Chemical reactions in crosslinking of copolymers of ethylene and vinyltrimethoxy silane

The crosslinking reactions of a new type of polyethylene, an ethylene vinyltrimethoxy silane (EVS) copolymer, when reacted with water has been studied. Samples of EVS were treated in water at 90°C. The kinetics of the crosslinking was followed by measuring the gel content and by determination of the content of different structures (? Si? OCH₃,? Si? OH, and ? Si? O? Si? ) using FT-IR. The observations show that a maximum gel content of 70-75% is obtained after 25 h treatment in water at 90°C. On the other hand, the absorption index for the crosslinks, ? Si? O? Si? , continues to increase until about 100 h, i.e., more crosslinks seem to be formed without a simultaneous increase in gel content. Mechanical measurements showed decreased elongation at break even after very long treatments. Thermo-oxidative degradation is, however, also responsible for the change in mechanical properties. For properly stabilized samples, the decrease in elongation leveled off after about 100 h of treatment. This indicates that the crosslinks formed after 25 h mainly should be within the already existing gel. The observed synergistic effect of crosslinking and thermo-oxidative degradation emphasizes the importance of a proper stabilizing system.     

Microbial-Catalyzed Biotransformation of Multifunctional Triterpenoids Derived from Phytonutrients

Microbial-catalyzed biotransformations have considerable potential for the generation of an enormous variety of structurally diversified organic compounds, especially natural products with complex structures like triterpenoids. They offer efficient and economical ways to produce semi-synthetic analogues and novel lead molecules. Microorganisms such as bacteria and fungi could catalyze chemo-, regio- and stereospecific hydroxylations of diverse triterpenoid substrates that are extremely difficult to produce by chemical routes. During recent years, considerable research has been performed on the microbial transformation of bioactive triterpenoids, in order to obtain biologically active molecules with diverse structures features. This article reviews the microbial modifications of tetranortriterpenoids, tetracyclic triterpenoids and pentacyclic triterpenoids.     

Effect of atomic layer deposition temperature on the performance of top-down ZnO nanowire transistors

This paper studies the effect of atomic layer deposition (ALD) temperature on the performance of top-down ZnO nanowire transistors. Electrical characteristics are presented for 10-μm ZnO nanowire field-effect transistors (FETs) and for deposition temperatures in the range 120°C to 210°C. Well-behaved transistor output characteristics are obtained for all deposition temperatures. It is shown that the maximum field-effect mobility occurs for an ALD temperature of 190°C. This maximum field-effect mobility corresponds with a maximum Hall effect bulk mobility and with a ZnO film that is stoichiometric. The optimized transistors have a field-effect mobility of 10 cm²/V.s, which is approximately ten times higher than can typically be achieved in thin-film amorphous silicon transistors. Furthermore, simulations indicate that the drain current and field-effect mobility extraction are limited by the contact resistance. When the effects of contact resistance are de-embedded, a field-effect mobility of 129 cm²/V.s is obtained. This excellent result demonstrates the promise of top-down ZnO nanowire technology for a wide variety of applications such as high-performance thin-film electronics, flexible electronics, and biosensing.     

Magnetic Properties of Mechanically Alloyed Cobalt-Zinc Ferrite Nanoparticles

In this work, the physical and the magnetic properties of cobalt-zinc ferrite nanoparticles, synthesized via high-energy ball milling (HEBM), were examined. X-Ray diffraction (XRD), field emission scanning electron microscopy (FeSEM), and scanning transmission electron microscopy (STEM) were used to study changes of the powder structure and morphology analyses. Hysteresis and permeability measurement were carried out using a BH hysteresisgraph system and an impedance analyzer, respectively. The results suggested improved magnetic properties of Co_0.5Zn_0.5Fe₂O₄ with increasing sintering temperature from 950 °C up to 1200 °C. However, the variations of the magnetic responses were consistent with the varying volume concentration of the ferrite composites. Unlike the highly crystalline pure ferrite which showed magnetic resonance within the measured frequency, the crystallineamorphous composites showed no visible resonance peak. This proved that the resonance peak shifted to higher frequency as a result of the single domain spin behavior in the absence of domain walls movement.     

Dental Composites with Magnesium Doped Zinc Oxide Nanoparticles Prevent Secondary Caries in the Alloxan-Induced Diabetic Model

Antibacterial restorative materials against caries-causing bacteria are highly preferred among high-risk patients, such as the elderly, and patients with metabolic diseases such as diabetes. This study aimed to enhance the antibacterial potential of resin composite with Magnesium-doped Zinc oxide (Mg-doped ZnO) nanoparticles (NPs) and to look for their effectiveness in the alloxan-induced diabetic model. Hexagonal Mg-doped ZnO NPs (22.3 nm diameter) were synthesized by co-precipitation method and characterized through ultraviolet-visible (UV-Vis), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analysis. The Mg-doped ZnO NPs (1, 2.5 and 5% w/w) were then evaluated for antibacterial activity using a closed system in vitro biofilm model. Significant enhancement in the antibacterial properties was observed in composites with 1% Mg-doped ZnO compared to composites with bare ZnO reinforced NPs (Streptococcus mutans, p = 0.0005; Enterococcus faecalis, p = 0.0074, Saliva microcosm, p < 0.0001; Diabetic Saliva microcosm, p < 0.0001). At 1–2.5% Mg-doped ZnO NPs concentration, compressive strength and biocompatibility of composites were not affected. The pH buffering effect was also achieved at these concentrations, hence not allowing optimal conditions for the anaerobic bacteria to grow. Furthermore, composites with Mg-doped ZnO prevented secondary caries formation in the secondary caries model of alloxan-induced diabetes. Therefore, Mg-doped ZnO NPs are highly recommended as an antibacterial agent for resin composites to avoid biofilm and subsequent secondary caries formation in high-risk patients.     

Silk Fibroin as an Efficient Biomaterial for Drug Delivery,Gene Therapy,and Wound Healing

Silk fibroin (SF), an organic material obtained from the cocoons of a silkworm Bombyx mori, is used in several applications and has a proven track record in biomedicine owing to its superior compatibility with the human body, superb mechanical characteristics, and its controllable propensity to decay. Due to its robust biocompatibility, less immunogenic, non-toxic, non-carcinogenic, and biodegradable properties, it has been widely used in biological and biomedical fields, including wound healing. The key strategies for building diverse SF-based drug delivery systems are discussed in this review, as well as the most recent ways for developing functionalized SF for controlled or redirected medicines, gene therapy, and wound healing. Understanding the features of SF and the various ways to manipulate its physicochemical and mechanical properties enables the development of more effective drug delivery devices. Drugs are encapsulated in SF-based drug delivery systems to extend their shelf life and control their release, allowing them to travel further across the bloodstream and thus extend their range of operation. Furthermore, due to their tunable properties, SF-based drug delivery systems open up new possibilities for drug delivery, gene therapy, and wound healing.     

Effect of epitaxial realignment on the leakage behavior of arsenic-implanted,as-deposited polycrystalline Si-on-single crystal Si diodes

When dopants are indiffused from a heavily implanted polycrystalline silicon film deposited on a silicon substrate, high thermal budget annealing can cause the interfacial “native” oxide at the polycrystalline silicon-single crystal silicon interface to break up into oxide clusters, causing epitaxial realignment of the polycrystalline silicon layer with respect to the silicon substrate. Anomalous transient enhanced diffusion occurs during epitaxial realignment and this has adverse effects on the leakage characteristics of the shallow junctions formed in the silicon substrate using this technique. The degradation in the leakage current is mainly due to increased generation-recombination in the depletion region because of defect injection from the interface.     

Recovering Internet service sessions from operating system failures

Current Internet service architectures lack support for salvaging stateful client sessions when the underlying operating system fails due to hangs, crashes, deadlocks, or panics. The backdoors (BD) system is designed to detect such failures and recover service sessions in clusters of Internet servers by extracting lightweight state associated with client service sessions from server memory. The BD architecture combines hardware and software mechanisms to enable accurate monitoring and remote healing actions, even in the presence of failures that render a system unavailable.