Dodecylhydroxydiphosphonic Acid for Solvent Extraction

Abstract

The extraction behavior of Zn(II) and Cu(II) in acetate media has been investigated using dodecylhydroxydiphosphonic acid, DHDPA, which was previously synthesized and characterized. The extraction of both cations was carried out in different media with the addition of CH₃COOH, HCl or H₂SO₄ at different pH. The maximum extraction yield of 80% for zinc, was obtained in one step after the addition of sulfuric acid at pH_i=5.5 and for copper after the addition of 10 mg of sodium acetate. The authors plan additional tests using polar solvents.     

An Innovative Tree Gradient Boosting Method Based Image Object detection from a Uniform Background Scene

Object detection is a wide area problem domain in the field of computer and machine vision. Complex background adds challenge and error margin as well to the problem significantly lot algorithms for object detection are hard to comply with occlusion and pixel bending moment affect. In this paper a highly robust algorithm ORBTRIAN for a less resolution image has been proposed and implemented using ORB detection with gradient boosting machine learning algorithm. The work has been compared with Adaboost and Surf based technology. The analysis shows 3.8% increase in performance of earlier model. The feature points extracted from ORB method are further processed to reduce the processing further. Only those points are selected which are triangularly farthest from centroid of it and only 1 point of feature selected. Thus the result is around 28%, much faster than earlier computation. The tree based GB has been implemented in this algorithm. With more number of feature points more classes need to be recognized and hence the computations performed is required an unreasonable amount of effort and time. So some nearby classes are assigned at same level using our algorithm to reduce the number of tree nodes. Overall performance of the proposed algorithm shows a significant increase in efficiency in computation time.     

Spin injection in n-type resonant tunneling diodes

We have studied the polarized resolved photoluminescence of n-type GaAs/AlAs/GaAlAs resonant tunneling diodes under magnetic field parallel to the tunnel current. Under resonant tunneling conditions, we have observed two emission lines attributed to neutral (X) and negatively charged excitons (X⁻). We have observed a voltage-controlled circular polarization degree from the quantum well emission for both lines, with values up to −88% at 15 T at low voltages which are ascribed to an efficient spin injection from the 2D gases formed at the accumulation layers.     

Rippled and Helical MoS<Subscript>2</Subscript> Nanowire Catalysts: An Aberration Corrected STEM Study

Abstract  

Aberration corrected (C_s) scanning transmission electron microscopy (STEM) has been used for the first time to characterize MoS₂ catalysts (supported on Al₂O₃ substrates) to provide detailed information of its shape and structure. The high-resolution imaging reveals unprecedented morphologies present in the MoS₂ catalyst that have never been observed before with other experimental techniques because of the insufficient image contrast and/or resolution. High angle annular dark field (HAADF)-STEM images shows very clearly that the catalyst is formed by elongated chains with a twisted and helical structure. Based on the HAADF-STEM images, we built three atomic models to illustrate the different morphologies found in the MoS₂ catalyst. The existence of these nanostructures opens the posibility for novel catalyticaly active edge morphologies in MoS₂-based nanocatalysts.     

Synthesis of Sulfonated Carbon Nanocage and Its Performance as Solid Acid Catalyst

Abstract  

A carbon nanocage material (CKT) was first successfully sulfonated by introducing sulfophenyl groups on the surface of pore channels through benzenesulfonic acid-containing aryl radical in situ generated from the reaction of 4-aminobenzenesulfonic acid and isoamyl nitrite in water. The sulfonated carbon nanocage material (S-CKT) was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, powder small-angle X-ray diffraction and nitrogen sorption measurements. The results showed that the S-CKT still possess the high specific surface area (787 m²/g) and uniform mesoporous (pore diameter 4.7 nm) structures, although the structure of S-CKT is slightly disorder, compared with its unsulfonated precursor. S-CKT, as a carbon-based solid acid catalyst, showed good catalytic performance and reusability in the cross-Aldol condensation of ketones with aromatic aldehydes under solvent-free condition.     

Nanosized Mn(acac)<Subscript>3</Subscript> Anchored on Amino Functionalized Silica for the Selective Oxidative Synthesis of 2-arylbenzimidazoles, 2-arylbenzothiazoles and Aerobic Oxidation of Benzoins in Water

Abstract  

Silica functionalized Mn(acac)₃ was prepared and employed for the one-pot oxidative synthesis of 2-arylbenzimidazoles, 2-arylbenzothiazoles; and oxidation of benzoins to benzils under air atmosphere using water as the reaction medium. Environmentally friendly procedure, chemoselectivity and excellent yields are main advantages of this procedure. In all the cases, the catalyst was found to be highly active and selective; passes hot filtration test successfully; and could be recycled several times with a slight loss of activity.     

Selective Oxidation of Glycerol Catalyzed by Rh/Activated Carbon: Importance of Support Surface Chemistry

Abstract  

Noble metal catalysts (Pt, Ir, Pd, Rh, Au) supported on activated carbon were assessed for glycerol oxidation. Rhodium is a highly efficient catalyst when the support has neutral or basic properties. The surface chemistry of activated carbon plays a key role in the performance.     

Gas-phase Photocatalytic Oxidation of Acrylonitrile on Sulphated TiO<Subscript>2</Subscript>: Continuous Flow and Transient Study

Abstract  

The gaseous products of photocatalytic oxidation (PCO) of acrylonitrile on sulphated P25 in concentrations from 10 to 100 ppm at 60 to 130 °C were CO₂, HCN and HNCO. This photocatalyst showed disproportionally improved performance at higher temperature and longer retention times. The temperature-programmed oxidation (TPO) after PCO disclosed possible reaction routes.     

Hyperbranched poly (amine-ester)-poly(ε-caprolactone) copolymer and their nanoparticles as camptothecin delivery system

A new amphiphilic hyperbranched poly (amine-ester)-poly(ε-caprolactone) copolymer (HPAE-co-PCL) was synthesized by ring-opening polymerization of ε-caprolactone and branched poly (amine-ester) (HPAE-OHs) with Sn(Oct)₂ as catalyst. The chemical structures of copolymers were determined by FT-IR, ¹H-NMR (¹³C-NMR), thermo gravimetric analysis apparatus (TGA) and differential scanning calorimetry (DSC). Camptothecin (CPT)-loaded copolymer nanoparticles were prepared by the oil-in water (o/w) emulsion technique method. Their physicochemical characteristics, e.g. morphology and nanoparticles size distribution were then evaluated by means of fluorescence spectroscopy, environmental scanning electron microscopy (ESEM), and dynamic light scattering (DLS). CPT-loaded nanoparticles assumed a spherical shape and have unimodal size distribution. It was found that the chemical composition of the nanoparticles was a key factor in controlling nanoparticles size, drug-loading content, and drug release behavior. As the molar ratio of ε-caprolactone to HPAE increased, the nanoparticles size and drug-loading content increased, and the drug release rate decreased. The antitumor activity of the CPT-loaded HPAE-co-PCL nanoparticles against human hepatoma HEPG2 cells was evaluated by 3-(4, 5-Dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) method. The CPT-loaded HPAE-co-PCL nanoparticles showed comparable anticancer efficacy with the free drug.