Morphology and intersections of crazes in polystyrene films

Craze network with interconnecting crazes was produced in thin (~60nm) polystyrene films by using a spherical stretching method. For 30% and 45% radial strain, the average mesh size, defined as the square root of average non-crazed areas enclosed by crazes, decreased from about 28m to 4.6 and 2.7m, respectively, as the molecular weight increased from 46 900 to 1 350 000. At a molecular weight of about 10⁶, the interactions between crazes became evident by the split and change of directions at the end of their propagation. Two types of intersection appeared to exist in parallel. The first type showed void formation at the intersections with no apparent fibril displacement effect. The second type showed that the fibrils at the intersection of two perpendicular crazes reoriented to a new direction which seemed to be determined by the relative displacements of the two crazes at the intersections. This observation suggests that the craze fibrils can be displaced and further stretched by a second crazing process.     

A reinforcement discrete neuro-adaptive control for unknown piezoelectric actuator systems with dominant hysteresis

The theoretical and experimental studies of a reinforcement discrete neuro-adaptive control for unknown piezoelectric actuator systems with dominant hysteresis are presented. Two separate nonlinear gains, together with an unknown linear dynamical system, construct the nonlinear model (NM) of the piezoelectric actuator systems. A nonlinear inverse control (NIC) according to the learned NM is then designed to compensate the hysteretic phenomenon and to track the reference input without the risk of discontinuous response. Because the uncertainties are dynamic, a recurrent neural network (RNN) with residue compensation is employed to model them in a compact subset. Then, a discrete neuro-adaptive sliding-mode control (DNASMC) is designed to enhance the system performance. The stability of the overall system is verified by Lyapunov stability theory. Comparative experiments for various control schemes are also given to confirm the validity of the proposed control.     

Four-Dimensional Visualization of Construction Scheduling and Site Utilization

Four-dimensional (4D) models link three-dimensional geometrical models with construction schedule data. The visual link between the schedule and construction site conditions is capable of facilitating decision making during both the planning and construction stages. The emphases of these 4D developments have often been placed at the level of construction components. Practical features assisting site management are at times lacking in the following areas: (1) generation of site usage layouts; (2) estimation of quantities of construction materials; and (3) cost evaluation. In order to pinpoint these deficiencies, the objective of this work is to enable visual study of the effects of job progress on the logistics and resource schedules. This paper presents a 4D visualization model that is intended both to help construction managers plan day-to-day activities more efficiently in a broader and more practical site management context and to thereby add to our knowledge and understanding of the relevance of modern computer graphics to the responsibilities of the construction site manager. A brief site trial of the software is described at the conclusion of the paper.     

Flood control management system for reservoirs

Flood disaster is one of the most damaging natural disasters in China, with annual average losses more than 200 billion yuan in recent years. After 1995 floods in the Liaohe River and 1998 floods in the Yangtze River, the governments from national to local have realized that the flood control operation of reservoirs can play a major role in alleviating flood losses but there are some problems in flood control management for reservoirs. Most of the existing flood control management systems for reservoir were established for special purposes and are lack of data share and communication with governments, it is very difficult for decision-making departments to get real-time information in short time. Thus, a national programming about flood control management system for reservoirs is presented. The paper is a summary of the outcome of national programming about the flood control management system for reservoirs in China. The background, objectives, main challenges and main contents of the programming are introduced. The main focus is on the issues of the software integration flood control management system for reservoirs. Emphasis is concentrated on the flowchart design of the system and its core components. The current system can be applied to a river control center or a single reservoir because of using the national standard databases and easily integrated into the national flood control system in the future. An application system is briefly introduced in order to understand the system.     

Investigation of electrostrictive polymers as actuators for mesoscale devices

Abstact This paper presents an investigation of the use of electrostrictive silicone polymers as actuators for mesoscale devices. The generated strains of both flat and rolled actuators, based on Dow Corning Sylgard 182 and 184, with sputtered gold electrodes, are presented as functions of the applied electric field. Variables examined in this study include silicone film thickness, gold electrode thickness, cycling of the applied electric field, and actuator configuration (flat or rolled). In general, thinner silicone films and gold electrodes yielded greater strains, at a constant applied field. The actuator performance tended to deteriorate with repeated application of the electric field, and the gold electrodes cracked after being subjected to a large percentage strain.Nomenclature A Cross sectional area, mm² - a ₁ , a ₂ electrostrictive constants, m²/V² - D diameter, mm - E electric field, V/m - _o permittivity of free space, F/m - dielectric constant for silicones, F/m - F force, N - J work, J - l length, m - S _ij strain tensor, dimensionless - S _ijkl tensor of elastic compliance coefficients, m - t thickness, m - T _kl stress tensor, Pa - u _i displacement vector, mm - V volume, mm³ - Poisson ratio, dimensionless - w width, m - Y Youngs modulus, Pa     

Density-controllable growth of SnO2 nanowire junction-bridging across electrode for low-temperature NO2 gas detection

The junction-bridging structure of metal oxide nanowires (NWs) improves gas-sensing properties. In this study, an on-chip growth method was used to fabricate gas sensors, it easily and effectively controls NW junctions. SnO₂ NWs were synthesized by thermal evaporation at 800 °C with tin powder as the source. The density of the NW junctions was controlled by changing the mass of the source material. A source material with large mass yielded high-density NW junctions. With electrode spacing of 20 μm, NW junctions were formed from the source material of larger than 2 mg. Gas sensing results revealed that the junction sensors exhibited a good response to NO₂ gas at a concentration of 1–10 ppm. The sensors exhibited a good response to NO₂ gas at low temperature of up to 100 °C and short response–recovery time (~20 s). The sensors also had good selectivity to NO₂ gas. The response (R _gas /R _air) to 1 ppm NO₂ was as high as 22 at 100 °C, whereas the cross gas responses (R _air /R _gas) to 10 ppm CO, 10 ppm H₂S, 100 ppm C₂H₅OH, and 100 ppm NH₃ were negligible (1.1–1.3).     

Comparison of modified injection molding and conventional machining in biodegradable behavior of perforated cannulated magnesium hip stents

In this study,perforated cannulated magnesium(Mg)hip stents were fabricated via modified Mg injection molding and conventional machining,respectively.Additionally,the stent canal was filled with paraffin to simulate injection of biomaterials.The microstructure,mechanical performance,corrosion behavior,and biocompatibility were comparably studied.Scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS)showed higher affinity of interstitial element such as oxygen and carbon as consequences of routine molding process.After immersion in SBF,machining stents showed reduced degradation rate and increased deposition of calcium phosphate compared to molding stents.Corrosion resistance was improved via paraffin-filling.Consistently,the hemolysis and in vitro osteoblast cell culture models showed favourable biocompatibility in machining stents compared to molding ones,which was improved by paraffin-filling treatment as well.These results implied that the feasibility of the prepared machining stents as the potential in vivo orthopaedic application where slower degradation is required,which could be enhanced by designing canal-filling injection of biomaterials as well.     

Micromechanical digital-to-analog converter for out-of-plane motion

This paper describes a novel micromechanical digital-to-analog converter (MDAC) for out-of-plane motion using electrostatic parallel-plate actuators. The proposed mechanism converts an N-bit digital signal to a mechanical out-of-plane displacement that is proportional to the analog value represented by the N-bit binary word. The mechanism is analogous to that of an electrical binary-weighted-input digital-to-analog converter (DAC). It consists of a movable platform, an array of parallel-plate microactuators each operating in an ON/OFF mode and a set of connection springs that connect the actuators to the platform. The spring constants of the connection springs are weighted so that the stiffness of successive springs is related by a factor of 2. A 4-bit mechanism has been fabricated using the Poly-MUMPS process, achieving a total stroke of 675 nm (full-scale output) and step size (LSB) of 45 nm in a highly repeatable and stable manner. The linearity error (LE) of the device is within /spl plusmn/0.28 LSB, and the differential linearity error (DLE) is within /spl plusmn/0.25 LSB. This mechanism can be configured for many promising applications, particularly in optical devices and systems such as tunable external cavity diode laser, tunable VCSELs, adaptive micromirror array and tunable wavelength filter.     

Switching rate and receiver performance of binary modulations with the selection‐and‐stay combining over independent and correlated Nakagami‐m fading channels

The dual‐branch selection‐and‐stay combining (SSTC) is analyzed for diversity reception on independent and correlated Nakagami‐m fading channels, where the conventional selection combining (SC) is employed only at the switching instance, and the receiver uses the selected branch till its signal‐to‐noise ratio (SNR) estimation is lower than a preset threshold. In this combining scheme, the receiver only needs to continuously estimate the SNR of the single selected branch. For the performance analysis of SSTC, the switching rate and the average bit error rates (BERs) of different binary coherent and non‐coherent modulations are evaluated. Numerical results based on the analysis and simulations are illustrated. According to the analysis and numerical results, the SSTC outperforms the existing switch‐and‐stay combining in the senses of the average BER and switching rate. Copyright © 2011 John Wiley & Sons, Ltd.