Photoelastic confirmation of surface stress relaxation in silica glasses: Fiber bending and rod torsion

Silica glass samples were given various heat treatments under stress at low temperatures and subsequently their residual stress distributions in terms of retardance were observed using a polarized light microscope, confirming previously reported fast surface stress relaxation while providing more detailed characterization. Retardance profiles of silica glass fibers heat-treated under a constant bending strain in the presence of atmospheric water vapor were measured and fit to a previously developed diffusion-based relaxation model. The retardance of a cross-section of a silica glass rod heat-treated at 650°C in lab air under applied torsional shear strain was also measured to confirm the presence of residual surface shear stress which was predicted by the decrease of torque with time for the rod. Together, these results confirm the low-temperature fast surface stress relaxation which occurs when water vapor is present for both bending and shear stresses.     

Determination of assimilable organic carbon (aoc) in ozonated water with acinetobacter calcoaceticus

The effect of ozone application in drinking water on the production of assimilable organic carbon (AOC) was evaluated. The typical procedure to determine AOC is suggested by van der Kooij, which is the method of bacterial growth measurement by colony‐forming units using the strain P17 and/or NOX. The bacterial indicator species used for this study is Acinetobacter calcoaceticus which was isolated and identified while ozonating Nakdong river water. This strain could never be isolated from the raw water, but this strain was the predominant isolate in the ozonated water. Within a short incubation time, this organism was found to replicate well on acetate and oxalate as the sole carbon sources. The yield coefficients of this organism for acetate and oxalate are the same order of magnitude as the value of P17 and NOX. With full‐scale experiments, A. calcoaceticus concentration was found to increase after ozonation, but did not decrease upon chlorination. In laboratory‐scale experiments with Yongsan river water, aldehyes were found to be produced in proportion to the ozone dose. The raw water contains low concentrations of aldehydes, but has a high AOC concentration. A correlation between aldehyde production and AOC production was observed in the tested water with ozonation.     

Conductive and flexible multi-walled carbon nanotube/polydimethylsiloxane composites made with naphthalene/toluene mixture

Conventional conductive materials face challenges when utilizing them for flexible and wearable electronics and soft robotics. Carbon nanotube/polydimethylsiloxane (CNT/PDMS) composites are a promising alternative to the conventional hard conductors because they are light and can realize large deformation. To date, well dispersion of CNTs into PDMS to increase conductivity while maintaining flexibility remains challenging. We aimed at developing highly electrically conductive and flexible multi-walled carbon nanotube/PDMS (MWCNT/PDMS) composites. To this end, we proposed a method to enhance the dispersion of MWCNTs into PDMS using naphthalene and toluene. Our results showed that the addition of naphthalene and toluene into the composites improved dispersion of the MWCNTs and increased the direct current (DC) electrical conductivity. We also found that the morphology of primary aggregates of the MWCNTs influenced the DC electrical conductivity of the composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48167.     

Development of Novel Inhibitors for Histone Methyltransferase SET7/9 based on Cyproheptadine

The histone methyltransferase SET7/9 methylates not only histone but also non‐histone proteins as substrates, and therefore, SET7/9 inhibitors are considered candidates for the treatment of diseases. Previously, our group identified cyproheptadine, used clinically as a serotonin receptor antagonist and histamine receptor (H1) antagonist, as a novel scaffold of the SET7/9 inhibitor. In this work, we focused on dibenzosuberene as a substructure of cyproheptadine and synthesized derivatives with various functional groups. Among them, the compound bearing a 2‐hydroxy group showed the most potent activity. On the other hand, a 3‐hydroxy group or another hydrophilic functional group such as acetamide decreased the activity. Structural analysis clarified a rationale for the improved potency only by tightly restricted location and type of the hydrophilic group. In addition, a SET7/9 loop, which was only partially visible in the complex with cyproheptadine, became more clearly visible in the complex with 2‐hydroxycyproheptadine. These results are expected to be helpful for further structure‐based development of SET7/9 inhibitors.     

Highly conductive alumina/NCN composites electrodes fabricated by gelcasting and reduction-sintering—An electrochemical behavior study in aggressive environments

A novel highly conductive alumina/nano-carbon network composites (alumina/NCN composites) was fabricated by gelcasting and reduction-sintering method under argon atmosphere. The electrochemical behaviors of the alumina/NCN composites were studied systematically in some aggressive solutions (HCl, H₂SO₄, HNO₃, NaOH, and KOH), using potentiodynamic polarization and chronoamperometry and X-ray diffraction and SEM observations. The results showed that the electrochemical stability and reproducibility of the composite electrodes in these diluted acids and alkalis were very good and had, in some extent, an electro-catalytic activity toward formation of hydrogen evolution and reduction of dissolved oxygen in aqueous solutions in comparison with a commercial graphite electrode. In addition, the pyrolyzed nano-carbon contents, size, and shape in the alumina matrix, have greatly effects on the electrochemical performances and electrode reactions in these solutions. It is found that the minimal residual carbon content of 0.62 wt.% in the matrix is enough to improve electrochemical performances and avoid to loss the ceramics physical properties at the same time. When the additional potential in all the tested electrolytes was at +1700 mV (vs. SCE), alumina particles at the electrode surface were not observed to dissolve into solution in this case, indicating the material being suitable for electrodes in aggressive solutions.     

Growth of emerald crystals from PbO · V2O5 flux

The flux growth of emerald crystals by slow cooling in the PbO · V₂O₅ flux is reported. The crystals exhibited the typical emerald-green colour, were up to 1.8 mm in size and transparent. Their form was a regular hexagonal rod bounded by the well-developed {0001} and {10ˉ10} faces. The solubility of emerald in PbO · V₂O₅ was also investigated; about 9.0 g emerald was dissolved in 100 g PbO · V₂O₅ at 1200 °C. The solubility decreased gradually with decreasing temperature. Taking the solubility data into account, the presence of undissolved particles in the solution was found to be a necessary condition for the growth of large emerald crystals. Unsaturated solution at a soak temperature produced good and relatively small emerald crystals in a subsequent cooling experiment. Advantages of the PbO · V₂O₅ flux are also mentioned. Emerald crystals showing various kinds of imperfections, and even good crystals, were also present.     

2D Model-Following Servo System

This paper gives, in view of the feature of practical 2D (2-dimensional) systems, a formulation of the 2D model-following servo problem for the case where one of the independent variables of the considered 2D systems is unbounded and the other one is bounded. That is, to determine a control input such that the outputs of a given 2D plant asymptotically track, with tracking error as small as possible, the (step) response of a given 2D model system as the unbounded variable approaches infinite. It is shown that this problem under a specified quadratic performance index can be transformed into a 1D LQR problem, and thus can be solved by the well-known 1D approaches. The relation between the solvability condition obtained for the equivalent 1D LQR problem and the practical stabilizability and detectability of the original 2D plant is clarified. Its application to the design of non-unit memory linear multipass processes is also shown. Finally, a numerical example for metal rolling process is given to verify the effectiveness.     

Antioxidant activity of Japanese pepper (Zanthoxylum piperitum DC.) fruit

Antioxidants were extracted from Japanese pepper (Zanthoxylum piperitum DC.) fruit and characterized. The antioxidant activity of the methanol extract from Japanese pepper fruit was found to be equal to that of α-tocopherol and stable under heat treatment. The main compounds that gave a significant antioxidant activity from the methanol extract were identified to be hyperoside (quercetin-3-O-galactoside) and quercitrin (quercetin-3-O-rhamnoside) as determined by HPLC, mass spectrometry, UV/Vis spectroscopy, and TLC. Radical-scavenging activities of hyperoside and quercitrin from Japanese pepper fruit were evaluated using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) method. As a result, hyperoside and quercitrin scavenged DPPH radical strongly with IC₅₀ values of 16 and 18 μM, respectively. These observations show the presence of strong antioxidants, namely hyperoside and quercitrin in Japanese pepper fruit.     

Design study of PbBi- and NaK-cooled small deep sea fast reactors

The liquid lead-bismuth eutectic (PbBi) has good compatibility with water, which is different from sodium. It is expected that the PbBi could be used as a coolant of the deep sea fast reactor (DSFR). Physics analysis of the PbBi-cooled small reactor cores with and without inner control rods performed using the computer program of a neutronics code system (SRAC95) shows that PbBi is suitable for the coolant of small reactors as well as NaK.