A note on spark bubble drop-on-demand droplet generation: simulation and experiment

The fluid dynamics of the spark bubble-generated droplet is studied both experimentally and numerically. The emphasis is especially on the droplet behavior after pinch-off. Commercial inkjet printers often produce satellite droplets along with parent droplets which are not desirable from the viewpoint of printing efficiency. Furthermore, standard drop-on-demand droplet generators are normally restricted to the generation of droplets with the same size as the nozzle diameter. In the spark bubble droplet generation method, a spark-generated bubble induces droplet formation through a hole in a solid surface separating the liquid and air interfaces. Immediately after ignition occurs, a bubble forms and creates pressure waves as it expands and contracts in a nonsymmetrical fashion. These pressure waves, depending on the geometries of the bubble location, plate, and hole may cause a single droplet smaller than the plate aperture to form and break up. In this article, a combined numerical and experimental study has been conducted to investigate the droplet behavior created in this manner. A high-speed camera is utilized to capture the droplet formation process. The numerical simulations have been carried out using the boundary integral spatial solution coupled with the time integration, i.e., a mixed Eulerian–Lagrangian approach. There is reasonable agreement between the simulations and experiment.     

Numerical investigation of the mechanism behind the deflagration to detonation transition in homogeneous and inhomogeneous mixtures of H2-air in an obstructed channel

The accidental release of hydrogen into enclosures can result in a flammable mixture with concentration gradients and possible deflagration-to-detonation transition (DDT). This numerical study aims to investigate the effect of obstacle spacing and mixture concentration on the DDT in a homogeneous and inhomogeneous hydrogen-air mixture. The paper focuses on the mechanisms behind the DDT in two mixtures with an average hydrogen concentration of 15% and 30%. Unlike the near-stoichiometric mixture, in the lean mixture, DDT only occurs in the inhomogeneous mixture. Depending on obstacle spacing, three different regimes of DDT were observed in the near-stoichiometric inhomogeneous mixture: i) Detonation was ignited when a strong Mach stem formed and propagated between the obstacles; ii) two explosion centers appeared when incident shock and Mach stem reflected from upper and lower obstacles, respectively; iii) Mach stem did not form but DDT occurred behind the flame front at the top of the obstacle.     

A strategic planning model for natural gas transmission networks

The design and development of natural gas transmission pipeline networks are multidisciplinary problems that require various engineering knowledge. In this problem, the type, location, and installation schedule of major physical components of a network including pipelines and compressor stations are decided upon over a planning horizon with least cost goal and subject to network constraints. Practically, this problem has been viewed as a conceptual design case and not as an optimization problem that tries to select the best design option among a set of possible solutions. Consequently, conceptual design approaches are usually suboptimal and work only for short-run development planning. We propose an integrated nonlinear optimization model for this problem. This model provides the best development plans for an existing network over a long-run planning horizon with least discounted operating and capital costs. A heuristic random search optimization method is also developed to solve the model. We show the application of the model through a simple case study and discuss how non-economic objectives may also be incorporated into model.     

The Effect of Injection Angle on Mixing and Flame Holding in Supersonic Combustor

IntroductionMixing of fuel with oxidizer and their combustionare encountered in many engineering applicationsincluding hypersonic propulsion system in space vehicles.Particularly, the fuel injection scheme in hypersonicvehicles incorporating Scramet (Supersonic CombustionRamjet) engines, requires special attention for efficientmixing and stable combustion. Though a considerablenumber of researches has been cwhed out on ndxing andcombustion of fuel with oxidizer in Scramet program,still it fa…     

Three Dimensional Separation with Spiral—Focus in a Decelerating Duct Flow （Effect of Asymmetric Inlet Boundary Layer Thickness）

An experimental apparatus was developed to study the three dimensional separated flow with spiral-foci. The internal decelerating flow was generated by the air suction from a side wall to produce the separation on an opposite-side wall. The relation between the upstream boundary layer and the generation of spiral-foci in the separation region was observed by a tuft method. As a result, it was clarified that the spiral-focus type separation could be produced on the side wall and its behavior was closely related to the vortices supplied into the separation region from the boundary layer developing along top wall or bottom one.     

Numerical Investigation of Kinetic Energy and Surface Energy of Wavy Falling Liquid Film

Numerical simulations have been carried out for two-dimensional wavy falling liquid film in order to investigatekinetic energy and surface energy of that liquid film.Governing equations,which are continuity equation,Na-vier-Stokes equation,and equations of interfacial boundary conditions including surface movement and effect ofsurface tension,have been solved directly by means of a numerical scheme based on the finite difference method.In most cases,periodic disturbances superimposed at inflow boundary grow to fully developed waves which re-tain the given periodic behavior.In some cases,however,random waves appear after the fully developed waves.Variations of kinetic energy and surface energy of the periodically developed waves and the random waves havebeen discussed.     

The potential for greenhouse gases mitigation in household sector of Iran: cases of price reform/efficiency improvement and scenario for 2000–2010

Iran's demographic profile is sharply youth oriented and this upcoming generation's needs for employment and housing, coupled with low-energy efficiency vectors and consumption patterns, has created a constant rise in energy demand and greenhouse gas (GHGs) emissions in the residential sector. Improved energy efficiency as a national policy lynchpin for demand reduction and GHGs mitigation, has become commonplace. OPEC countries however, Iran included, suffer an obvious lack of consumer incentive because of low fuel prices. This study evaluates the twin impacts of price reform and efficiency programs on energy carriers’ consumption and GHGs mitigation in the Iranian housing sector. For this purpose, the demand functions for energy carriers, has been developed by econometrics process models.     

Weighted indices for evaluating the quality of research with multiple authorship

Devising an index to measure the quality of research is a challenging task. In this paper, we propose a set of indices to evaluate the quality of research produced by an author. Our indices utilize a policy that assigns the weights to multiple authors of a paper. We have considered two weight assignment policies: positionally weighted and equally weighted. We propose two classes of weighted indices: weighted h-indices and weighted citation h-cuts. Further, we compare our weighted h-indices with the original h-index for a selected set of authors. As opposed to h-index, our weighted h-indices take into account the weighted contributions of individual authors in multi-authored papers, and may serve as an improvement over h-index. The other class of weighted indices that we call weighted citation h-cuts take into account the number of citations that are in excess of those required to compute the index, and may serve as a supplement to h-index or its variants.     

Measurement of the magnetic fields of high-voltage substations (230 kV) in Tehran (Iran) and comparison with the ACGIH threshold limit values

Measurements were made according to IEEE standard 644-1994 at a height of 1 m above floor level. It is concluded that none of the measurements exceeded the ACGIH threshold limit value. Among all control rooms the highest measured density amount is 0.69 μT in the control room of Ozgol substation and the lowest is 0.2 μT in the post of Shahid Firouzi. The control room of Ozgol substation is located in the second floor and bus-bars are located at a short distance from the window on the east, and so the highest recorded magnetic field is measured in this control room. Among all switchgear parts the highest amount 9.15 μT is measured in Kan substation. None of the measurements exceeded the ACGIH threshold limit value.