Letter

¹⁵N variable contact time (VCT) cross polarization magic angle spinning (CPMAS) NMR experiments were employed to investigate the reaction products formed in wood composites bonded with ¹⁵N-enriched polymeric diphenylmethane diisocyanate (PMDI)-based adhesives. Two wood species were studied. Aspen (Populus tremuloides) and Southern Pine (Pinus sylvestris). The influence of temperature and wood moisture content on the distribution of PMDI-derived species are presented and discussed.     

Formulation development and optimization of alpha ketoglutarate nanoparticles for cyanide poisoning

The purpose of this research work was to formulate and evaluate alpha ketoglutarate nanoparticles as dry powder inhaler for treatment of cyanide poisoning. Non-polymeric particles were prepared by nano-precipitation technique using various stabilizers. Selection of co-solvent and stabilizer was a key to produce stabilized particles. A combination of lutrol F68 and PVA as a crystal growth inhibitor seems to be best in achieving minimum particle size of 110.2 nm. On the basis of preliminary trials a Box-Behnken statistical design was employed to study the effect of independent variables, drug concentration (X₁), stirring speed (X₂), stirring time (X₃), PVA concentration (X₄), poloxomer concentration (X₅) and volume of co-solvent (X₆) on average particle size. Particle size varied from 110 to 875 nm depending upon the significant terms. Optimized formulation was predicted at drug concentration (50 μg/ml), stirring speed (640 rpm), stirring time (1 min), PVA concentration (1%), poloxomer concentration (1.69%) and volume of co-solvent (30 ml) with 104.6% experimental validity. The nanosized particles were further characterized by X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC), Nuclear Magnetic Resonance (NMR) and Fourier Transform Infrared Spectroscopy (FT-IR) analysis. The results of particle characterization indicate that there was no physical disparity when compared with the commercial α-KG sample.     

Semianalytical Model for Drawdown due to Pumping a Partially Penetrating Large Diameter Well

A semianalytical model is developed for computing drawdowns in and around a partially penetrating large diameter well. The new model can take into account an unsteady pumping discharge and thus drawdowns during recovery can be computed. This model can also yield the unsteady contributions from well and aquifer storages to the pumped discharge. While developing the model, the flow from the bottom of the well is also accounted.     

Analysis of fly ash heavy metal content and disposal in three thermal power plants in India

The study investigates the heavy metal content of fly ash and bottom ash from three major power plants in North India, using flame atomic absorption spectrometry. It also studies the prevalent disposal methods used at these sites. The ashes were analysed for the presence of Cr, Mn, Pb, Zn, Cu, Ni and Co and detectable levels of all were found in both fly ash and bottom ash. The concentrations of Cr and Zn were highest while Co concentration was less. The wet disposal method is used in two of the power plants (site 1 and site 3). Neither of the sites uses ash pond lining in the construction of the ash ponds, hence leaching of the heavy metals is possible. Site 2 has adopted 100% dry disposal system which allows better utilization but incurs additional costs. Better management practices, increased utilization and proper disposal practices need to be undertaken to minimize the adverse environmental impact.     

The Classroom of the Future: An Internet‐Delivered National Course on Thermal Management of Electronics

Teaching inter‐disciplinary material poses special challenges due to the diversity of student backgrounds. This problem is compounded if the material being taught is intended for both undergraduate and graduate students. Mechanical Engineering faculty members from three universities have come together to address this problem using a layered, multimedia delivery mechanism via the Internet. This has resulted in the first‐ever, live, full‐duplex, Internet course taught at any of the three partner universities: Auburn University, the University of Maryland, and the University of Minnesota. With the addition of colleagues from industrial sites such as Philips in the Netherlands and three other universities in Japan, Singapore, and Australia, the next offering will expand to become an international course. The authors hope to illustrate that a course delivered over the Internet adds significantly to the learning process in a cost‐effective manner .     

Functionalized polystyrene latex particles as substrates for ATRP: Surface and colloidal characterization

In this work, the process for producing polystyrene particles surface functionalized with a thin shell of ATRP initiator polymerized alone or along with styrene and a crosslinker, is presented. Copolymerization of styrene and acrylic end-capped ATRP initiator to generate a thin shell on the fully polymerized core particles suffered from secondary nucleation owing to their possible incompatibility with the core particles and their own colloidal stability. One step functionalization processes, where the shell forming monomers are added directly to the 70% polymerized core particles, lead to significant changes in the resulting particle morphologies. The shot addition of these monomers led to a very uniform surface morphology without any secondary nucleation owing to quick coalescence of the secondary particles on the soft surface of the seed particles. Addition of crosslinker to the system helped in effectively eliminating the smaller particles generated due to secondary nucleation along with the chemical networking.     

Models for minimum explosible concentration of organic dust clouds handled in industries

Dust explosion hazard exists in plants and facilities wherever combustible dusts are hardled. Minimum explosible concentration of dust clouds is an important factor requiring special attention for hazard evaluation if any technological equipment is to be protected by inertisation. The mathematical models available for prediction of this parameter have been analysed for their application to organic dust clouds. Solution of the most general mode for determination of minimum explosible concentration of dust clouds proposed by Mitsui and Tanaka is presented, together with the comparison with experimental data. It has been found that the model is not successful in predicting the minimum explosible concentration for organic dusts. Recommendations on requirement of development of a new model for prediction of minimum explosible concentration of an organic dust such as polyethylen have been given.