 107-142) s. This was confirmed by raised plasma heparin levels and a prolonged thrombin time normalized by protamine. To improve performance a 0.6-micron pore size filter was studied in ten patients. Filtration efficiency doubled from 19 to 38 per cent. Electron micrographs demonstrated better filter clearance, but 44 per cent of the original concentration of heparin remained in the reinfusate. The S-350 device may be an attractive alternative to centrifugation for intraoperative autotransfusion but, until efficiency is improved, it should only be used for cardiovascular surgery when excess heparin can be reversed with protamine.     

Treatment of perianal fistulas with ND:YAG laser--results in twenty cases

Excision of perianal fistulas using a 1.064 micron wavelength neodymium:yttrium aluminum garnet (ND:YAG) contact tipped laser with primary wound closure was used to treat 20 dogs with perianal fistulas. Overall, 19 of 20 (95%) dogs had resolution of fistulas after one or more ND:YAG treatments. The period of resolution ranged from 10 to 42 months with a mean of 22.9 months. Sixteen of 20 (80%) dogs had resolved fistulas after one laser excision. Three of the four recurrences underwent additional laser treatments with successful results. The total number of laser procedures ranged from one to three with a mean of 1.2 procedures. Postoperatively, anal tone as judged by digital rectal examination was reduced in about 60% of the cases, but clinical evidence of fecal incontinence only occurred in four of 20 cases. This was managed effectively with diet modification. The tendency toward loss of anal tone or fecal incontinence depended on the severity of preexisting anal stenosis. On a client survey, 19 of 20 owners believed that their animals experienced less pain during defecation after surgery and rated the results as excellent or good. The overall success rate using ND:YAG laser excision compared very favorably with previously reported studies of other methods of treatment for perianal fistulas in dogs.     

Effect of nabumetone on hemostasis during arthroscopic knee surgery

The known effects of commonly used nonsteroidal anti-inflammatory drugs (NSAIDs) on hemostatic parameters have led to concern over their use in the perioperative period. Nabumetone, unlike other NSAIDs, has little effect on collagen-induced platelet aggregation. To evaluate the effect of nabumetone 2000 mg daily on other hemostatic parameters (e.g., bleeding time, prothrombin time, and partial thromboplastin time) in the clinical setting, this double-masked study was conducted in patients with osteoarthritis undergoing arthroscopic knee surgery. After a 1-week placebo washout period, 58 patients were randomized to receive nabumetone and 53 were randomized to receive placebo. They were assessed before surgery (after 1 to 2 weeks of treatment) and again after surgery (after an additional 3 weeks of treatment). The study was designed to have 90% power to show equivalence in bleeding time to within 1.5 minutes, a difference assumed to be of no clinical importance. No meaningful differences were observed between the groups in any of the measured hemostatic parameters. Before surgery, the bleeding time increased by only 0.3 minutes with nabumetone and decreased by 0.2 minutes with placebo. The mean (+/- SD) difference between the groups in change from baseline was 0.5 +/- 0.3 minutes. After surgery, the changes were 0.1 minutes and 0.0 minutes, respectively, and the difference between groups was 0.2 +/- 0.3 minutes. These differences were neither statistically nor clinically significant, and maximum individual increases were similar in each group. Furthermore, there were no reports of abnormal bleeding in the operative knees. The results of this study show that nabumetone had little or no effect on hemostasis and suggest that this drug can be used safely in the perioperative period.     

The genotype of the human cancer cell: implications for risk analysis

An extremely large database describes genotypes associated with the human cancer phenotype and genotypes of human populations with genetic predisposition to cancer. Aspects of this database are examined from the perspective of risk analysis, and the following conclusions and hypotheses are proposed: (1) The genotypes of human cancer cells are characterized by multiple mutated genes. Each type of cancer is characterized by a set of mutated genes, a subset from a total of more than 80 genes, that varies between tissue types and between different tumors from the same tissue. No single cancer-associated gene nor carcinogenic pathway appears suitable as an overall indicator whose induction serves as a quantitative marker for risk analysis. (2) Genetic defects that predispose human populations to cancer are numerous and diverse, and provide a model for associating cancer rates with induced genetic changes. As these syndromes contribute significantly to the overall cancer rate, risk analysis should include an estimation of the effect of putative carcinogens on individuals with genetic predisposition. (3) Gene activation and inactivation events are observed in the cancer genotype at different frequencies, and the potency of carcinogens to induce these events varies significantly. There is a paradox between the observed frequency for induction of single mutational events in test systems and the frequency of multiple events in a single cancer cell, suggesting events are not independent. Quantitative prediction of cancer risk will depend on identifying rate-limiting events in carcinogenesis. Hyperproliferation and hypermutation may be such events. (4) Four sets of data suggest that hypermutation may be an important carcinogenic process. Current mechanisms of risk analysis do not properly evaluate the potency of putative carcinogens to induce the hypermutable state or to increase mutation in hypermutable cells. (5) High-dose exposure to carcinogens in model systems changes patterns of gene expression and may induce protective effects through delay in cell progression and other processes that affect mutagenesis and toxicity. Paradigms in risk analysis that require extrapolation over wide ranges of exposure levels may be flawed mechanistically and may underestimate carcinogenic effects of test agents at environmental levels. Characteristics of the human cancer genotype suggest that approaches to risk analysis must be broadened to consider the multiplicity of carcinogenic pathways and the relative roles of hyperproliferation and hypermutation. Further, estimation of risk to general human populations must consider effects on hypersusceptible individuals. The extrapolation of effects over wide exposure levels is an imprecise process.     

Autoxidation of ubiquinol-6 is independent of superoxide dismutase

Ubiquinone (Q) is an essential, lipid soluble, redox component of the mitochondrial respiratory chain. Much evidence suggests that ubiquinol (QH2) functions as an effective antioxidant in a number of membrane and biological systems by preventing peroxidative damage to lipids. It has been proposed that superoxide dismutase (SOD) may protect QH2 form autoxidation by acting either directly as a superoxide-semiquinone oxidoreductase or indirectly by scavenging superoxide. In this study, such an interaction between QH2 and SOD was tested by monitoring the fluorescence of cis-parinaric acid (cPN) incorporated phosphatidylcholine (PC) liposomes. Q6H2 was found to prevent both fluorescence decay and generation of lipid peroxides (LOOH) when peroxidation was initiated by the lipid-soluble azo initiator DAMP, dimethyl 2,2'-azobis (2-methylpropionate), while Q6 or SOD alone had no inhibitory effect. Addition of either SOD or catalase to Q6H2-containing liposomes had little effect on the rate of peroxidation even when incubated in 100% O2. Hence, the autoxidation of QH2 is a competing reaction that reduces the effectiveness of QH2 as an antioxidant and was not slowed by either SOD or catalase. The in vivo interaction of SOD and QH2 was also tested by employing yeast mutant strains harboring deletions in either CuZnSOD and/or MnSOD. The sod mutant yeast strains contained the same percent Q6H2 per cell as wild-type cells. These results indicate that the autoxidation of QH2 is independent of SOD.     

Bioavailability of phenytoin acid and phenytoin sodium with enteral feedings

In the absence of E1B, the 289-amino acid product of human adenovirus type 5 13S E1A induces p53-independent apoptosis by a mechanism that requires viral E4 gene products (Marcellus, R.C., J.C. Teodoro, T. Wu, D.E. Brough, G. Ketner, G.C. Shore, and P.E. Branton. 1996. J. Virol. 70:6207-6215) and involves a mechanism that includes activation of caspases (Boulakia, C.A., G. Chen, F.W. Ng, J. G. Teodoro, P.E. Branton, D.W. Nicholson, G.G. Poirier, and G.C. Shore. 1996. Oncogene. 12:529-535). Here, we show that one of the E4 products, E4orf4, is highly toxic upon expression in rodent cells regardless of the p53 status, and that this cytotoxicity is significantly overcome by coexpression with either Bcl-2 or Bcl-XL. Conditional expression of E4orf4 induces a cell death process that is characterized by apoptotic hallmark features, such as externalization of phosphatidylserine, loss of mitochondrial membrane potential, cytoplasmic vacuolation, condensation of chromatin, and internucleosomal DNA degradation. However, the wide-spectrum inhibitor of caspases, tetrapeptide zVAD-fmk, does not affect any of these apoptogenic manifestations, and does not alter the kinetics of E4orf4-induced cell death. Moreover, E4orf4 expression does not result in activation of the downstream effector caspase common to most apoptosis-inducing events, caspase-3 (CPP32). We conclude, therefore, that in the absence of E1A, E4orf4 is sufficient by itself to trigger a p53-independent apoptosis pathway that may operate independently of the known zVAD-inhibitable caspases, and that may involve an as yet uncharacterized mechanism.     

MEASUREMENT OF THE SPECIFIC SURFACE AREA OF POWDERS BY THIN LAYER WICKING

The specific surface areas (A) of different clay mineral powders were measured by both the BET method and by thin layer wicking. The values of A for the BET and the wicking experiments coincided within a few percent. Thus, the simple and inexpensive thin layer wicking approach may well suffice to obtain reliable specific surface area values for most powders. From the wicking data it is also possible to obtain a rough estimate of the average particle size.