The comparative study of biocomposites based on hydrochar and chitosan-modified urea-formaldehyde resins

To provide new insight into the field of urea-formaldehyde (UF) adhesives science, in this work, for the first time, UF resin was modified with hydrochar of spent mushroom substrate (HCUF) and chitosan (CHUF) to investigate the effect of these bio-fillers on the hydrolytic and thermal stability of in situ prepared UF resins. The characterization of the modified UF biocomposites was performed using X-ray diffraction analysis (XRD), Fourier transforms infrared spectroscopy (FTIR), non-isothermal thermogravimetric analysis (TG), differential thermal gravimetry (DTG), and differential thermal analysis (DTA). Scanning electron micrographs (SEM) of the CHUF and HCUF biocomposites show a spherical structure that differs from each other because the surface of the CHUF biocomposite has pronounced pores that form a network structure. With its hydroxyl and amino groups, chitosan bonding to UF resin through hydrogen bonds, which is confirmed by FTIR analysis. The content of free FA in CHUF biocomposite is 0.06%, while that of HCUF is higher and amounts to 0.48%. The content of released FA in both modified UF biocomposites was similar (2.5% and 2.8% for CHUF and HCUF, respectively). The hydrolytic stability of CHUF is slightly higher compared to the HCUF biocomposite. Thermal analysis shows that the CHUF is thermally more stable because it starts to decompose at a slightly higher temperature than the HCUF biocomposite.     

Heterologous Expression and Partial Characterization of a Putative Opine Dehydrogenase from a Metagenomic Sequence of Desulfohalobium retbaense

The aim of this research was to prove the function of the putative opine dehydrogenase from Desulfohalobium retbaense and to characterize the enzyme in terms of functional and kinetic parameters. A putative opine dehydrogenase was identified from a metagenomic library by a sequence-based technique search of the metagenomic library, and afterward was successfully heterologously produced in Escherichia coli. In order to examine its potential for applications in the synthesis of secondary amines, first the substrate specificity of the enzyme towards different amino donors and amino acceptors was determined. The highest affinity was observed towards small amino acids, preferentially L-alanine, and when it comes to α-keto acids, pyruvate proved to be a preferential amino acceptor. The highest activity was observed at pH 6.5 in the absence of salts. The enzyme showed remarkable stability in a wide range of experimental conditions, such as broad pH stability (from 6.0–11.0 after 30 min incubation in buffers at a certain pH), stability in the presence of NaCl up to 3.0 M for 24 h, it retained 80 % of the initial activity after 1 h incubation at 45 °C, and 65 % of the initial activity after 24 h incubation in 30 % dimethyl sulfoxide.     

A 3D oxalate-bridged [CuIIFeII] coordination polymer as molecular precursor for CuFe2O4 spinel—photocatalytic features

A 3D heterometallic oxalate-bridged coordination polymer [Cu^IIFe^II₂(H₂O)(terpy)(C₂O₄)₃]_n (terpy = 2,2′:6′,2″-terpyridine) ( 1 ) was investigated both as photocatalyst for the organic dye removal and as a single-source precursor for the preparation of the copper ferrite (CuFe₂O₄) nanocrystals by thermal processing. The dual functionality of 1 was supported by the degradation of aqueous solutions of rhodamine B (RhB) and methylene blue (MB) solutions under visible (Vis) and ultraviolet (UV) light irradiation, powder X-ray diffraction data collection at room temperature, and the optical and scanning electron microscopy analyses. A close inspection of the X-ray diffraction patterns unveiled qualitative and quantitative information on the phase composition obtained after the single-source molecular precursor route to spinel oxide. By optimizing the temperature levels and setting the controlled heating rate at 6 h of holding time, the phase composition of thermal processing of 1 was evaluated—thermal treatment of 1 at 950°C for 6 h and a heating/cooling rate of 10°C min⁻¹ resulted in the formation of solely tetragonal spinel phase of CuFe₂O₄, whereas the formation of both tetragonal and cubic CuFe₂O₄ phases was observed at 950°C by the heating rate of 30°C min⁻¹. To obtain the high-temperature cubic CuFe₂O₄ oxide, compound 1 was heated and then quenched at 925°C, which led to the formation of the cubic spinel ferrite as the main crystalline oxide phase. Moreover, the photocatalytic properties of the t-CuFe₂O₄ spinel were investigated under the same conditions as for 1 . The optical bandgap energies were estimated from UV–Vis absorption spectra for both metal oxide and precursor powder.     

Water‐soluble/dispersible carbazole‐containing random and block copolymers by nitroxide‐mediated radical polymerisation

A series of carbazole‐containing water‐dispersible poly(acrylic acid)‐b‐(9‐(4‐vinylbenzyl)‐9H‐carbazole) block copolymers (poly(AA)‐b‐poly(VBK)) and water‐soluble poly(methacrylic acid‐ran‐(9‐(4‐vinylbenzyl)‐9H‐carbazole)) (poly(MAA‐ran‐VBK)) random copolymers were synthesised in a controlled manner (i.e. low polydispersities $(\overline {M_{{\rm w}} } /\overline {M_{n} } < 1.3)$ by nitroxide‐mediated polymerisation (NMP) using an SG1‐based alkoxyamine initiator, BlocBuilder. Poly(AA)‐b‐poly(VBK) block copolymers were most easily accessed by using poly(AA) in its protected form as the macroinitiator for the 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) block. Controlled polymerisation of MAA was accomplished using an excess of 10 mol.% SG1 relative to BlocBuilder with VBK as controlling co‐monomer (initial molar feed content f_VBK,0 = 0.03–0.20) in dimethylformamide at 80°C. Poly(MAA‐ran‐VBK) copolymers with a final VBK molar composition of F_VBK < 0.30 resulted in water‐soluble copolymers. In addition, as macroinitiators, poly(MAA‐ran‐VBK)s were sufficiently pseudo‐living to reinitiate a second batch of monomer (90 mol.% methyl methacrylate with styrene) in organic solvent and by ab initio, surfactant‐free emulsion polymerisation. In both cases, low polydispersity, amphiphilic block copolymers resulted $(\overline {M_{{\rm w}} } /\overline {M_{{\rm n}} } < 1.3)$ . © 2012 Canadian Society for Chemical Engineering     

Internal configurations for a multi-product dividing wall column

This paper addresses possibilities and peculiarities associated with establishing the most beneficial internal configuration of a complex dividing wall column (DWC), using as a base case the separation of a multicomponent aromatics mixture into four or five product streams. As expected, the V_min-diagram method proved to be an appropriate tool in such a study, as a means for identifying and assessing promising configurations and at the same time to provide the necessary inputs and reliable initial guesses for detailed simulation-based determination of energy and stage requirements. A new, energy efficient two-top product configuration is introduced that appears to be an interesting option for a four-product DWC.     

Regulated fractionally integrated processes

Regulated (bounded) integrated time series are of significant practical importance and a recent development in the time series literature. Although regulated integrated series are characterized by asymptotic distributions that differ substantially from their unregulated counterparts, most inferential exercises continue to be performed with complete disregard for this potential feature of time series data. To date, only Cavaliere (2005) and Cavaliere and Xu (2011) have attempted to develop a theory for regulated integrated time series, particularly in the context of unit root testing. Unfortunately, no such theory has been developed for regulated fractionally integrated series, which are particularly important in financial time series and also in some unit root testing literature. This article achieves just this: it establishes a framework for regulated fractionally integrated processes and develops their functional central limit distributions. In addition, this article presents some simulation evidence and discusses several algorithms for obtaining the limiting distributions for these processes.     

Spray-dried nanoparticle-loaded pectin microspheres for dexamethasone nasal delivery

Abstract

In this study, we present the development of an innovative dry powder dexamethasone (Dex) nasal delivery system comprising Dex-loaded lipid/alginate nanoparticles incorporated within pectin microspheres (Dex/NPs-loaded pectin microspheres; DNM). DNM microspheres were characterized by the mean diameter of 2.76?±?0.10?µm, zeta-potential of –36.2?±?1.1?mV, and drug loading of 3.3?±?0.3%. The morphology study revealed irregular microsphere surface forming external voids. In contact with simulated nasal fluid, DNM microspheres demonstrated desirable property of moderate swelling and ensured stronger mucoadhesion compared with conventional Dex-loaded pectin microspheres. The strategy of Dex incorporation within the lipid/alginate NPs resulted in prolonged Dex release in relation to Dex being directly entrapped within the conventional pectin microspheres. DNM microspheres showed excellent biocompatibility and rendered Dex permeation across the selected epithelial cell model similar to that of Dex solution. In conclusion, balanced biopharmaceutical properties of the proposed nasal Dex delivery system provides the potential for prolonged contact time with nasal mucosa, prolonged therapeutic effect, and improved patient compliance.     

THE INFLUENCE OF PRESSURE AND TEMPERATURE ON THE KINETICS OF VACUUM DRYING OF KETOPROFEN

ABSTRACT

This paper explores the influence of temperature and pressure on drying kinetics of 2-(3-benzoylphenil propionic acid) ketoprofen, in a vacuum dryer on laboratory scale, Experimentally determined relations between moisture content and drying rate vs time, were approximated with an exponential model. Model parameters were correlated with drying conditions (temperature, pressure) and defined by functions of their potentions.

From an energy balance of the process, a mathematical model for simulating dependence of sample temperature vs drying time, and moisture content of material, has been developed.

Simulation of the drying kinetics and sample temperature, by use of those functional dependencies shows good agreement with experimental results.     

MODELLING GAS-SOLID FLOW IN A PNEUMATIC-FLASH DRYER

ABSTRACT

Investigations of aerodynamics of gas-solid flow in a pneumatic-flash dryer in semiindustrial scale have been carried out. Apparatus was composed of three elements with varying cross-sectional area connected together, i.e. expanding cone, decreasing cone and a vertical pipe with constant diameter. A mathematical model of the dryer is based on the continuity equations for both gas and solid phase and on differential equations for momentum balance of the gas-solid mixture and momentum balance of the solid phase. The model has been solved by means of Gear's numerical method. The effect of various empirical correlations for the solid-wall friction factor has been shown. Distributions, resulting from the model, for pressure, gas velocity, panicle velocity, voidage and residence time of panicle along the axis of apparatus have been presented. The results of numerical calculations have been verified on the basis of measurements in pan.