Mathematical Modeling of a Simulated Moving‐Bed Adsorption Process: Parex™ Technology as a Case Study

A simplified dynamic mathematical model for a simulated moving‐bed adsorption process is presented. The model is adopted to simulate the separation process of p‐xylene from the other 8‐carbon aromatics by means of the Parex^? technology. Operating conditions and the moving‐bed structure for a commercial plant were used and the performance of the unit was simulated. The model results are in good agreement with the findings of similar existing studies. Comparison of the results of this simplified model with those obtained by other researches indicates a considerable decrease in central processing unit (CPU) time.     

Copper (I) ion stabilized on fe3o4‐core ethylated branched polyethyleneimine‐shell as magnetically recyclable catalyst for ATRP reaction

Branched polyethyleneimine (bPEI) was used to modify the surface of Fe₃O₄ nanoparticles coated with silica layer, and then, it was treated with ethyl iodide to prepare Fe₃O₄@SiO₂@Ethylated‐bPEI. In the next step, the yolk–shell structure was gained by selectively etching the SiO₂ middle layer. Finally, copper(I) was introduced to the yolk–shell Fe₃O₄@Ethylated‐bPEI and the activity of the catalyst was evaluated for atom transfer radical polymerization (ATRP) of styrene, led to obtain the well‐defined polymer with relatively low polydispersity. The toxicity of the residual copper in the polymer product was a limiting issue for applicability of ATRP reactions especially for biological purposes. In this report, the copper content in the polymer was reduced to the excellent value of 1.1 ppm. Moreover, the magnetic isolation, recyclability, and remove the need for an external ligand were other advantages of the synthesized catalyst which makes it suitable for employing in ATRP reactions. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42337.     

Nanomechanical and tribological behavior of hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposites for biomedical applications

A hydroxyapatite (HA) particulate reinforced ultrahigh molecular weight polyethylene (UHMWPE) nanocomposite is fabricated by internal mixer at 180°C and using of paraffin oil as a processing aid to overcome the high viscosity of melted UHMWPE. The reinforcing effects of nano‐HA are investigated on nanomechanical properties of HA/UHMWPE nanocomposites by nanoindentation and nanoscratching methods. Results show that the nanocomposite with 50 wt % nano‐HA exhibits a Young's modulus and hardness of 362.5% and 200% higher, and a friction coefficient of 38.86% lower than that of pure UHMWPE, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42052.     

Stabilizing silica nanoparticles in high saline water by using polyvinylpyrrolidone for reduction of asphaltene precipitation damage under dynamic condition

In this study, the performance of stable nanofluid containing SiO_2 nanoparticles dispersed and stabilized in high salinity brine for asphaltene inhibition in dynamic condition is evaluated. In the first stage of this work, the stability of silica nanoparticles in different range of water salinity(0–100000 mg·L~(-1)) is investigated. Next, stable nanofluid containing highest salinity is selected as asphaltene inhibitor agent to inject into the damaged core sample. The estimated values of oil recovery for base case, after damage process and after inhibition of asphaltene precipitation using nanofluid are 51.6%, 36.1% and 46.7%, respectively. The results showed the reduction in core damage after using nanofluid. In addition, the relative permeability curves are plotted for the base case, after damage process and also after inhibition of asphaltene precipitation using nanofluid. Comparison of relative permeability curves shows, relative permeability of oil phase decreased after damage process as compared with the base case. But after using nanofluid the oil relative permeability curve has shifted to the right and effective permeability of oil phase has been improved.     

Numerical study of n-heptane/benzene separation by thermal diffusion column

In this article,numerical simulations are performed to investigate the performance of the thermal diffusion column for the separation of n-heptane/benzene mixture.The present work tried to optimize column by analyzing significant parameters such as feed flow rate,temperature and cut.In order to obtain the hydrodynamic and temperature and mass distribution inside thermal diffusion column,computational fluid dynamic(CFD) method is applied to solve the Navier-Stocks equations.Numerical simulations are conducted to study the main parameters in both stationary and time-dependent conditions.By using the separation work unit as a function of cut,the optimal cut for maximum SWU occurs within a limited range of 0.47-0.5 for feed rate between 0.5 and 4 g min-1.Our findings reveal that the optimum feed rate in the range of optimum cut is about 1 g min~(-1).In transient study,results show that the best cut for reaching to steady-state condition is θ=0.5.     

Effects of discrete source-sink arrangements on mixed convection in a square cavity filled by nanofluid

Laminar mixed convection of Al₂O₃/water nanofluid flow in a cavity in which the upper wall is moving from right to left has been studied numerically. Fifteen different arrangements of two discrete sources and four discrete sinks have been considered. This work shows when one source is located at the right side of the bottom wall and other one at the down half of the left wall, total heat transfer achieves its maximum value. The lowest heat transfer rate is achieved when more than two vortexes are created in the cavity (case 13 for Ri=1 and case 5 for Ri=100). In general, for cases with one overall vortex, the cavities which have separate sources induce better cooling and have higher Nu number.     

Biosorption of thorium from aqueous solution by Ca-pretreated brown algae Cystoseira indica

The potential use of a biosorbent, Cystoseira indica, obtained from the Persian Gulf was investigated for the removal of Th (IV) ions from aqueous solutions by considering equilibrium, kinetic and thermodynamic aspects. The FT-IR spectra of unloaded and Th-loaded biomass indicated various functionalities on the biomass surface including hydroxyl, amide and carboxyl groups, which are responsible for the binding of thorium ions. Th (IV) uptake by C. indica was pH dependent. An increase in biosorbent dosage up to 1 g/L caused an increase in the Th (IV) percentage removal. Biosorption process at all studied initial Th (IV) ion concentrations follows the pseudo-second order kinetic model. The biosorption data could be well described by Redlich-Peterson isotherm in comparison to Langmuir and Freundlich isotherms. The maximum sorption capacity of Th (IV) by Langmuir isotherm was estimated to be 169.49 mg/g at 45 °C with pH of 3. The thermodynamic parameters indicated the biosorption of Th on the biomass was a feasible, spontaneous and endothermic process. Th sorption capacity remained unaffected or slightly affected (<10% inhibition) in the presence of several interfering ions such as uranium (VI), nickel (II) and copper (II). The reusability of the biomass was also determined after five sorption-desorption cycles.     

Heterogeneous photocatalytic degradation of 4-chlorophenol by immobilization of cobalt tetrasulphophthalocyanine onto MCM-41

The photocatalytic activity of cobalt tetrasulphophthalocyanine immobilized onto MCM-41 was investigated for photocatalytic degradation of 4-chlorophenol (4-CP) in aqueous solutions. Immobilization of cobalt tetrasulphophthalocyanine complex to the walls of MCM-41 was performed by pre-anchorage of 3-(aminopropyl)-triethoxysilane (APTES) onto MCM-41 via post-synthesis method. X-ray diffraction, nitrogen physisorption, diffuse reflectance spectroscopy, energy-dispersive X-ray and FT-IR methods were used to characterize the product. Photocatalytic efficiency of the prepared photocatalyst for degradation of 4-CP was tested under illumination of UV-A and visible light. The reaction intermediates were identified by gas chromatography-mass spectrometry (GC-MS) technique.     

Direct synthesis of bi-modal porous structure MCM-41 and its application in CO2 capturing through amine-grafting

A bi-modal porous structure MCM-41 (BPS-MCM-41) was synthesized and functionalized by 3-[2-(2-Aminoethylamino)ethylamino]propyltrimethoxysilane (TRI); also, its performance in amine grafting and CO₂ capturing was compared with that of pore-expanded MCM-41 [1]. To create larger pores beside the mesoporous structure of MCM-41, carbon black nanoparticles were used as the solid template. Characterizing the BPS-MCM-41 using the BET and BJH techniques resulted in the surface reduction of 29.3 percent and volume increase of 68.46 percent. The pore size distribution showed two peaks: a narrow peak at 2.24 nm diameter, which belonged to micelles, and a wide one at about 50 nm due to the presence of used nanoparticles. The functionalization confirmed that BPS-MCM-41 is capable of accommodating a large quantity of amine groups. The CO₂ adsorption measurement indicated that internal volume of the adsorbent was a critical factor affecting the adsorption capacity of the amine grafted adsorbents.     

Potential Development of Value-Added Fishery Products in Underutilized and Commercial Fish Species: Comparative Study of Lipid Quality Indicators

In this study, proximate and fatty acid composition in the edible flesh of eight underutilized and five commercial freshwater fish species were compared in order to evaluate the potential of these fish for development of functional value-added fishery products. The lipid content (% dry weight basis) of investigated fish species ranged from 3.44 to 9.25 in underutilized and 3.73–7.68 in commercial species. In comparison with underutilized fish species, commercial species had higher levels of protein (P < 0.05). The high proportion of EPA+DHA was found with Goldfish (524 mg/100 g flesh), Wels (422 mg/100 g flesh), and Crucian carp (354 mg/100 g flesh), all of which belonged to underutilized group. All studied fish (save Lenkoran) showed values higher than the minimum recommended DHA/EPA value (0.45). The ratios of n-6/n-3 found in this study were much lower (save Goatfish) than those cited as a harmful value (4.0 as the maximum value). The PUFA/SFA value of the present fish samples was higher at 1.57 for Goatfish, 1.02 for Lenkoran, 0.68 for Wels, all of these fish belonging to the underutilized group. The highest atherogenic and thrombogenicity index values were generally obtained for commercial species. It seems in respect of comparability of these lipid quality indicators, the underutilized fish species could be highly recommended as an important source of polyunsaturated fatty acids and Max-EPA products for humans consumption.