高性能纤维的弯曲疲劳断裂研究

在自制弯曲疲劳装置上 ,对 3种高强对位芳纶及超高相对分子质量聚乙烯纤维 (Dyneema SK65 )进行双面弯曲疲劳试验。结果表明 ,Twaron 2 0 0 0弯曲疲劳寿命的自然对数与预加应力、弯曲角度呈线性关系 ,Dyneema SK65弯曲疲劳寿命明显长于对位芳纶 ,Twaron 2 0 0 0 ,Kevlar 12 9相近 ,都比Kevlar 2 9略长 ;高强型对位芳纶的弯曲疲劳断裂断口芯层呈现出“毛笔头”或“拔丝形”原纤化分裂形态 ,超高相对分子质量聚乙烯纤维弯曲疲劳断裂断口有明显的脆性折断形态 ,无原纤出现。     

纳米技术在涂料中的产业化应用

介绍了国内外纳米涂料的现状及其产业化进展。     

凉型风味料介绍

本文分析了主要凉味剂的立体构型 ,简单介绍了以L -薄荷脑 (又称L -薄荷醇 )和L -薄荷脑为基本骨架的酯类、醚类和缩酮类化合物的结构和味觉特征 ,它们的安全性以及在食品、口腔卫生用品、化妆品和肤用药中的应用。     

Orthogonal and fine lithographic structures attained from the next generation proton beam writing facility

A second generation proton beam writing (PBW) system has been built at the Centre for Ion Beam Applications at the National University of Singapore for fabrication of high aspect ratio 3D nano lithographic structures. System improvements and a few lithographic structures obtained with this facility are presented in this paper. Through accurate alignment of the magnetic quadrupole lenses and the electrostatic scanning system, orthogonal beam scanning has been achieved. The earlier constrain of limited beam scan area has been overcome by adopting a combination of beam and stage scanning as well as stitching. With these improvements smallest ever Ni structure of 65 nm in width has been fabricated using nickel electroplating on a proton beam written PMMA sample in the second generation PBW facility. Using this improved PBW facility, we have also demonstrated the fabrication of fine lithographic patterns with 19 nm line width and 60 nm spacing in 100 nm thick negative high resolution hydrogen silsesquioxane resist. Future possible system improvements leading to finer resolution will be discussed briefly.     

Evaluation of some of the properties of plasma treated wool fabric

Low temperature plasma (LTP) treatment was applied to wool fabric with the use of a nonpolymerizing gas, namely oxygen. Properties of the LTP‐treated samples including low stress mechanical behavior, air permeability, and thermal characteristics were evaluated in this study. Kawabata evaluation system fabric (KES‐F) was employed to determine the tensile, shearing, bending, and compression strength properties and surface roughness of the specimens. The changes in these properties are believed to be closely related to the interfiber and interyarn frictional force induced by the LTP. The decrease in the air permeability of the LTP‐treated wool fabric was found to be probably because of the plasma action effect on increasing the fabric thickness and a change in fabric surface morphology, which was confirmed by scanning electron microscopy micrographs. The change in the thermal properties of the LTP‐treated wool fabric was in good agreement with the earlier findings and can be attributed to the amount of air trapped between the yarns and fibers. This study suggested that the LTP treatment can influence the final properties of the wool fabric, and also provide information for developing LTP‐treated wool fabric for industrial use. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5958–5964, 2006     

两套过滤器反冲洗程序并行解决方案

该反冲洗系统是以艾默生DeltaV为控制系统,采用SFC（Sequential FunctionChart）顺序控制功能进行组态设计。介绍了＇过滤器反冲洗顺控流程,包含反冲洗联锁、反冲洗间隔时间、反冲洗时间、反冲洗跳过等,能提供两套过滤器反冲洗程序并行解决方案。     

Effect of Co2+, Ni2+, Cu2+, or Zn2+ on properties of polyaniline nanoparticles

Uniform polyaniline (PANI) nanoparticles with typical sizes of about 50 nm were electropolymerized on indium tin oxide surfaces in the presence of Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺. According to shaping theory, we first suggest the reason forming PANI spherical particles. Their conductivity, UV‐vis spectra, FTIR spectra, X‐ray diffraction, and thermogravimetric analysis were investigated. The conductivities and crystallinity of PANI doped with these ions are higher than those of PANI doped with HCl (PANI/HCl). Both UV‐vis absorption spectra and FTIR spectra indicate the interactions between Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺ and PANI chains. TG analysis also shows that the thermal stability of PANI doped by Co²⁺, Ni²⁺, Cu²⁺, or Zn²⁺ is lower than that of PANI/HCl. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Enhancing textile ink-jet printing with chitosan

Following on from previous research, the possibility of using chitosan in preparing the pretreatment print paste for textile ink-jet printing was investigated but the final colour was not as good as expected. In this study, chitosan was applied separately on cotton fabric for ink-jet printing. A two-bath method was proposed and it was confirmed that a better colour yield was achieved with this method. However, the use of chitosan reduced the tensile strength of the ink-jet printed fabric slightly.     

电厂电气运行中常见故障分析及其应对措施探讨

为了保证电厂的生产效率,必须要分析电气的运行特征,确定电气故障发生的原因,综合考虑多方面因素,选择切实可行的措施解决问题。简要分析了电厂电气运行常见故障发生原因,并提出了相应的解决措施。     

Spinning and drawing properties of ultrahigh‐molecular‐weight polyethylene fibers prepared at varying concentrations and temperatures

The concentrations and temperatures of ultrahigh‐molecular‐weight polyethylene (UHMWPE) gel solutions exhibited a significant influence on their rheological and spinning properties. The shear viscosities of UHMWPE solutions increased consistently with increasing concentrations at a constant temperature above 80°C. Tremendously high shear viscosities of UHMWPE gel solutions were found as the temperatures reached 120–140°C, at which their shear viscosity values approached the maximum. The spinnable solutions are those gel solutions with optimum shear viscosities and relatively good homogeneity in nature. Moreover, the gel solution concentrations and spinning temperatures exhibited a significant influence on the drawability and microstructure of the as‐spun fibers. At each spinning temperature, the achievable draw ratios obtained for as‐spun fibers prepared near the optimum concentration are significantly higher than those of as‐spun fibers prepared at other concentrations. The critical draw ratio of the as‐spun fiber prepared at the optimum concentration approached a maximum value, as the spinning temperature reached the optimum value of 150°C. Further investigations indicated that the best orientation of the precursors of shish‐kebab‐like entities, birefringence, crystallinity, thermal and tensile properties were always accompanied with the as‐spun fiber prepared at the optimum concentration and temperature. Similar to those found for the as‐spun fibers, the birefringence and tensile properties of the draw fibers prepared at the optimum condition were always higher than those of drawn fibers prepared at other conditions but stretched to the same draw ratio. Possible mechanisms accounting for these interesting phenomena are proposed.