Characterization of ketoprofen‐loaded PEG‐CH semi‐IPN system for wound dressing application

Polymer systems, in the form of crosslinking networks, have been widely used in biomedicine. However, they are a challenge mainly due to the impact of their physicochemical properties on release kinetics of drugs. Ketoprofen is an analgesic anti‐inflammatory drug with short half‐life (<2 h) and quickly eliminated by the body. Topical administration of ketoprofen can reduce pain, accelerate the wound healing process, and minimize the risk of systemic side effects. Therefore, the aim was to synthesize, characterize, and evaluate a novel ketoprofen polymer system in the form of a semi‐interpenetrated network of poly(ethylene glycol)‐chitosan. The pore size studied by small‐angle X‐ray scattering showed the presence of nanoscale pores, 13.7 nm (dry state) and 26.18 nm (swollen form). The maximum swelling was 420 ± 45% at 24 h. Finally, the encapsulated ketoprofen (6.5%) was released at a constant concentration (0.12 ± 0.03 mg/mL, 8 h) and half of the doses up to 24 h. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46644.     

Synthesis and characterization of silicone-modified polyester as a clearcoat for automotive pre-coated metals

Four types of silicone-modified polyester resins were synthesized for cleanable characteristics with silicone intermediate, which has a long chain, to extend the polymer chains of the resins. These resins were formulated to make polyester/melamine heat-cured coatings to control the formability. The characteristics, viscoelastic behavior and flexibility of the resins were measured by DMA and tensile test. The contact angle measurement can be measured by the water repellence of the coating surface, which is a standard method to evaluate cleanable characteristics. The surface free energy was calculated by the contact angle measurement, and the surface analysis of each cured coating was evaluated using an XPS. Silicone-modified polyester coatings were coated on the cold rolled steel sheets to verify their formability, using a deep drawing test. Results showed that the storage modulus decreased, and the glass transition temperature shifted to a lower temperature with increasing contents of silicone intermediate. So, silicone intermediate provides lower stiffness and higher softness to polyester coating. To analyze the formability, we calculated F_U (the forming coefficient based on strain energy) and F_? (the forming coefficient based on strain). When F_U and F_? are both larger than 1, the polyester coatings have good formability. CSiPE-3 and CSiPE-5 had good formability. Also, CSiPE-5, which had the highest amount of silicone intermediate, had 93.5° of water contact angle, and had 26.5 mN/m of surface free energy and had 5.5 N/25 mm of the peel strength. So, it is implied that silicone intermediate can give a low surface energy and peel strength to polyester coatings. From those tests, the polyester/melamine coating of CSiPE-5 that had 0.5 mol of silicone intermediate had good formability and low peel strength, which are semi-removable characteristics. So, it would be an appropriate coating as a clearcoat for automotive pre-coated metals.     

Fate of organochlorine contaminants in arctic and subarctic lakes estimated by mass balance modelling

Elevated concentrations of some persistent organic pollutants (POPs) in fish from arctic and subarctic lakes have been hypothesized to be due to processes within food webs and fish physiology. We investigated limnological processes and contaminant chemistry as explanations of these elevated concentrations by developing and applying fugacity-based mass balance models to a relatively small lake in the high arctic and a series of larger lakes in the southern Yukon River basin. The results indicate that high arctic lakes are transient and inefficient sinks for POPs. The mobility of POPs in high arctic lakes is conferred by their hydrologic regime (i.e. partial through flow of melt water loadings) and minimal scavenging and retention in sediments due to extremely low organic carbon in settling and sediment particles. Contaminant dynamics in lakes of the south Yukon River basin are governed by hydrology (i.e., water residence time), because, similarly to high arctic lakes, most of the contaminant inventory resides in the water column due to inefficient scavenging by settling particles. For the less persistent compounds, long water residence time shifts the major loss process from export to degradation. Model results also suggest relatively short degradative half-lives of the hexachlorocyclohexanes (sum of HCHs) and endosulfan, particularly in high arctic Amituk Lake.     

Cellular and molecular responses of smooth muscle cells to surface nanotopography

Recent studies have demonstrated that surface nano-topography affect cell responses and activities. However, the molecular mechanism of the nano-structures on cellular behavior is yet to be determined. To bridge this gap, the present study was aimed to investigate the cellular and molecular responses of smooth muscle cells (SMCs) to surface nano-topography in vitro using nano-porous alumina membranes with different sizes (200 nm- and 20 nm-pores). Cellular responses such as cell adhesion, morphology, and proliferation were assessed using scanning electron microscopy (SEM), hematoxylin and eosin (HE) staining, and cell counting. The molecular cell responses were also investigated using cDNA microarrays. Results from these studies showed an unchanged response in cell adhesion, an alteration in cell morphology, and an increase in cell proliferation for cells grown on 200 nm-pore surfaces than on 20 nm-pore surfaces. In addition, exposure of SMCs to larger nano-pores induced the expression of various genes involved in cell cycle, DNA replication, cell proliferation, and signaling transduction pathways. These findings demonstrated that cellular responses of SMCs are dependent on the underlying nano-topography, and thereby suggesting nano-dimensional surface is one of the most important considerations to design of the next generation of medical devices and tissue engineering scaffolds.     

In situ applications of a new diver-operated motorized microsensor profiler

Microsensors are powerful tools for microenvironment studies, however their use has often been restricted to laboratory applications due to the lack of adequate equipment for in situ deployments. Here we report on new features, construction details, and examples of applications of an improved diver-operated motorized microsensor profiler for underwater field operation to a water depth of 25 m. The new motorized profiler has a final precision of 5 microm, and can accommodate amperometric Clark-type microsensors for oxygen and hydrogen sulfide, potentiometric microsensors (e.g., for pH, Ca2+), and fiber-optic irradiance microsensors. The profiler is interfaced by a logger with a signal display, and has pushbuttons for underwater operation. The system can be pre-programmed to autonomous operation or interactively operated by divers. Internal batteries supply power for up to 24 h of measurements and 36 h of data storage (max. 64 million data points). Two flexible stands were developed for deployment on uneven or fragile surfaces, such as coral reefs. Three experimental pilot studies are presented, where (1) the oxygen distribution in a sand ripple was 3-D-mapped, (2) the microenvironment of sediment accumulated on a stony coral was studied, and (3) oxygen dynamics during an experimental sedimentation were investigated. This system allows SCUBA divers to perform a wide array of in situ measurements, with deployment precision and duration similar to those possible in the laboratory.     

Prevalence of Bacillus spp. in different food products collected in Argentina

The prevalence of Bacillus spp. in 279 samples of different food products collected in Argentina was studied. Bacillus spp. was confirmed in 28 out of 70 honey samples, 29 out of 29 flour samples, 15 out of 50 cheese samples, and 30 out of 30 spice samples, while Bacillus spp. was not found in fresh anchovy. Among the 70 honeys studied, Bacillus cereus, Bacillus pumilus, Bacillus laterosporus and Paenibacillus larvae subspp. larvae showed an incidence of 23%, 4%, 8% and 38%, respectively. More diversity of Bacillus species was found in rye flours than in white flours, Bacillus subtilis being the predominant species isolated from rye flour. B. cereus had an incidence of 50% in Port Salut Argentino cheeses. Meanwhile, B. pumilus was identified in both Port Salut and Quartirolo cheeses with an incidence of 50% and 25%, respectively. All the spices analysed showed Bacillus mycoides as the sole aerobic spore-forming bacilli isolated. The association of the presence of B. cereus, B. subtilis and Bacillus licheniformis with both the potential spoilage of foods and foodborne outbreaks is well known. In this study, Bacillus spp. had an incidence of 38% among all the samples analysed, therefore the monitoring of those species should be routinely done in microbiological food analyses.     

Droplet-based pyrosequencing using digital microfluidics

The feasibility of implementing pyrosequencing chemistry within droplets using electrowetting-based digital microfluidics is reported. An array of electrodes patterned on a printed-circuit board was used to control the formation, transportation, merging, mixing, and splitting of submicroliter-sized droplets contained within an oil-filled chamber. A three-enzyme pyrosequencing protocol was implemented in which individual droplets contained enzymes, deoxyribonucleotide triphosphates (dNTPs), and DNA templates. The DNA templates were anchored to magnetic beads which enabled them to be thoroughly washed between nucleotide additions. Reagents and protocols were optimized to maximize signal over background, linearity of response, cycle efficiency, and wash efficiency. As an initial demonstration of feasibility, a portion of a 229 bp Candida parapsilosis template was sequenced using both a de novo protocol and a resequencing protocol. The resequencing protocol generated over 60 bp of sequence with 100% sequence accuracy based on raw pyrogram levels. Excellent linearity was observed for all of the homopolymers (two, three, or four nucleotides) contained in the C. parapsilosis sequence. With improvements in microfluidic design it is expected that longer reads, higher throughput, and improved process integration (i.e., "sample-to-sequence" capability) could eventually be achieved using this low-cost platform.     

Variable-temperature Fourier transform near-infrared (FT-NIR) Imaging spectroscopy of the diffusion process of butanol(OD) into polyamide 11

Time-resolved Fourier transform near-infrared (FT-NIR) spectroscopic imaging was applied to the diffusion process of butanol(OD) into polyamide 11 (PA11) with a novel sheet-structured variable-temperature-controlled sample holder in order to demonstrate the significant differences of diffusion rate below and above the glass transition temperature of PA11. The diffusant butanol(OD) was chosen for two reasons: (1) it allows the diffusion front to be monitored by the intensity decrease of a NH-specific absorption band of PA11 due to the NH/ND isotope exchange and (2) under the measurement conditions the diffusion of butanol(OD) into PA11 takes place in an experimentally manageable time frame. Apart from the in situ visualization of the diffusion front in the time-resolved FT-NIR images, the type of diffusion and the diffusion coefficient of butanol(OD) into PA11 have been determined.