The Einstein relation for degenerate semiconductors with nonuniformband structures

Modification of the Einstein equation for semiconductors with nonparabolic energy bands and doped nonuniformly with impurity atoms is suggested. The suggestion is based on a new approximation of the Fermi-Dirac integral of order 1/2, namely, F_1/2(η_n), where η_n is the reduced Fermi level for electrons. The relation reduces to that for semiconductors with parabolic energy bands and doped uniformly with impurity atoms under appropriate boundary conditions. A comparison of the calculated and exact results for F_1/2(η) is found to be very encouraging     

Arbitrary dual-band unequal Wilkinson power divider based on negative refractive index transmission lines

This paper focused on the application of negative refractive index transmission line (NRI-TL) in dual-band unequal Wilkinson power divider (WPD) with controllable frequency and power dividing ratio. Theory and design procedure of the dual-band NRI-TL are presented in details. For demonstration, two dual-band unequal Wilkinson power dividers (WPDs) with power dividing ratio of 2 : 1 and operating frequencies of 0.9 and 1.8 GHz are designed, fabricated and tested. The first unequal divider is based on 2-stage NRI-TLs and the second one is based on 4-stage NRI-TLs. In addition, these two types of NRI-TLs are presented to demonstrate that by increasing the number of NRI-TL unit-cells the phase response of the NRI-TLs converge to the desired characteristic. The good agreement between measured and simulated results confirmed the design concept and derived closed-form design equations. Measurements show that the first divider has 18.37% and 21.86% relative bandwidths and the second one has 33.52% and 29.12% relative bandwidths at 0.9 and 1.8 GHz, respectively. The design concept of this paper can be extended to equal dual-band power dividers with arbitrary frequency ratio.     

Interpolation techniques for building a continuous map from discrete wireless sensor network data

Wireless sensor networks (WSNs) typically gather data at a discrete number of locations. However, it is desirable to be able to design applications and reason about the data in more abstract forms than in points of data. By bestowing the ability to predict inter‐node values upon the network, it is proposed that it will become possible to build applications that are unaware of the concrete reality of sparse data. This interpolation capability is realised as a service of the network. In this paper, the ‘map’ style of presentation has been identified as a suitable sense data visualisation format. Although map generation is essentially a problem of interpolation between points, a new WSN service, called the map generation service, which is based on a Shepard interpolation method, is presented. A modified Shepard method that aims to deal with the special characteristics of WSNs is proposed. It requires small storage, can be localised and integrates the information about the application domain to further reduce the map generation cost and improve the mapping accuracy. Empirical analysis has shown that the map generation service is an accurate, a flexible and an efficient method. Copyright © 2011 John Wiley & Sons, Ltd.     

Yellow–Orange Electroluminescence of Novel Tin Complexes

Novel tin complexes were synthesized for use as fluorescent materials in organic light-emitting diodes (OLEDs). The structures of these complexes were characterized by ultraviolet–visible, Fourier-transform infrared, and nuclear magnetic resonance spectroscopy methods and elemental analyses. The energy levels of the tin complexes were determined using cyclic voltammetry measurements. Devices were fabricated with an indium tin oxide (ITO)/PEDOT:PSS (90 nm)/PVK:PBD:tin complexes (75 nm)/Al (180 nm) structure; the resultant devices had peak emissions ranging from 537 nm to 580 nm. The tin complexes accounted for 8 wt.% of the blend in the PVK:PBD (100:40), which was used as a host. The electroluminescent spectra of the tin complexes were red-shifted as compared with the PVK:PBD blend. We believe that the electroluminescence performance of OLED devices based on tin complexes relies on overlaps between the absorption of the tin compounds and the emission of PVK:PBD.     

A Fast Recursive Algorithm and Architecture for Pruned Bit-reversal Interleavers

In this paper, pruned bit-reversal permutations employed in variable-length interleavers and their associated fast pruning algorithms and architectures are considered. Pruning permutations is mathematically formulated as a counting problem in a set of k integers and any subset of $\alpha $ consecutive integers under some permutation, where integers from this subset that map into indices less than some $\beta <k$ are to be counted. A solution to this problem using sums involving integer floors and related functions is proposed. It is shown that these sums can be evaluated recursively using integer operations. Specifically, a mathematical treatment for bit-reversal permutations (BRPs) and their permutation statistics are presented. These permutations have been mainly addressed using numerical techniques in the literature to speed up in-place computations of fast Fourier and related transforms. Closed-form expressions for BRP statistics including inversions, serial correlations, and a new statistic called permutation inliers that characterizes the pruning gap of pruned interleavers, are derived. Using the inliers statistic, a recursive algorithm that computes the minimum number of inliers in a pruned BR interleaver (PBRI) in logarithmic time complexity is presented. This algorithm enables parallelizing a serial PBRI algorithm by any desired parallelism factor by computing the pruning gap in lookahead rather than a serial fashion, resulting in significant reduction in interleaving latency and memory overhead. Extensions to 2-D block and stream interleavers are also presented. Moreover, efficient hardware architectures for the proposed algorithms employing simple logic gates are presented. Simulation results of interleavers employed in modern communication standards demonstrate 3 to 4 orders of magnitude improvement in interleaving time compared to existing approaches.     

Hybrid cascode feedforward compensation for nano-scale low-power ultra-area-efficient three-stage amplifiers

A modified frequency compensation technique is proposed for low-power area-efficient three-stage amplifiers driving medium to large capacitive loads. Coined hybrid cascode feedforward compensation (HCFC), the total compensation capacitor is divided and shared between two internal high-speed feedback loops instead of only one loop as is common in prior art. Detailed analysis of this technique shows significant improvement in terms of bandwidth and stability. This is verified for a 1.2-V amplifier driving a 500-pF capacitive load in 90-nm CMOS technology, where HCFC reduces the total capacitor size and improves the gain-bandwidth by at least 30% and 40% respectively, compared to the prevailing schemes.     

Gas Diffusion,Energy Transport,and Thermal Accommodation in Single‐Walled Carbon Nanotube Aerogels

The thermal conductivity of gas‐permeated single‐walled carbon nanotube (SWCNT) aerogel (8 kg m^?3 density, 0.0061 volume fraction) is measured experimentally and modeled using mesoscale and atomistic simulations. Despite the high thermal conductivity of isolated SWCNTs, the thermal conductivity of the evacuated aerogel is 0.025 ± 0.010 W m^?1 K^?1 at a temperature of 300 K. This very low value is a result of the high porosity and the low interface thermal conductance at the tube–tube junctions (estimated as 12 pW K^?1). Thermal conductivity measurements and analysis of the gas‐permeated aerogel (H₂, He, Ne, N₂, and Ar) show that gas molecules transport energy over length scales hundreds of times larger than the diameters of the pores in the aerogel. It is hypothesized that inefficient energy exchange between gas molecules and SWCNTs gives the permeating molecules a memory of their prior collisions. Low gas‐SWCNT accommodation coefficients predicted by molecular dynamics simulations support this hypothesis. Amplified energy transport length scales resulting from low gas accommodation are a general feature of CNT‐based nanoporous materials.     

Efficient Computation Offloading Decision in Mobile Cloud Computing over 5G Network

Due to the significant advancement of Smartphone technology, the applications targeted for these devices are getting more and more complex and demanding of high power and resources. Mobile cloud computing (MCC) allows the Smart phones to perform these highly demanding tasks with the help of powerful cloud servers. However, to decide whether a given part of an application is cost-effective to execute in local mobile device or in the cloud server is a difficult problem in MCC. It is due to the trade-off between saving energy consumption while maintaining the strict latency requirements of applications. Currently, 5th generation mobile network (5G) is getting much attention, which can support increased network capacity, high data rate and low latency and can pave the way for solving the computation offloading problem in MCC. In this paper, we design an intelligent computation offloading system that takes tradeoff decisions for code offloading from a mobile device to cloud server over the 5G network. We develop a metric for tradeoff decision making that can maximize energy saving while maintain strict latency requirements of user applications in the 5G system. We evaluate the performances of the proposed system in a test-bed implementation, and the results show that it outperforms the state-of-the-art methods in terms of accuracy, computation and energy saving.     

Design of high-speed two-stage cascode-compensated operational amplifiers based on settling time and open-loop parameters

Settling behavior of operational amplifiers is of great importance in many applications. In this paper, an efficient methodology for the design of high-speed two-stage operational amplifiers based on settling time is proposed. Concerning the application of the operational amplifier, it specifies proper open-loop circuit parameters to obtain the desired settling time and closed-loop stability. As the effect of transfer function zeros has been taken into account, the proposed methodology becomes more accurate in achieving the desired specifications. Simulation results are presented to show the effectiveness of the methodology.