In this work, a low temperature aqueous chemical growth methodology was used for the fabrication of CuO nanostructures. The as-synthesised nanostructures were then elaborately characterised by number of analytical techniques such as scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). The obtained nanostructures were observed to possess interlaced rice-shaped structural features with the length and width of individual rice determined to be in the range of 200–300 nm and 50–100 nm respectively. The unique nanostructures when utilised as electrode material exhibited excellent electro-catalytic potential towards oxidation of hydrazine in alkaline media. The excellent conductive of CuO added by the high surface area of obtained nanorice-like structures enabled development of highly sensitive (3087 µA mM−1 cm−2), selective and stable electrochemical sensor for hydrazine. In addition, the successfully application of the developed sensor in spiked tap, bottled and industrial water samples for the detection of hydrazine suggested its feasibility for practical environmental application.
The properties of the surface films formed on Ti and its Ti–5Al–4V and Ti–6Al–3.5Fe alloys by chemical (immersion in 10 M NaOH) and thermal treatment (500 °C) were studied in this paper. Their corrosion behaviour in Ringer solution was investigated. After treatments, the sample microhardness was measured. Also, the sample surfaces were observed by an optical microscope before and after immersion in Ringer solutions. The electrochemical behaviour of the surface films obtained by the chemical and thermal treatments was studied using the methods of the electrochemical impedance spectroscopy (EIS) and monitoring of open circuit potentials at different immersion periods (up to 60 days) in Ringer solution. Microhardness increased with the increasing loads for the studied materials, showing the existence of a compact protective layer. Microscopic observations exhibited more compact coatings after 60 days of exposure in Ringer solution, due to the formation of an apatite layer. EIS spectra revealed surface films with two layers: an inner, barrier protective layer and an outer, porous apatite layer. The impedance increases in time denoting that the films have grown by apatite nucleation. Also, EIS spectra showed that the complex treatment by chemical + heat method is the most efficiently. For the samples treated by the two processes (chemical + heat) the values of the open circuit potentials are nobler than of the chemical treated samples, denoting better protective, bioactive films. 相似文献
This work reports the application of banana peel as a novel bioadsorbent for in vitro removal of five mycotoxins (aflatoxins (AFB1, AFB2, AFG1, AFG2) and ochratoxin A). The effect of operational parameters including initial pH, adsorbent dose, contact time and temperature were studied in batch adsorption experiments. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pHpzc) analysis were used to characterise the adsorbent material. Aflatoxins’ adsorption equilibrium was achieved in 15 min, with highest adsorption at alkaline pH (6–8), while ochratoxin has not shown any significant adsorption due to surface charge repulsion. The experimental equilibrium data were tested by Langmuir, Freundlich and Hill isotherms. The Langmuir isotherm was found to be the best fitted model for aflatoxins, and the maximum monolayer coverage (Q0) was determined to be 8.4, 9.5, 0.4 and 1.1 ng mg?1 for AFB1, AFB2, AFG1 and AFG2 respectively. Thermodynamic parameters including changes in free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the four aflatoxins. Free energy change and enthalpy change demonstrated that the adsorption process was exothermic and spontaneous. Adsorption and desorption study at different pH further demonstrated that the sorption of toxins was strong enough to sustain pH changes that would be experienced in the gastrointestinal tract. This study suggests that biosorption of aflatoxins by dried banana peel may be an effective low-cost decontamination method for incorporation in animal feed diets. 相似文献
Chitosan and polyethylene glycol (PEG-600) membranes were synthesized and crosslinked with 3-aminopropyltriethoxysilane (APTES). The main purpose of this research work is to synthesize RO membranes which can be used to provide desalinated water for drinking, industrial and agricultural purposes. Hydrogen bonding between chitosan and PEG was confirmed by displacement of the hydroxyl absorption peak at 3237 cm−1 in pure chitosan to lower values in crosslinked membranes by using FTIR. Dynamic mechanical analysis revealed that PEG lowers Tg of the modified membranes vs. pure chitosan from 128.5 °C in control to 120 °C in CS-PEG5. SEM results highlighted porous and anisotropic structure of crosslinked membranes. As the amount of PEG was increased, hydrophilicity of membranes was increased and water absorption increased up to a maximum of 67.34%. Permeation data showed that flux and salt rejection value of the modified membranes was increased up to a maximum of 80% and 40.4%, respectively. Modified films have antibacterial properties against Escherichia coli as compared to control membranes. 相似文献
Multimedia Tools and Applications - In the recent digitization era, image hashing is a key technology, including image recognition, authentication and manipulation detection, among many multimedia... 相似文献
Developing only Fe derived bifunctional overall water splitting electrocatalyst both for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) while performing at low onset overpotential and with high catalytic stability is a rare instance. We present here the first demonstration of unique iron-oxide nanobeads (FeOx-NBs) based electrocatalyst executing both OER and HER with high activity. Thin-film electrocatalytic FeOx-NBs assembly is surface grown via simple spray coating (SC). The unique SC/FeOx-NBs propels OER initiating water oxidation just at 1.49 VRHE (η = 260 mV) that is the lowest observable onset potential for OER on simple Fe-oxide based catalytic films reported so far. Catalyst also reveals decently high HER activity and competent overall water splitting performance in the FeOx-NBs two-electrode system as well. Catalyst also presents stable kinetics, with promising high electrochemically active surface area (ECSA) of 1765 cm2, notable Tafel slopes of just 54 mV dec1? (OER) and 85 mV dec1? (HER), high exchange current density of 1.10 mA cm2? (OER), 0.58 mA cm2? (HER) and TOF of 74.29s1?@1.58VRHE, 262s1?@1.62VRHE (OER) and 82.5s1?@-0.45VRHE, 681s1?@-0.56VRHE (HER). 相似文献
ABSTRACTWe present a theoretical model to realize the symmetric and asymmetric diffraction grating in a four-level atomic medium. The proposed atomic medium follows a double lambda configuration where four fields interact with it. We get control over symmetric and asymmetric behavior of the diffraction grating by manipulating the relative phase of the fields. Interestingly, the symmetric and asymmetric diffraction grating become prominent when the vortex beam is used instead of the plane wave. Enhanced first, second, and third-order diffraction gratings are achieved via the vortex beam. Further, we find control over asymmetric diffraction gratings by the relative phase of the fields. Coherent control of asymmetric diffraction grating in negative and positive diffracted angles is also achieved via the relative phase. 相似文献