Neural network based controller for Cr–Fe batch reduction process

An automated pilot plant has been designed and commissioned to carry out online/real-time data acquisition and control for the Cr⁶⁺–Fe²⁺ reduction process. Simulated data from the Cr⁶⁺–Fe²⁺ model derived are validated with online data and laboratory analysis using ICP-AES analysis method. The distinctive trend or patterns exhibited in the ORP profiles for the non-equilibrium model derived have been utilized to train neural network-based controllers for the process. The implementation of this process control is to ensure sufficient Fe²⁺ solution is dosed into the wastewater sample in order to reduce all Cr⁶⁺–Cr³⁺. The neural network controller has been utilized to compare the capability of set-point tracking with a PID controller in this process. For this process neural network-based controller dosed in less Fe²⁺ solution compared to the PID controller which hence reduces wastage of chemicals. Industrial Cr⁶⁺ wastewater samples obtained from an electro-plating factory has also been tested on the pilot plant using the neural network-based controller to determine its effectiveness to control the reduction process for a real plant. The results indicate the proposed controller is capable of fully reducing the Cr⁶⁺–Cr³⁺ in the batch treatment process with minimal dosage of Fe²⁺.     

Selective determination of urea using urease immobilized on ZnO nanowires

Well-aligned zinc oxide (ZnO) nanowire arrays were fabricated on gold-coated plastic substrates using a low-temperature aqueous chemical growth (ACG) method. The ZnO nanowire arrays with 50–130 nm diameters and ∼1 μm in lengths were used in an enzyme-based urea sensor through immobilization of the enzyme urease that was found to be sensitive to urea concentrations from 0.1 mM to 100 mM. Two linear sensitivity regions were observed when the electrochemical responses (EMF) of the sensors were plotted vs. the logarithmic concentration range of urea from 0.1 mM to 100 mM. The proposed sensor showed a sensitivity of 52.8 mV/decade for 0.1–40 mM urea and a fast response time less than 4 s was achieved with good selectivity, reproducibility and negligible response to common interferents such as ascorbic acid and uric acid, glucose, K⁺ and Na⁺ ions.     

Power quality diagnosis using time frequency analysis and rule based techniques

Diagnosing a power quality disturbance means identifying the type and cause of the disturbance. Fast diagnosis of power quality disturbances is important so as to assist network operators in performing counter measures and implementing suitable power quality mitigation actions. In this study a novel method for performing power quality diagnosis is presented by using the S-transform and rule based classification techniques. The proposed power quality diagnosis method was evaluated for its functionality in detecting the type of short duration voltage disturbances and identifying the cause of the disturbances which may be due to permanent or non permanent faults. Based on the results, this new method has the potential to be used in the existing real time power quality monitoring system in Malaysia to expedite the diagnosis on the recorded voltage disturbances.     

From dynamic influence nets to dynamic Bayesian networks: A transformation algorithm

This paper presents an algorithm to transform a dynamic influence net (DIN) into a dynamic Bayesian network (DBN). The transformation aims to bring the best of both probabilistic reasoning paradigms. The advantages of DINs lie in their ability to represent causal and time‐varying information in a compact and easy‐to‐understand manner. They facilitate a system modeler in connecting a set of desired effects and a set of actionable events through a series of dynamically changing cause and effect relationships. The resultant probabilistic model is then used to analyze different courses of action in terms of their effectiveness to achieve the desired effect(s). The major drawback of DINs is their inability to incorporate evidence that arrive during the execution of a course of action (COA). Several belief‐updating algorithms, on the other hand, have been developed for DBNs that enable a system modeler to insert evidence in dynamic probabilistic models. Dynamic Bayesian networks, however, suffer from the intractability of knowledge acquisition. The presented transformation algorithm combines the advantages of both DINs and DBNs. It enables a system analyst to capture a complex situation using a DIN and pick the best (or close‐to‐best) COA that maximizes the likelihood of achieving the desired effect. During the execution, if evidence becomes available, the DIN is converted into an equivalent DBN and beliefs of other nodes in the network are updated. If required, the selected COA can be revised on the basis of the recently received evidence. The presented methodology is applicable in domains requiring strategic level decision making in highly complex situations, such as war games, real‐time strategy video games, and business simulation games. © 2009 Wiley Periodicals, Inc.     

Short-term and long-term memory analysis of learning using 2D and 3D educational contents

ABSTRACT

The effect of 2D and 3D educational content learning on memory has been studied using electroencephalography (EEG) brain signal. A hypothesis is set that the 3D materials are better than the 2D materials for learning and memory recall. To test the hypothesis, we proposed a classification system that will predict true or false recall for short-term memory (STM) and long-term memory (LTM) after learning by either 2D or 3D educational contents. For this purpose, EEG brain signals are recorded during learning and testing; the signals are then analysed in the time domain using different types of features in various frequency bands. The features are then fed into a support vector machine (SVM)-based classifier. The experimental results indicate that the learning and memory recall using 2D and 3D contents do not have significant differences for both the STM and the LTM.     

Crystal dislocation in SEM with image processing

Image processing algorithm is implemented to detect the grain boundary of the crystal using (SEM) Scanning Electron Microscopy. This paper presents a method for edge-detection in color image based on Sobel, Canny operator’s algorithm and discrete wavelet transform. The performance of these methods is effective and faster. Filtering is another approach to clear the noise of an image. Scanning Electron Microscopy (SEM) used to inspect semiconductor materials and devices for several decades, continues to increase in importance. Removal of noise is an important step in the image restoration process, but de-noising of the image has remained a challenging problem in recent research associated with image process. De-noising is used to remove the noise from corrupted images, while retaining the edges and other detailed features too are an essential part of de-noising.     

Mobile-cloud assisted framework for selective encryption of medical images with steganography for resource-constrained devices

In this paper, the problem of outsourcing the selective encryption of a medical image to cloud by resource-constrained devices such as smart phone is addressed, without revealing the cover image to cloud using steganography. In the proposed framework, the region of interest of the medical image is first detected using a visual saliency model. The detected important data is then embedded in a host image, producing a stego image which is outsourced to cloud for encryption. The cloud which has powerful resources, encrypts the image and sent back the encrypted marked image to the client. The client can then extract the selectively encrypted region of interest and can combine it with the region of non-interest to form a selectively encrypted image, which can be sent to medical specialists and healthcare centers. Experimental results and analysis validate the effectiveness of the proposed framework in terms of security, image quality, and computational complexity and verify its applicability in remote patient monitoring centers.     

Probabilistic assessment of loss in revenue generation in demand-driven production

In Demand-driven Production with Just-in-Time inputs, there are several sources of uncertainty which impact on the manufacturer??s ability to meet the required customer??s demand within the given time frame. This can result in a loss of revenue and customers, which will have undesirable impacts on the financial aspects and on the viability of the manufacturer. Hence, a key concern for manufacturers in just-in-time production is to determine whether they can meet a specific level of demand within a given time frame, to meet the customers?? orders and also to achieve the required revenue target for that period of time. In this paper, we propose a methodology by which a manufacturer can ascertain the probability of not meeting the required demand within a given period by considering the uncertainties in the availability of production units and raw materials, and the loss of financial revenue that it would experience as a result.