Phenolic compounds and antioxidant activity of extracts of Ginkgo leaves

The aim of the present study was to determine the flavonol contents of crude extracts from Ginkgo (Ginkgo biloba L.) leaves, their antioxidant properties in model system studies, and their inhibitory action of linoleic acid oxidation in an emulsion system and of triacylglycerols (TAG) in rapeseed oil. Extracts were prepared from both green and yellow leaves of Ginkgo trees using water, aqueous acetone, and ethanol. Extracts were analyzed by HPLC for their presence and content of selected flavonols; these included myricetin, quercetin, kaempferol, isorhamnetin, and morin. The highest level of flavonols, especially quercetin, myricetin and kaempferol, were found in the aqueous acetonic extracts. Crude extracts from yellow Ginkgo leaves contained greater amounts of flavonols. The best DPPH radical‐scavenging activity amongst the Ginkgo extracts examined was determined for aqueous acetonic extracts, while the lowest was noted for the ethanolic extract of green leaves. Water infusion extracts exhibited the highest iron(II) chelating activity. The reducing power of extracts from yellow leaves was 2 higher than that of crude extracts from green leaves. Nevertheless, extracts from green Ginkgo leaves imparted a greater protection factor against TAG oxidation, as assessed by the Rancimat method. Crude extracts from yellow Ginkgo leaves were more efficacious than green ones at inhibiting oxidation of the linoleic acid emulsion.     

A modified creep model of epoxy adhesive at ambient temperature

The paper presents the results of experimental investigations of the creep behavior of epoxy adhesive-hardened samples. The determined creep characteristics for an assumed range of tensile stresses show that the rheological effects in the examined adhesive have already occurred very distinctly at room temperature, for a relatively short time; moreover, the examined adhesive is a nonlinear viscoelastic medium and does not obey the Boltzmann's superposition principle. The obtained results of experimental investigations were subjected to detailed analysis and mathematical treatments. As a result of these actions, the so-called modified Burgers model has been finally developed for the studied adhesive with a constant modulus of elasticity for the non-relaxing part (describing the instant elastic strain) and variables, dependent on the tensile stress, the parameter values for its relaxing part (describing non-linearly viscoelastic properties of this adhesive). The creep deformations calculated for this model have demonstrated a very good consistency with the results of experimental investigations over the assumed range of stresses and the duration time of measurements.     

Comparison of Two Analytical Methods for Assessing Antioxidant Capacity of Rapeseed and Olive Oils

The oxygen radical absorbance capacity (ORAC) and the ferric reducing antioxidant power (FRAP) methods were used for the determination of antioxidant capacities (AC) of rapeseed oils at different steps of technological process and olive oils. The mean ORAC and FRAP results obtained for rapeseed oils (1,106–160 and 552–95.6 μmol TE/100 g) were higher than for olive oils (949–123 and 167–32.1 μmol TE/100 g). Although, FRAP values were lower than ORAC values for all studied oils, there is a linear and significant correlation between these two analytical methods (r = 0.9665 and 0.9298, P < 0.0005) for rapeseed and olive oils, respectively). Also, total phenolic compounds in rapeseed oils and olives correlated with antioxidant capacities (correlation coefficient ranged between 0.9470 and 0.8049). The refining process of rapeseed oils decreased the total phenolics content and antioxidant capacities by about 80%.     

A new generation of fibers from alginic acid for dressing materials

We developed and elaborated manufacturing conditions for the production of alginic acid fibers with high sorption properties. The fibers' tenacity obtained at a level of 16 cN/tex is suitable for textile processing these fibers, and will make it possible to produce a new generation of highly absorptive dressing materials. The presence of acid groups in the fiber‐forming material allows us to use them for the addition of new generation antibiotics, which makes it possible to extend the antibacterial effects of these fibers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Ca2+ and Mg2+ ions on the sintering and spectroscopic properties of cr-doped yttrium aluminum garnet ceramics

In this work, we investigated the effects of Ca²⁺ and Mg²⁺ ions and annealing temperature on the spectroscopic parameters of chromium-doped yttrium aluminum garnet ceramics (Cr:YAG). Samples were obtained with either a separate or a simultaneous addition of calcium and magnesium oxides. To achieve this, aqueous suspensions were prepared using Y₂O₃, Al₂O₃, Cr₂O₃, MgO, and CaO high-purity powders as raw materials. The obtained suspensions were freeze-granulated, pressed into pellets, debinded, and subjected to reactive sintering in vacuum at 1715°C for 6 h. Each material was annealed in air with temperatures between 1300 and 1700°C. Samples were also compared to Cr:YAG ceramics with the addition of silica as a sintering aid. All the materials obtained were then exposed to 445 nm excitation, and emission spectra in the visible and infrared wavelengths were recorded. The results showed that the emission spectra of Cr:YAG ceramics varied according to the annealing conditions: as-sintered samples exhibited strong emissions of around 680 nm and, after air annealing, of around 1400 nm. This phenomenon is attributed to the Cr³⁺→Cr⁴⁺ transition. Samples doped solely with MgO exhibited the highest emission intensity in the infrared region. Thus, Mg²⁺ ions provided the best conversion efficiency of chromium ions.     

Magnetic Resonance Signal Amplification by Reversible Exchange of Selective PyFALGEA Oligopeptide Ligands Towards Epidermal Growth Factor Receptors

The biorelevant PyFALGEA oligopeptide ligand, which is selective towards the epidermal growth factor receptor (EGFR), has been successfully employed as a substrate in magnetic resonance signal amplification by reversible exchange (SABRE) experiments. It is demonstrated that PyFALGEA and the iridium catalyst IMes form a PyFALGEA:IMes molecular complex. The interaction between PyFALGEA:IMes and H₂ results in a ternary SABRE complex. Selective 1D EXSY experiments reveal that this complex is labile, which is an essential condition for successful hyperpolarization by SABRE. Polarization transfer from parahydrogen to PyFALGEA is observed leading to significant enhancement of the ¹H NMR signals of PyFALGEA. Different iridium catalysts and peptides are inspected to discuss the influence of their molecular structures on the efficiency of hyperpolarization. It is observed that PyFALGEA oligopeptide hyperpolarization is more efficient when an iridium catalyst with a sterically less demanding NHC ligand system such as IMesBn is employed. Experiments with shorter analogues of PyFALGEA, that is, PyLGEA and PyEA, show that the bulky phenylalanine from the PyFALGEA oligopeptide causes steric hindrance in the SABRE complex, which hampers hyperpolarization with IMes. Finally, a single-scan ¹H NMR SABRE experiment of PyFALGEA with IMesBn revealed a unique pattern of NMR lines in the hydride region, which can be treated as a fingerprint of this important oligopeptide.     

Computer-Aided Search for 5-Arylideneimidazolone Anticancer Agents Able To Overcome ABCB1-Based Multidrug Resistance

ABCB1 modulation is an interesting strategy in the search for new anticancer agents that can overcome multidrug resistance (MDR). Hence, 17 new 5-arylideneimidazolones containing an amine moiety, as potential ABCB1 inhibitors, were designed, synthesized, and investigated. The series was tested in both parental (PAR) and multidrug-resistant (MDR) ABCB1-overexpressing T-lymphoma cancer cells using cytotoxicity assays. The ABCB1-modulating activity was examined in rhodamine 123 accumulation tests, followed by Pgp-Glo™ Assay to determine the influence of the most active compounds on ATPase activity. Lipophilic properties were assessed both, in silico and experimentally (RP-TLC). Pharmacophore-based molecular modelling toward ABCB1 modulation was performed. The studies allowed the identification of anticancer agents (p-fluorobenzylidene derivatives) more potent than doxorubicin, with highly selective action on MDR T-lymphoma cells (selectivity index >40). Most of the investigated compounds showed ABCB1-modulating action; in particular, two 5-benzyloxybenzylidene derivatives displayed activity nearly as strong as that of tariquidar.     

Correlation Between Cutting Data Selection and Chip Form in Stainless Steel Turning

This article presents investigations related to the turning of stainless steel as a representative of difficult-to-cut materials and the effectiveness of selected chip breakers working in the local machining environment. Martensitic steel AISI 416 was used to test two commercially available types of chip breaker. The efficiency of a chip breaker working in the range of cutting conditions recommended (by the tool manufacturers) was the aim of the turning tests. As a result of the investigations an algorithm of cutting condition selection, combining both the cutting tests and the simulation procedure for the efficiency of the chip breaker was created. The vision system, equipped with a high-speed camera was used for chip form estimation. Simultaneously, the cutting force components were measured to check if the simulation calculation was correct. The FEM simulation was applied to estimate the manner in which the chip groove was filled. The article presents certain recommendations for cutting condition correction in the local machining environment for the purpose of achieving an acceptable chip form.     

Properties of Light MMCs Modified with Cordierite Synthesized from Fly Ash

This paper presents novel opportunities for management of fly ash by synthesizing the material into cordierite ceramics and using it as a reinforcing phase for light metal alloys. Metal matrix composites (based on magnesium alloy and aluminum alloy) were produced by squeeze casting. The magnesium matrix composites with a suitably selected reinforcing phase content (2 wt.%) exhibited much better strength properties than the unmodified alloy (AM60). It was also demonstrated that the wettability (or the lack thereof) in the metal-ceramic system is critical to successful production of the composites based on the AK7 alloy with cordierite. Light alloy matrix composites reinforced with cordierite ceramics particles are innovative materials that combine high strength with low weight, which may be a key factor of merit for numerous applications of the composite in various branches of industries.