Efficient algorithms for selection of recovery points in tree taskmodels

Efficient solutions to the problem of optimally selecting recovery points are developed. The solutions are intended for models of computation in which task precedence has a tree structure and a task may fail due to the presence of faults. An algorithm to minimize the expected computation time of the task system under a uniprocessor environment has been developed for the binary tree model. The algorithm has time complexity of O(N₂), where N is the number of tasks, while previously reported procedures have exponential time requirements. The results are generalized for an arbitrary tree model     

High-breakdown-voltage AlInAs/GaInAs junction-modulated HEMT's(JHEMT's) with regrown ohmic contacts by MOCVD

A technology for increasing both the two-terminal gate-drain breakdown and subsequently the three-terminal-off-state breakdown of AlInAs/GaInAs high-electron-mobility transistors (HEMTs) to record values without substantial impact on other parameters is presented. The breakdown in these structures is dependent on the multiplication of electrons injected from the source (channel current) and the gate (gate leakage) into the channel. In addition, holes are generated by high fields at the drain and are injected back into the gate and source electrodes. These phenomena can be suppressed by increasing the gate barrier height and alleviating the fields at the drain. Both have been achieved by incorporating a p⁺-2DEG junction as the gate that modulates the 2DEG gas and by utilizing selective regrowth of the source and drain regions by MOCVD. The 1-μm-gate-length devices fabricated have two-terminal gate-drain and three-terminal-off-state breakdown voltages of 31 V and 28 V, respectively     

Loss of precious metal from Pt-Rh alloy under refractory oxide environments

Loss of precious metals from a Pt-10 wt% Rh alloy was studied at 1300° C in refractory oxides and fused quartz environments. After 60 and 150 h annealings, samples exposed to gaseous environments showed significant weight loss. The surface was attacked and characterized by micron-sized pits, as well as river-like striations. The pits were found to be enriched with silicon and/or aluminium depending upon the heating environment. Laser Raman microprobe identified that the major compound formed in the pits is -cristobalite.Direct solid state contact of Pt-Rh with Al₂O₃ and SiO₂ showed interactions between materials. The interaction was more extensive between Pt-Rh with SiO₂ than with Al₂O₃. On the other hand, no evidence of interaction except pitting and striation was observed on Pt-Rh when exposed to a vapour environment.The presence of pits and striation patterns indicated that refractory oxides attacked Pt-Rh under atmospheric conditions, and gave rise to the weight loss. Calculation of weight loss by an oxidation mechanism shows one to two orders of magnitude lower value than the actual weight loss. A new loss mechanism is proposed and discussed in this article.     

2,2′-oxo-1,1′-azobenzene: microbial transformation of rye (Secale cereale L.) allelochemical in field soils byAcinetobacter calcoaceticus: III

Acinetobacter calcoaceticus, a gram-negative bacterium isolated from field soil, was found to be responsible for the biotransformation of 2(3H)-benzoxazolinone (BOA) to 2,2-oxo-1,1-azobenzene (AZOB). Experiments were conducted to evaluate the transformation of BOA to AZOB by this microbe in sterile and nonsterile soil. Transformation studies with soils inoculated withA. calcoaceticus indicated that the production of AZOB increased linearly with the concentration of BOA in sterile soil and showed a quadratic trend in nonsterile soils. This also indicated that all soil types studied for the transformation experiments might containA. calcoaceticus capable of the conversion of benzoxazolinones.     

Living carbocationic polymerization

Summary The living synthesis of ,-di-tert.-chloropolyisobutylene ( ^t -Cl-telechelic PIB) has been accomplished by the use of the sterically hindered bifunctional initiator 1,3-di-(2-methoxy-2-propyl)-5-tert.-butylbenzene (tBu-m-DiCuOMe) in conjunction with BC1₃ coinitiator in CH₃Cl or CH₂Cl₂ diluents at –30°C and –10°C. The living nature of the polymerizations was demonstrated by linear ¯M_n versus W_PIB (g of PIB formed) plots starting at the origin and horizontal N (number of PIB moles) versus W_PIB plots. The molecular weight distributions are narrow (¯M_W/¯M_n < 2.0) and tend to decrease with increasing molecular weights. Number average end functionalities have been quantitated and found to be ¯F_n = 2.0±0.1.     

Grafting vinyl monomers into nylon-6. II. Graft copolymerization of methyl methacrylate onto nylon-6 by hexavalent chromium ion

The feasibility of chromium(VI) to induce graft copolymerization of methyl methacrylate onto nylon-6 was investigated in the presence of nitrogen. The rate of grafting was determined by varying monomer concentration, chromium(VI) concentration, temperature, acidity of the medium, solvents, inorganic salts, and redox system. The graft yield increases significantly by increasing the monomer concentration. The graft yield increases with increase of [Cr(VI)] up to 0.025 mole/liter. With further increase of [Cr(VI)], the graft yield decreases. The increase of acid concentration up to 0.395 mole/liter results the increase in graft yield. Beyond this concentration the graft yield decreases. The graft yield increases with increase in temperature up to 55°C and thereafter it decreases. The graft yield is medium dependent. The graft yield increases with increasing thiourea concentration upto 0.0025 mole/liter but beyond this concentration, the percentage graft yield decreases. A suitable kinetic scheme has been proposed and the rate equation has been evaluated.     

Production of agrochemical from waste polyesters

In this study, agrochemical was produced from waste polyesters. Reactions of waste polyesters [poly (ethylene terephthalate) (PET) and poly (butylene terephthalate) (PBT)] powder with ethylene glycol (EG) in the presence of tetrahydrofurane (THF) using 0.003 mol lead acetate as a catalyst were carried out in a batch reactor at 470 K and at atmospheric pressure conditions. Reactions were undertaken with various particle size ranges from 50 to 512.5 μm, and reaction time from 30 to 70 min for reactions of polyesters. Low molecular weight product of polyester was obtained during this process. In the next stage, hydroxylamine hydrochloride (HAHC), cyclohexylamine (CHA), and potasium hydroxide (KOH) solution were introduced to convert low molecular weight product of polyester into terephthalohydroxamic acid (TPHA) by introduction of HCl (Hydrochloric Acid) as per stoichiometric requirement. TPHA can be used as an agrochemical (insecticide) with appreciable efficiency. To increase the polyester conversion rate, external catalyst (0.003 mol lead acetate) was introduced during the reaction. The product was deposited on the surface of unreacted polyester, which was removed from the surface by introducing dimethyl sulfoxide (DMSO). To accelerate the reaction rate, DMSO, CHA, and THF were introduced during the reaction, which has an industrial significance. Depolymerization of polyester was proportional to the reaction time. Depolymerization of polyester was inversely proportional to the particle size of polyester. Analyses of value‐added product (TPHA) and byproducts [EG and BD (1,4‐butanediol)] as well as polyesters were undertaken. A kinetic model is developed, and experimental data simulated with it, which was consistent with the model. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2504–2510, 2006     

Design of a password-based authenticated key exchange protocol for SIP

The Session Initiation Protocol (SIP) is a signaling communications protocol, which has been chosen for controlling multimedia communication in 3G mobile networks. In recent years, password-based authenticated key exchange protocols are designed to provide strong authentication for SIP. In this paper, we address this problem in two-party setting where the user and server try to authenticate each other, and establish a session key using a shared password. We aim to propose a secure and anonymous authenticated key exchange protocol, which can achieve security and privacy goal without increasing computation and communication overhead. Through the analysis, we show that the proposed protocol is secure, and has computational and computational overheads comparable to related authentication protocols for SIP using elliptic curve cryptography. The proposed protocol is also provably secure in the random oracle model.     

Bipartite coherent-state quantum key distribution with strong reference pulse

We propose an optical scheme for quantum key distribution in which bits are encoded in relative phases of four bipartite weak coherent states ${|\alpha, \alpha\rangle, |-\alpha, -\alpha\rangle, |-\alpha, \alpha\rangle}$ and ${|\alpha, -\alpha \rangle}$ , with respect to a strong reference pulse. We discuss security of the scheme against eavesdropping strategies like, photon number splitting, photon beam splitting and intercept-resend attacks. It is found that present scheme is more sensitive against these eavesdropping strategies than the two-dimensional non-orthogonal state based protocol and BB84 protocol. Our scheme is very simple, requires only passive optical elements like beam splitters, phase shifters and photon detectors, hence is at the reach of presently available technology.     

Highly Efficient Quasi 2D Blue Perovskite Electroluminescence Leveraging a Dual Ligand Composition

Perovskite light-emitting diodes (PeLEDs) are advancing because of their superior external quantum efficiencies (EQEs) and color purity. Still, additional work is needed for blue PeLEDs to achieve the same benchmarks as the other visible colors. This study demonstrates an extremely efficient blue PeLED with a 488 nm peak emission, a maximum luminance of 8600 cd m⁻², and a maximum EQE of 12.2% by incorporating the double-sided ethane-1,2-diammonium bromide (EDBr₂) ligand salt along with the long-chain ligand methylphenylammonium chloride (MeCl). The EDBr₂ successfully improves the interaction between 2D perovskite layers by reducing the weak van der Waals interaction and creating a Dion–Jacobson (DJ) structure. Whereas the pristine sample (without EDBr₂) is inhibited by small stacking number (n) 2D phases with nonradiative recombination regions that diminish the PeLED performance, adding EDBr₂ successfully enables better energy transfer from small n phases to larger n phases. As evidenced by photoluminescence (PL), scanning electron microscopy (SEM), and atomic force microscopy (AFM) characterization, EDBr₂ improves the morphology by reduction of pinholes and passivation of defects, subsequently improving the efficiencies and operational lifetimes of quasi-2D blue PeLEDs.