A negative Vth cell architecture for highly scalable,excellently noise-immune, and highly reliable NAND flash memories

A new, negative V_th cell architecture is proposed where both the erased and the programmed state have negative V_th. This architecture realizes highly scalable, excellently noise-immune, and highly reliable NAND flash memories. The program disturbance that limits the scaling of a local oxidation of silicon (LOCOS) width in a conventional NAND-type cell is drastically reduced. As a result, the scaling limit of the LOCOS width decreases from 0.56 to 0.45 μm, which leads to 20% isolation width reduction. The proposed cell is essential for the future scaled shallow trench isolated cells because improved program disturb characteristics can be obtained irrespective of the process technology or feature size. New circuit techniques, such as a PMOS drive column latch and a V_cc-bit-line shield sensing method are also utilized to realize the proposed cell operation. By using these novel circuit technologies, array noise, such as a source-line noise and an inter bit line capacitive coupling noise, are eliminated. Consequently, the V_th fluctuation due to array noise is reduced from 0.7 to 0.1 V, and the V_th distribution width decreases from 1.2 to 0.6 V. In addition to the smaller cell size and the high noise immunity, the proposed cell improves device reliability. The read disturb time increases by more than three orders of magnitude, and a highly reliable operation can be realized     

Highly conductive alumina/NCN composites electrodes fabricated by gelcasting and reduction-sintering—An electrochemical behavior study in aggressive environments

A novel highly conductive alumina/nano-carbon network composites (alumina/NCN composites) was fabricated by gelcasting and reduction-sintering method under argon atmosphere. The electrochemical behaviors of the alumina/NCN composites were studied systematically in some aggressive solutions (HCl, H₂SO₄, HNO₃, NaOH, and KOH), using potentiodynamic polarization and chronoamperometry and X-ray diffraction and SEM observations. The results showed that the electrochemical stability and reproducibility of the composite electrodes in these diluted acids and alkalis were very good and had, in some extent, an electro-catalytic activity toward formation of hydrogen evolution and reduction of dissolved oxygen in aqueous solutions in comparison with a commercial graphite electrode. In addition, the pyrolyzed nano-carbon contents, size, and shape in the alumina matrix, have greatly effects on the electrochemical performances and electrode reactions in these solutions. It is found that the minimal residual carbon content of 0.62 wt.% in the matrix is enough to improve electrochemical performances and avoid to loss the ceramics physical properties at the same time. When the additional potential in all the tested electrolytes was at +1700 mV (vs. SCE), alumina particles at the electrode surface were not observed to dissolve into solution in this case, indicating the material being suitable for electrodes in aggressive solutions.     

Molecular dynamics simulation of pressure effect on phase transition behaviour and dynamics in the isotropic and discotic nematic phases

Molecular dynamics simulation was performed at constant temperature and pressure to investigate the effect of pressure on molecular dynamics for disc-shaped molecules. The generic Gay-Berne model, GB(0.345, 5.0, 1, 3), was used to study the phase transition behaviour, and translational and rotational dynamics, under two different reduced pressures P^?, 10.0 and 20.0. Obvious shifts were detected in the transition temperatures. Both systems have the same phase sequence with different pressures: isotropic, discotic nematic and columnar phases. Translational motion is characterised by the parallel and perpendicular components of diffusion coefficients, with respect to the director in the orientational ordered phase. With regard to rotational dynamics, the correlation time of the first-rank orientational time autocorrelation function, which corresponds to end-over-end rotational motion of a molecule, has been investigated. A clear jump in the temperature dependence of the correlation time has been found at the isotropic-nematic phase transition point. The retardation factor g_|| as a function of the reduced temperature T^?/T_NI^? shows an apparent pressure effect on the rotational dynamics.     

Propagation Path Visibility Estimation for Radio Local Distribution Systems in Built-Up Areas

For the design of radio local distribution systems in densely built-up areas, estimating how many subscribers are in sight from a nodal station is important. This paper proposes a method for estimating probability of success of line-of-sight paths termed visibility. Method validity is confirmed bypractical field examinations.     

Ion-implanted and permalloy hybrid magnetic bubble memory devices

Hybrid bubble memory devices have been proposed and operated with the memory density of 4 Mbit/cm². In the hybrid bubble memory devices, minor loops are composed of ion-implanted tracks with 4-µm period, and major lines and functional parts including block-replicate and swap gates are composed of Permalloy tracks with a longer period of 12 µm. Passive junctions between ion-implanted and Permalloy tracks have been developed, introducing the tapered ion-implantation technique. Improving the characteristics of the functional parts composed of Permalloy tracks, the hybrid bubble memory devices with block-replicate and swap gates have been operated, and the feasibility of the devices has been confirmed. In addition, the possibility of higher memory density has been shown.     

Significant improvement of magnetic properties and corrosion resistance in evaporated Co-Ni recording media

An addition of a very small amount of Pr in Co-Ni films of a recording medium improves both corrosion resistance and frequency response. The columnar grains, which are induced by oblique incidence of evaporation, becomes remarkably finer by the addition of rare-earth elements. The TEM image of the cross section of the films shows a dense packed structure. High magnetization and a better corrosion resistance are considered to be due to the dense packed structure. The fine grain improves the frequency response. Among several rare-earth elements, especially Pr doping yields a best recording performance.     

Characteristics of porous polymer composite columns prepared by radiation cast-polymerization

Porous polymer composite columns having porous structure were prepared by radiation cast-polymerization of hydrophilic monomers at low temperature and their characteristics were studied. The porosity of the polymer increased with decreasing monomer concentration. The elution time of water in the polymer column increased with increasing monomer concentration and with decreasing irradiation temperature. The elution time was dependent on the degree of hydration of the polymer. The polymer with a degree of hydration of 0.2 to 0.4 gave the minimum elution time. The elution time decreased with the addition of porous inorganic substances.     

Growth of emerald crystals from PbO · V2O5 flux

The flux growth of emerald crystals by slow cooling in the PbO · V₂O₅ flux is reported. The crystals exhibited the typical emerald-green colour, were up to 1.8 mm in size and transparent. Their form was a regular hexagonal rod bounded by the well-developed {0001} and {10ˉ10} faces. The solubility of emerald in PbO · V₂O₅ was also investigated; about 9.0 g emerald was dissolved in 100 g PbO · V₂O₅ at 1200 °C. The solubility decreased gradually with decreasing temperature. Taking the solubility data into account, the presence of undissolved particles in the solution was found to be a necessary condition for the growth of large emerald crystals. Unsaturated solution at a soak temperature produced good and relatively small emerald crystals in a subsequent cooling experiment. Advantages of the PbO · V₂O₅ flux are also mentioned. Emerald crystals showing various kinds of imperfections, and even good crystals, were also present.     

2D Model-Following Servo System

This paper gives, in view of the feature of practical 2D (2-dimensional) systems, a formulation of the 2D model-following servo problem for the case where one of the independent variables of the considered 2D systems is unbounded and the other one is bounded. That is, to determine a control input such that the outputs of a given 2D plant asymptotically track, with tracking error as small as possible, the (step) response of a given 2D model system as the unbounded variable approaches infinite. It is shown that this problem under a specified quadratic performance index can be transformed into a 1D LQR problem, and thus can be solved by the well-known 1D approaches. The relation between the solvability condition obtained for the equivalent 1D LQR problem and the practical stabilizability and detectability of the original 2D plant is clarified. Its application to the design of non-unit memory linear multipass processes is also shown. Finally, a numerical example for metal rolling process is given to verify the effectiveness.     

A Microcomputer System for Spatiotemporal Visual Receptive Field Analysis

A microcomputer system was developed to measure visual spatiotemporal receptive fields. The system performs three functions: 1) generation of a binary spatiotemporal white-noise stimulus, 2) acquisition of spike discharges from retinal ganglion cells, and 3) extraction of the linear part of the spatiotemporal receptive flelds by cross correlating the input against the output. We have applied this system to the measurement of the spatiotemporal receptive fields of cat and catfish retinal ganglion cells.