Fabrication and modification of polyvinylchloride based heterogeneous cation exchange membranes by simultaneously using Fe-Ni oxide nanoparticles and Ag nanolayer: Physico-chemical and antibacterial characteristics

Polyvinylchloride-blend-styrene butadiene rubber based nanocomposite cation exchange membranes were prepared by solution casting technique. Iron-oxide nanoparticles and Ag-nanolayer were simultaneously utilized as filler and surface modifier in membrane fabrication. The effects of Ag-nanolayer film thickness on membrane physicochemical and antibacterial characteristics of nanocomposite PVC-blend-SBR/Iron-oxide nanoparticles were studied. SEM images showed membrane roughness decreasing by Ag nanolayer thickness increasing. Membrane charge density and selectivity declined by Ag nanolayer coating up to 5 nm in membranes and then showed increasing trend by more nanolayer thickness. Ionic flux also showed increasing trend. Membranes showed good ability in E-Coli removal. 20 nm Ag-nanolayer coated membrane showed better performance compared to others.     

Processing of highly porous TiO2 bone scaffolds with improved compressive strength

In the present study, the effect of sintering time and recoating procedures on the pore architectural parameters and compressive strength of highly porous ceramic TiO₂ foams were investigated. Long sintering times (>5 h) at 1500 °C led to an inward collapse of one wall of the triangular voids typically found in the strut interior of foams prepared using the replication method. This strut folding led to increased compressive strength, while the pore architectural features were not significantly affected. Furthermore, majority of the internal porosity of the foam struts was partially eliminated and became accessible for infiltration with TiO₂ slurry. Recoating procedures were found to markedly reduce the flaw size and number in the TiO₂ foam struts, which led to significant strengthening of the ceramic structure (0.7 → 3.4 MPa) by improved structural uniformity and slightly increased strut diameter.     

Synthesis of an Enantiocomplementary Catalyst of β‐Isocupreidine (β‐ICD) from Quinine

Compound 20 , a pseudoenantiomer of β‐isocupreidine (β‐ICD), was synthesized from quinine employing a Barton reaction of nitrosyl ester 13 and acid‐catalyzed cyclization of carbinol 18 as key steps. The Baylis–Hillman reaction of benzaldehyde, p‐nitrobenzaldehyde, and hydrocinnamaldehyde with 1,1,1,3,3,3‐hexafluoroisopropyl acrylate (HFIPA) using 20 as a chiral amine catalyst was found to give the corresponding S‐enriched adducts in high optical purity (>91% ee) in contrast to the β‐ICD‐catalyzed reaction which affords R‐enriched adducts. This result suggests that compound 20 can serve as an enantiocomplementary catalyst of β‐ICD in the asymmetric Baylis–Hillman reaction of aldehydes with HFIPA.     

Integrative Analysis of Metabolomic,Proteomic and Genomic Data to Reveal Functional Pathways and Candidate Genes for Drip Loss in Pigs

The aim of this study was to integrate multi omics data to characterize underlying functional pathways and candidate genes for drip loss in pigs. The consideration of different omics levels allows elucidating the black box of phenotype expression. Metabolite and protein profiling was applied in Musculus longissimus dorsi samples of 97 Duroc × Pietrain pigs. In total, 126 and 35 annotated metabolites and proteins were quantified, respectively. In addition, all animals were genotyped with the porcine 60 k Illumina beadchip. An enrichment analysis resulted in 10 pathways, amongst others, sphingolipid metabolism and glycolysis/gluconeogenesis, with significant influence on drip loss. Drip loss and 22 metabolic components were analyzed as intermediate phenotypes within a genome-wide association study (GWAS). We detected significantly associated genetic markers and candidate genes for drip loss and for most of the metabolic components. On chromosome 18, a region with promising candidate genes was identified based on SNPs associated with drip loss, the protein “phosphoglycerate mutase 2” and the metabolite glycine. We hypothesize that association studies based on intermediate phenotypes are able to provide comprehensive insights in the genetic variation of genes directly involved in the metabolism of performance traits. In this way, the analyses contribute to identify reliable candidate genes.     

Adsorption of antifouling booster biocides on metal oxide nanoparticles: Effect of different metal oxides and solvents

Controlling the release rate of biocides (antifouling agents) from a paint coating is a key issue for the development of multi-season antifouling marine coatings. One promising approach is the use of nanoparticles onto which biocides are adsorbed to prevent premature depletion of the biocide. Adsorption of one novel (Medetomidine) and six commercially available and widely used antifouling biocides (Chlorothalonile, Dichlofluanid, Diuron, Irgarol, Seanine, Tolylfluanid) onto oxide nanoparticles (Al₂O₃, CuO, MgO, SiO₂, TiO₂, ZnO) was investigated by HPLC and NMR in different organic solvents. Large differences in adsorption strength depending on the type of nanoparticle and solvent employed were observed. It was shown that nanoparticles coordinate preferentially with the imidazole moiety of Medetomidine. Independent of the type of particle this interaction was considerably stronger in comparison to the other biocides. However, the interaction strength was strongly dependant on the type of solvent, where the largest strongest interaction was achieved in o-xylene. In addition field tests were performed where a considerable decrease in release rate was displayed from coatings containing Medetomidine adsorbed to nanoparticles compared to coatings containing Medetomidine as single additive.     

Spectroscopic analysis of poly(bisphenol A carbonate) using high resolution C and H NMR

Quantitative structural and end-group analysis of poly(bisphenol A carbonate) (BPA-PC) was carried out and number average molecular weights (M_n) were determined using 125.76 MHz ¹³C and 500.13 MHz ¹H nuclear magnetic resonance (NMR) spectroscopy. BPA-PC with a wide range of end-group ratios (0.26-2.83) and number average molecular weights (1500-9000 g/mol) was synthesized using melt transesterification by changing the initial monomer (bisphenol A and diphenyl carbonate) ratios and reaction conditions. Results of the NMR analysis for the melt-polymerized samples were compared with those of a commercial BPA-PC with a M_n of 16,000 g/mol. It was demonstrated that NMR spectroscopy is a very selective and accurate method not only for quantification of both phenolic and phenyl chain end-groups but also in the structural analysis of main chain groups. Extremely small concentrations of end-groups (∼0.02 per repeating unit) were analyzed. In addition, NMR spectroscopy was found to be an excellent tool for detecting residual monomer and the presence of the reaction byproduct (phenol). The molecular weights that were determined using NMR end-group quantification agreed well with the molecular weights measured by gel-permeation chromatography (GPC).     

Myopathy-Sensitive G-Actin Segment 227-235 Is Involved in Salt-Induced Stabilization of Contacts within the Actin Filament

Formation of stable actin filaments, critically important for actin functions, is determined by the ionic strength of the solution. However, not much is known about the elements of the actin fold involved in ionic-strength-dependent filament stabilization. In this work, F-actin was destabilized by Cu²⁺ binding to Cys374, and the effects of solvent conditions on the dynamic properties of F-actin were correlated with the involvement of Segment 227-235 in filament stabilization. The results of our work show that the presence of Mg²⁺ at the high-affinity cation binding site of Cu-modified actin polymerized with MgCl₂ strongly enhances the rate of filament subunit exchange and promotes the filament instability. In the presence of 0.1 M KCl, the filament subunit exchange was 2–3-fold lower than that in the MgCl₂-polymerized F-actin. This effect correlates with the reduced accessibility of the D-loop and Segment 227-235 on opposite filament strands, consistent with an ionic-strength-dependent conformational change that modulates involvement of Segment 227-235 in stabilization of the intermonomer interface. KCl may restrict the mobility of the α-helix encompassing part of Segment 227-235 and/or be bound to Asp236 at the boundary of Segment 227-235. These results provide experimental evidence for the involvement of Segment 227-235 in salt-induced stabilization of contacts within the actin filament and suggest that they can be weakened by mutations characteristic of actin-associated myopathies.     

Insights into the simultaneous chronopotentiometric stripping measurement of indium(III), thallium(I) and zinc(II) in acidic medium at the in situ prepared antimony film carbon paste electrode

The simultaneous measurement of microgram per liter concentration levels of indium(III), thallium(I) and zinc(II) at the antimony film carbon paste electrode (SbF-CPE) is demonstrated. The antimony film was deposited in situ on a carbon paste substrate electrode and employed in chronopotentiometric stripping mode in deoxygenated solutions of 0.01 M hydrochloric acid (pH 2). The chronopotentiometric stripping performance of the SbF-CPE was studied and compared with constant current chronopotentiometric stripping and anodic stripping voltammetric operation. In comparison with its bismuth and mercury counterparts, the SbF-CPE exhibited advantageous electroanalytical performance; namely, at the bismuth film electrode, the measurement of zinc(II) was practically impossible due to hydrogen evolution, whereas the mercury film electrode exhibited a poorly developed signal for thallium(I). The SbF-CPE revealed favorable calculated LoDs (3σ) of 1.4 μg L⁻¹ for thallium(I) and 2.4 μg L⁻¹ for indium(III) along with good linear response in the examined concentration range from 10 to 100 μg L⁻¹ with correlations coefficients (R²) of 0.992 for thallium(I) and 0.994 for indium(III) associated with a 120 s deposition time. The chronopotentiometric stripping performance of the SbF-CPE was characterized also by satisfactory reproducibility of 1.62% for indium(III), 3.96% for thallium(I) and 2.11% for zinc(II) (c = 40 μg L⁻¹, n = 11).     

Eco-friendly Geopolymer Composite Based on Non-heat-treated Phosphate Sludge Reinforced With Polypropylene Fibers

Silicon - Geopolymers produced with metakaolin (MK) and thermally untreated phosphate sludge (PS) are beneficial and environmentally advantageous materials, but their fragility limits its...