Yellow–Orange Electroluminescence of Novel Tin Complexes

Novel tin complexes were synthesized for use as fluorescent materials in organic light-emitting diodes (OLEDs). The structures of these complexes were characterized by ultraviolet–visible, Fourier-transform infrared, and nuclear magnetic resonance spectroscopy methods and elemental analyses. The energy levels of the tin complexes were determined using cyclic voltammetry measurements. Devices were fabricated with an indium tin oxide (ITO)/PEDOT:PSS (90 nm)/PVK:PBD:tin complexes (75 nm)/Al (180 nm) structure; the resultant devices had peak emissions ranging from 537 nm to 580 nm. The tin complexes accounted for 8 wt.% of the blend in the PVK:PBD (100:40), which was used as a host. The electroluminescent spectra of the tin complexes were red-shifted as compared with the PVK:PBD blend. We believe that the electroluminescence performance of OLED devices based on tin complexes relies on overlaps between the absorption of the tin compounds and the emission of PVK:PBD.     

Design of high-speed two-stage cascode-compensated operational amplifiers based on settling time and open-loop parameters

Settling behavior of operational amplifiers is of great importance in many applications. In this paper, an efficient methodology for the design of high-speed two-stage operational amplifiers based on settling time is proposed. Concerning the application of the operational amplifier, it specifies proper open-loop circuit parameters to obtain the desired settling time and closed-loop stability. As the effect of transfer function zeros has been taken into account, the proposed methodology becomes more accurate in achieving the desired specifications. Simulation results are presented to show the effectiveness of the methodology.     

A theoretical discussion on the foundation of Stone??s blind source separation

This paper discusses the theoretical foundation of Stone’s BSS (Stone in Neural Comput 13:1559–1574, 2001; Stone in Independent Component Analysis: A Tutorial Introduction, A Bradford Book, London, 2004), and it proposes a novel BSS approach based on second-order statistics of the responses of two different linear filters to source signals. The proposed approach which includes Stone’s BSS as a special case helps us to understand how generalized eigenvalue decomposition (GEVD) concludes separating vectors in Stone’s BSS. It obtains the separating vectors by simultaneous diagonalization of covariance matrices of two different linear filters responses to the mixtures. The two employed linear filters are selected dependent on source signals structures under the assumption that they have different responses to source signals. Here, two FIR filters with coefficients selected in an opposite probabilistic way have been suggested for the proposed BSS. The proposed BSS method has been compared with Stone’s BSS, SOBI and AMUSE over speech and image mixtures in different noise levels.     

Telesurgery QoS improvement over SDN based on a Type‐2 fuzzy system and enhanced cuckoo optimization algorithm

Telemedicine is a new area based on the information and communication technology for collecting, storing, organizing, retrieving and exchanging medical information. One of the most important applications of telemedicine is indeed telesurgery in which an efficient telecommunication infrastructure between the surgery room and remote surgeons need to be established. One of the most important issues to be tackled in telesurgery is to find favorable links for routing as well as providing high Quality of Service (QoS). In this paper, an efficient model based on the hybridization of Type‐2 Fuzzy System (T2FS) and Cuckoo Optimization Algorithm (COA) over the Software Defined Networks (SDN) is proposed in order to achieve optimal and reliable routes for telesurgery application. Using T2FS, the fitness of the links is determined; then, a COA is conducted over the Constraint Shortest Path (CSP) problem to find the best routes. Delay is considered as a CSP problem which is satisfied by trying to find the paths with minimum cost. Due to the NP‐completeness of the CSP problem, an Enhanced COA (so‐called E‐COA) is proposed and utilized as a metaheuristic solver. To the best of our knowledge, this paper is the first SDN‐based communication model that applies both T2FS and E‐COA for assigning proper costs to the network's links, and solves the consequence CSP problem according to the QoS requirement for telesurgery. The model also recognizes and preserves the second‐best routes in order to keep the reliability for such a critical application. In addition to the simulations, the performance evaluation is also conducted on a real experimental scenario. Many comparisons are carried out between the proposed model and other conventional methods, and the evaluation study shows the superiority of the proposed model on all the three QoS‐related metrics, i.e. average end‐to‐end delay, packet loss ratio and PSNR.     

Synergistic Roll‐to‐Roll Transfer and Doping of CVD‐Graphene Using Parylene for Ambient‐Stable and Ultra‐Lightweight Photovoltaics

A roll‐to‐roll (R2R) transfer technique is employed to improve the electrical properties of transferred graphene on flexible substrates using parylene as an interfacial layer. A layer of parylene is deposited on graphene/copper (Cu) foils grown by chemical vapor deposition and are laminated onto ethylene vinyl acetate (EVA)/poly(ethylene terephthalate). Then, the samples are delaminated from the Cu using an electrochemical transfer process, resulting in flexible and conductive substrates with sheet resistances of below 300 Ω sq^?1, which is significantly better (fourfold) than the sample transferred by R2R without parylene (1200 Ω sq^?1). The characterization results indicate that parylene C and D dope graphene due to the presence of chlorine atoms in their structure, resulting in higher carrier density and thus lower sheet resistance. Density functional theory calculations reveal that the binding energy between parylene and graphene is stronger than that of EVA and graphene, which may lead to less tear in graphene during the R2R transfer. Finally, organic solar cells are fabricated on the ultrathin and flexible parylene/graphene substrates and an ultra‐lightweight device is achieved with a power conversion efficiency of 5.86%. Additionally, the device shows a high power per weight of 6.46 W g^?1 with superior air stability.     

DSKMS: a dynamic smart key management system based on fuzzy logic in wireless sensor networks

Wireless Networks - Wireless sensor networks include a large number of sensor nodes which are developed in an environment. These networks have military, commercial, industrial, and medical...     

A Novel UWB Pulse Shape Modulation System

In this paper novel modified Hermite polynomial functions for use in impulse radio (ultra-wideband) communications are proposed. With these functions pulse shapes which are orthogonal and have nearly constant pulse width regardless of the pulse order are generated. These properties hold under the effects of differentiation. An M-ary communication system is constructed using these pulse shapes. A Matlab model for generating the pulses is designed and the effect of timing jitter on the performance of the system is investigated by computer simulation.     

Robust Recursive Inverse Adaptive Algorithm in Impulsive Noise

The recently proposed Recursive Inverse (RI) algorithm has shown a significant performance improvement compared to that of the Recursive Least Squares (RLS) algorithm, in various noise environments. However, both algorithms fail to converge in certain impulsive noise environments, especially if the Signal-to-Noise Ratio (SNR) is low. In this paper, a Robust RI algorithm is proposed. Analytical results show that robustness against impulsive noise is achieved by choosing the weights on the basis of the L ₁ norms of the autocorrelation matrix and the cross-correlation vector. Simulation results confirm that the proposed algorithm provides an improved performance, with a reduction in computational complexity, compared to those of the RLS and the Robust RLS in white and correlated impulsive noise.     

Coplanar Waveguide Fed Printed Antenna with Compact Size for Broadband Wireless Applications

A novel and simple coplanar waveguide fed compact antenna is introduced in this paper. The antenna structure combines the advantages of CPW with those of the broadband antenna and simplifies the structure of the antenna by reducing the number of metallization level to construct uni-planar antenna. Prototype of the proposed antenna have been constructed and studied experimentally. The measured results agrees well with the simulated prediction and shows a broad bandwidth of 6 GHz ranging from 3.5 GHz to 9.5 GHz with VSWR ≤2 (return loss ≤−10 dB), which is equivalent to 92.3% impedance bandwidth centered at 6.5 GHz. The proposed antenna shows stable radiation characteristics, gain and axial ratio of less than 1 dB over the whole operating bandwidth. Furthermore, an extensive parametric study was performed to realize the relationship between the resonance frequencies of the broadband antennas and different parameters which is helpful for advancement of the antenna design.     

Fabrication of Sub‐10 nm Metallic Lines of Low Line‐Width Roughness by Hydrogen Reduction of Patterned Metal–Organic Materials

The fabrication of very narrow metal lines by the lift‐off technique, especially below sub‐10 nm, is challenging due to thinner resist requirements in order to achieve the lithographic resolution. At such small length scales, when the grain size becomes comparable with the line‐width, the built‐in stress in the metal film can cause a break to occur at a grain boundary. Moreover, the line‐width roughness (LWR) from the patterned resist can result in deposited metal lines with a very high LWR, leading to an adverse change in device characteristics. Here a new approach that is not based on the lift‐off technique but rather on low temperature hydrogen reduction of electron‐beam patterned metal naphthenates is demonstrated. This not only enables the fabrication of sub‐10 nm metal lines of good integrity, but also of low LWR, below the limit of 3.2 nm discussed in the International Technology Roadmap for Semiconductors. Using this method, sub‐10 nm nickel wires are obtained by reducing patterned nickel naphthenate lines in a hydrogen‐rich atmosphere at 500 °C for 1 h. The LWR (i.e., 3 σ_LWR) of these nickel nanolines was found to be 2.9 nm. The technique is general and is likely to be suitable for fabrication of nanostructures of most commonly used metals (and their alloys), such as iron, cobalt, nickel, copper, tungsten, molybdenum, and so on, from their respective metal–organic compounds.