Ajisai Spin Parameter Determination Using Graz Kilohertz Satellite Laser Ranging Data

The spin rate and direction of the spherical satellite Ajisai and its slowdown between October 2003 and June 2005 were determined using Graz full-rate kilohertz satellite laser ranging (SLR) data. The high density of the kilohertz data results in a precise scanning of the satellite's retroreflector panel orientation during the spin motion. Applying spectral analysis methods, the resulting frequencies allow the identification of the arrangement of the involved laser retroreflector panels at any instant in time during the pass. Using this method, the spin rate with a high accuracy (a root mean square of 4.03times10^-4 Hz) and the slowdown of the spin rate during the investigated period with a magnitude of 0.0077497 Hz/year were calculated. These results were obtained in near real time from automatically performed analysis procedures during routine SLR tracking, i.e., day and night observations without any additional hardware     

Organic phase PPO biosensor based on hydrophilic films of electropolymerized polypyrrole

We described herein, the construction of an organic phase enzyme electrode (OPEE) via polyphenol oxidase (PPO) entrapment within a hydrophilic polypyrrole film electrogenerated from on a new bispyrrolic derivative (1) containing a long hydrophilic spacer. The so-called “adsorption step procedure” was adopted for the preparation of the organic phase PPO biosensor. The amperometric detection of catechol was carried out in anhydrous chloroform at −0.2 V versus Ag/AgCl. The electroanalytical parameters of the biosensor strongly depend on its configuration and on the hydration state of the enzyme matrix. The best sensitivity obtained for catechol in chloroform was 15.6 mA M⁻¹ cm⁻².     

Polysiloxane‐lignin composites

A series of composites based on polydimethylsiloxane‐α,ω‐diol (PDMS) as polymeric matrix, silica aerogel as reinforcing filler, and the lignin powder—a biomass derivative, as bulking filler, have been prepared. Different weight ratios between components were used. The composites were investigated by scanning electron microscopy, dynamic mechanical analysis, tensile strength tests, X‐ray diffraction analysis, thermogravimetric analysis, and differential scanning calorimetry. The results were compared with those obtained on a reference sample prepared by using a classical material—diatomite and a pure crosslinked PDMS. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(ether imide)s containing cyano substituents and thin films made from them

A series of poly(ether imide)s containing functional cyano groups has been prepared by polycondensation reaction of 2,6‐bis(m‐aminophenoxy)benzonitrile with different bis(ether dianhydride)s, such as 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]isopropane dianhydride, 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)‐phenyl]hexafluoroisopropane dianhydride, 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride, and 3,3‐bis[4‐(3,4‐dicarboxyphenoxy) phenyl]phthalide dianhydride. The polymers were soluble in polar aprotic solvents and even in less polar solvents and were processed into thin films by casting their solutions. The properties of the polymers, particularly the crosslinking of macromolecular chains through cyano groups, were studied by using dynamic mechanical analysis (DMA), thermal stability, glass transition, and solubility measurements. Also, the molecular relaxations were evidenced by DMA and dielectric spectroscopy. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of addition of nanosized UV absorbers on the physico-mechanical and thermal properties of an exterior waterborne stain for wood

This study describes the effects of the addition of inorganic nanosized UV absorbers on physico-mechanical and thermal properties of an exterior commercial acrylic-based waterborne stain for wood. Electronic microscopy and water vapor (WV) permeability measurements were performed to characterize the free films of the acrylic stain and resulting nanocomposite coatings. An accelerated weathering method was used to evaluate aging behavior of the coatings on wood through appearance, T_g, abrasion resistance, adhesion strength, hardness and Young's modulus changes. In addition to improving the protection against UV, the doped TiO₂ and silica-coated ZnO nanoparticles in powder form have improved the abrasion resistance and barrier effect against water vapor diffusion of the acrylic stain. For most of nanocomposite coatings, the addition of ZnO hydrophilic nanoparticles in predispersed form has resulted in a decrease in WV permeability, while the adhesion strength and abrasion resistance of those coatings were negatively affected. The addition of ZnO nanoparticles has decreased the T_g of the acrylic stain. Finally, the accelerated weathering has induced an increase in T_g, hardness, Young's modulus (stiffness) and an increase in apparent adhesion strength and abrasion resistance of the coatings. The T_g values of the aged nanocomposite coatings were lower than that of unmodified acrylic stain.     

Chain packing versus chain mobility in semialiphatic BTDA-based copolyimides

A series of partially aliphatic copolyimides derived from 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), 4,4′-diaminodiphenylmethane (DDM) and 1,6-diaminohexane (DAH) was synthesized. Solubility tests and structural characteristics, evaluated by wide-angle X-ray diffraction measurements (WAXD) did not vary steadily with the content of the flexible segment. On the dynamic mechanical analysis (DMA) the evolution of the secondary relaxations (γ and β) suggested an increased chain tightness as more aliphatic component is included. The onset temperature of α-relaxation decreased regularly with the content of aliphatic sequence. During the α-relaxation the trend of E′, E″ and tan δ with temperature, and at multiple frequencies, evidenced the overlapping of phenomena. The increased mobility determines the formation of oriented structures that behave as constraints. Simultaneously, as the flexible content (DAH segment) is more important, orientation relaxations take place with increasing temperature. The equilibrium between stiffening and flowing makes the polyimides with high aliphatic content behave like elastomers.     

Hybridisation of LEDs with silicon microsensors

This paper presents the experiments we performed for hybrid integration of LEDs with silicon optical readout microsensors. LEDs were face down mounted, in a silicon cavity, on the same wafer with the sensor. The edge-emitted light is coupled into SiON waveguides. The LEDs hybridization steps were included in the technological processes of two types of silicon microsensors: chemo-optical and mechano-optical sensors. The proper technological steps succession was established according to the limitation imposed by lithography on wafers with deep groves and the thermal behavior of transducing layers. The main problem we solved was the matching of all the involved processes: integrated optics, micromachining, thin-film technology, CMOS technology.