An Enzymatic Assay Method for Bacterial Alpha-amylase Using a Glucose Determination-kit and Maltohexaose as the Substrate

Using maltohexaose G₆ as a substrate, a convenient analytical method for amylase-catalyzed hydrolytic reaction was developed by application of an enzymatic assay-kit (glucose oxidase-peroxidase) to measurement of glucose, produced on the reaction: G₆→G₅ + G. The initial velocity was confirmed to be proportional to the initial concentration of amylase, examined, ∼ 100 μm. The new method was found in a good correlation with the Nelson and Somogyi method. Rate assay was also examined: The initial velocity is proportional to the enzyme concentration, ∼ 30 μm. Hence, this enzymatic assay method is recognized to be convenient and useful for the measurement of α-amylase.     

Inhibition in a microgravity environment of the recovery of Escherichia coli cells damaged by heavy ion beams during the NASDA ISS phase I program of NASA Shuttle/Mir mission no. 6

OBJECTIVE: To explore whether there are different disease patterns of rheumatoid arthritis (RA) in women and men. METHODS: We studied 55 male case patients and 110 female control patients who developed RA between 1970 and 1985 and who resided and received medical care in Olmsted County, Minnesota, for at least 10 years after the diagnosis of RA. Case and control patients were matched for the date of first diagnosis. The pattern and extent of joint involvement, the frequency of joint surgeries, and the presence and type of extraarticular manifestations were determined by retrospective chart review. RESULTS: Incidence rates in women were variable and age dependent, whereas the risk in men older than 36 years was constant over their lifetime. Erosive disease was more frequent in men than in women (72% versus 55%, respectively; P < 0.05) and tended to occur earlier (47% versus 31% for erosive disease within the first 4 years of RA). Although male sex was correlated with a higher risk of bony erosions and an accelerated course of RA, structural consequences of joint destruction were more pronounced in women. Joint surgery was performed more frequently in women (50%) than in men (27%) (P = 0.01). In particular, the frequencies of arthroplasties and arthrodeses of hand and foot joints were different (34 procedures in women versus 1 procedure in men; P < 0.001). Sex influenced the risk as well as the pattern of organ involvement in RA. Nodules and rheumatoid lung disease were typical manifestations in men (P = 0.001 and P < 0.001, respectively), whereas women typically developed sicca syndrome (P = 0.05). Despite differences in disease aggressiveness and disease pattern, there was little difference in the medical therapy in the men compared with the women. CONCLUSION: RA is a heterogeneous disease with variations in phenotype. Sex-associated factors influence disease severity as well as disease pattern. Because sex-related effects influence treatment goals, treatment responses, and side effects, they should be considered in clinical study design and analysis as well as in the treatment decisions for individual patients with RA.     

User's requests (from a practitioner's perspective)

As a practitioner, I have to rely on outside clinical laboratories and affiliated hospitals to perform laboratory tests. In this abstract, I describe specific problems I have encountered with third-party laboratories, and propose solutions for these problems to optimize use of laboratory tests. BLOOD TESTS: The most frequent problem in ordering blood tests is the lack of detailed information regarding sampling conditions. I often have to call laboratories to check whether the sample should be serum or plasma, what volume is needed, whether the sample should be cooled, etc. I propose that clinical laboratories should provide practitioners' manuals that describe specific sampling information. ULTRASONOGRAPHY: Most laboratories do not keep the data from ultrasonographic tests. The lack of these is most problematic when test results are interpreted differently by laboratories and by practitioners. Retaining the data would also help private laboratories improve the quality of the test by enabling them to compare their interpretations with others'. ANNUAL MEDICAL SCREENING: Even if an abnormal finding is detected at medical screening clinics, the final diagnosis is usually not sent back to the screening facilities. This is highly recommended to establish an official system that mediates the feedback to screening centers. MRI: Due to miscommunication between practitioners and radiologists, the test is sometimes performed inappropriately. A thorough consultation should occur before the test to clarify specific goals for each patient. PATHOLOGICAL TESTS: Interpretation of results is often inconsistent among laboratories. Independent clinical laboratories tend to report results without indicating sample problems, while pathology departments at affiliated hospitals tend to emphasize sample problems instead of diagnosis or suggesting ways to improve sample quality. Mutual communication among laboratories would help standardize the quality of pathological tests.     

Modification of bismaleimide resin by poly(propylene phthalate), poly(butylene phthalate) and related (co)polyesters

Aromatic polyesters were prepared and used to decrease the brittleness of the bismaleimide resin composed of 4,4′-bismaleimidediphenyl methane (BMI) and o,o′-diallyl bisphenol A (DBA) (Matrimid 5292 resin). The aromatic polyesters included poly(propylene phthalate) (PPP), poly(2,2-dimethylpropylene phthalate) (PDPP), poly(butylene phthalate) (PBP) and poly(butylene phthalate-co-butylene terephthalate) (50mol% terephthalate unit) (PBPT). The polyesters were effective modifiers for decreasing the brittleness of the bismaleimide resin. For example, inclusion of 20wt% PPP (MW 18700) led to 50% increase in the fracture toughness (K_IC) with retention of flexural properties and a slight loss of the glass transition temperature, compared with the mechanical and thermal properties of the unmodified cured bismaleimide resin. Micro-structures of the modified resins were examined by scanning electron microscopy and dynamic viscoelastic analysis. The thermal stability of the modified resins was slightly lower than that of the unmodified resin as determined by thermogravimetric analysis. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified bismaleimide resin system. © 1998 SCI.     

High-Performance Induction Motor Drive System Using a PWM Inverter

A high-performance speed control system for cage induction motors is described which utilizes a PWM inverter. The effects of primary current coincidence and machine constant variation on system characteristics such as response time, torque precision, and operating noise were investigated. Based on the results obtained, new control methods have been devised; one varies the gain of the current controller in proportion to the primary frequency, and a second compensates for the slip frequency by using the deviation between the flux reference value and the actual value. Effectiveness of the compensation methods was confirmed in tests.     

Direct synthesis and melt‐drawing property of aramids by bulk polycondensation of isophthalic acid with m‐phenylenediamine and 3,4′‐oxydianiline

The direct polycondensation of isophthalic acid with a mixture of 1,3‐phenylenediamine (m‐PDA) and 3,4′‐diaminodiphenyl ether (3,4′‐ODA) could be successfully performed in the bulk to afford the expected co‐aramids for the first time. The co‐aramids with low molecular weights and 3,4′‐ODA contents higher than 50 mol% display excellent thermoplasticity and melt‐drawing property. Indeed, several meters long filaments with 12 μm diameter could be produced. In addition, the environmentally friendly method for the preparation of aramid materials as well as the demonstration of their filament formation will open up the new possibility to prepare aramid fibers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Non-catalytic vanadium removal from vanadyl etioporphyrin (VO-EP) using a mixed solvent of supercritical water and toluene: A kinetic study

Reaction kinetics and mechanisms of the decomposition of vanadyl etioporphyrin (VO-EP), the most common metal compounds present in heavy crude, were studied in a mixed solvent of supercritical water (SCW) and toluene without the addition of any catalyst, H₂ or H₂S to remove vanadium. The aim of this study was to remove vanadium an environmentally benign way from VO-EP at a high extent and in a short reaction time. The experiments were conducted in an 8.8 mL batch reactor fabricated from Hastelloy C-276. The capability of SCW to remove vanadium from VO-EP was discovered at temperatures of 410–490 °C and a water partial pressure (WPP) of 25 MPa. Experimental results revealed that the overall VO-EP conversion was 90.51% at a temperature of 490 °C, WPP of 25 MPa and reaction time of 180 min. Under the same reaction conditions, approximately 80.26% vanadium was removed by reaction with SCW. The global reaction followed first order kinetics, with Arrhenius parameters of activation energy 8.93 kcal/mol and a pre-exponential factor 5.66 s^?1. A kinetic model of demetallation that well-fit the experimental results, was proposed. The reaction kinetics may be critically explained in terms of free radical mechanism. The obtained results suggest that SCW is capable of removing vanadium from VO-EP.     

Novel Heneicosadienoic and Tricosadienoic Acid Isomers in Ovaries of Marine Archaeogastropods

To investigate unusual odd-chain fatty acids (FA) from gonads of archaeogastropods, limpets Cellana grata and Cellana toreuma, a subfraction enriched in FA with two double bonds extracted from the gonads was obtained by using argentation thin-layer chromatography. The resulting fraction was analyzed by using capillary gas chromatography-mass spectrometry of its methyl esters, 3-pyridylcarbinol esters and pyrrolidide derivatives. Six novel all-cis diene isomers were identified as 7,18-heneicosadienoic (21:2Δ7,18), 8,14-tricosadienoic (23:2Δ8,14), 9,15-tricosadienoic (23:2Δ9,15), 7,18-tricosadienoic (23:2Δ7,18), 9,18-tricosadienoic (23:2Δ9,18), and 9,20-tricosadienoic (23:2Δ9,20) acids. In the present study, the differences in the proportion of tricosadienoic acid isomers between the ovary lipids of C. grata and C. toreuma were recognized.