Enhanced fair earliest due date first scheduling strategy for multimedia applications in LTE downlink framework

Guaranteeing a certain delay threshold for delay‐sensitive applications in long term evolution (LTE) cellular communication system is a very challenging mission. By implementing an optimal scheduling strategy, this mission will be achieved. In this article, a novel scheduler is introduced in order to meet a predefined level of service quality by guaranteeing a specific delay threshold for delay‐sensitive applications in LTE cellular systems. The proposed scheduler assigns the available resource blocks (RBs) to active user equipments (UEs) tacking into consideration several attributes. The expiration date of each packet, the channel quality, the average data rate previously achieved by each UE, and the number of dropped packets for each UE compared with the average number of packets totally dropped are all considered in the proposed scheduler working mechanism. Consequently, the proposed scheduling strategy reduces the number of packets dropped for multimedia applications, and at the same time maximizes the overall throughput of the network. Simulation results are provided to study and evaluate the performance of the proposed scheduling strategy. A comparative study is presented between the proposed strategy and the most recent scheduling techniques. The obtained results prove that the proposed scheduling strategy has considerably acceptable and appreciated results compared with the results of the state‐of‐the‐art scheduling techniques.     

Interference coordination for LTE-Advanced and FM broadcasting interoperability

The surest way to guarantee that multiple wireless systems can concurrently exist harmlessly, when operating in the same or adjacent channel, is by analyzing spectrum overlapping. This paper proposes a more accurate model to evaluate the interference power from co-channel and adjacent channel of orthogonal frequency division multiplexing-based long term evolution-advanced (LTE-Advanced) towards broadcasting frequency modulation systems at 800?MHz. Power spectral density overlapping factor is employed, and closed form of the interference power loss is derived. Numerical results demonstrate that the proposed method evaluates more exact interference power than the advanced minimum coupling loss (A-MCL) method, where the co-channel and adjacent channel interference powers are reduced by 1.3 and 3?dB, correspondingly, compared to that obtained using the A-MCL method. This decreases the minimum separation distance between the two systems, which can eventually lead to efficient radio spectrum resources utilization.     

The accuracy of PSNR in predicting video quality for different video scenes and frame rates

Peak Signal-to-Noise Ratio (PSNR) is widely used as a video quality metric or performance indicator. Some studies have indicated that it correlates poorly with subjective quality, whilst others have used it on the basis that it provides a good correlation with subjective data. Existing literature seems to provide conflicting evidence of the accuracy of PSNR as a video quality metric. Based on experimental results, we explain a scenario where PSNR provides a reliable indication of the variation of subjective video quality and scenarios where PSNR is not a reliable video quality metric. We show that PSNR follows a monotonic relationship with subjective quality in the case of full frame rate encoding when the video content and codec are fixed. We provide evidence that PSNR becomes an unreliable and inaccurate quality metric when several videos with different content are jointly assessed. Furthermore, PSNR is inaccurate in measuring video quality of a video content encoded at different frame rates because it is not capable of assessing the perceptual trade-off between the spatial and temporal qualities. Finally, where PSNR is not a reliable video quality metric across different video contents and frame rates, we show that a perceptual video model recently approved by the International Telecommunication Union (ITU) provides quality predictions highly correlating with subjective scores even if different video scenes coded at different frame rates are considered in the test set.     

Lithium-Ion Desolvation Induced by Nitrate Additives Reveals New Insights into High Performance Lithium Batteries

Electrolyte additives have been widely used to address critical issues in current metal (ion) battery technologies. While their functions as solid electrolyte interface forming agents are reasonably well-understood, their interactions in the liquid electrolyte environment remain rather elusive. This lack of knowledge represents a significant bottleneck that hinders the development of improved electrolyte systems. Here, the key role of additives in promoting cation (e.g., Li⁺) desolvation is unraveled. In particular, nitrate anions (NO₃⁻) are found to incorporate into the solvation shells, change the local environment of cations (e.g., Li⁺) as well as their coordination in the electrolytes. The combination of these effects leads to effective Li⁺ desolvation and enhanced battery performance. Remarkably, the inexpensive NaNO₃ can successfully substitute the widely used LiNO₃ offering superior long-term stability of Li⁺ (de-)intercalation at the graphite anode and suppressed polysulfide shuttle effect at the sulfur cathode, while enhancing the performance of lithium–sulfur full batteries (initial capacity of 1153 mAh g⁻¹ at 0.25C) with Coulombic efficiency of ≈100% over 300 cycles. This work provides important new insights into the unexplored effects of additives and paves the way to developing improved electrolytes for electrochemical energy storage applications.     

Brookite Formation in TiO2?Ag Nanocomposites and Visible‐Light‐Induced Templated Growth of Ag Nanostructures in TiO2

TiO₂? Ag‐nanocomposites exhibit various desirable properties that make them suitable for a variety of applications, for example in photocatalysis and as bactericidal coatings. In this work, a new method for processing TiO₂? Ag nanocomposites is presented. The nanocomposite films are fabricated from one precursor solution with high silver loading of up to 50%. The resulting films exhibit a microstructure consisting of TiO₂? Ag_xO nanocomposites with a largely XRD‐amorphous TiO₂ matrix containing brookite nanocrystals. This specific microstructure absorbs in the visible range so that photoreduction of Ag ions can be accomplished by using visible light. The thin films can be patterned using simple shadow masks. The illuminated areas show a high density of self‐organized nanoparticles (SNPs) and nanorods (SNRs), which are templated by the TiO₂ porous network. The particle size can be tuned by varying the irradiation time. Most of the SNPs and SNRs form faceted crystals, which are mostly a combination of {111} and {110}. The application of these films as substrates for surface‐enhanced Raman scattering is shown. Enhancement factors as high as 4.6 × 10⁶ could be obtained using rhodamine 6G dye molecules. More applications should involve photocatalytic water purification using visible light.     

Cooperative localization techniques for wireless sensor networks: free,signal and angle based techniques

This paper addresses the problem of localization in sensor networks where, initially, a certain number of sensors are aware of their positions (either by using GPS or by being hand‐placed) and are referred to as anchors. Our goal is to localize all sensors with high accuracy, while using a limited number of anchors. Sensors can be equipped with different technologies for signal and angle measurements. These measures can be altered by some errors because of the network environment that induces position inaccuracies. In this paper, we propose a family (AT‐Family) of three new distributed localization techniques in wireless sensor networks: free‐measurement (AT‐Free) where sensors have no capability of measure, signal‐measurement (AT‐Dist) where sensors can calculate distances, and angle‐measurement (AT‐Angle) where sensors can calculate angles. These methods determine the position of each sensor while indicating the accuracy of its position. They have two important properties: first, a sensor node can deduce if its estimated position is close to its real position and contribute to the positioning of others nodes; second, a sensor can eliminate wrong information received about its position. This last property allows to manage measure errors that are the main drawback of measure‐based methods such as AT‐Dist and AT‐Angle techniques. By varying the density and the error rate, simulations show that the three proposed techniques achieve good performances in term of high accuracy of localized nodes and less energy consuming while assuming presence of measure errors and considering low number of anchors. Copyright © 2012 John Wiley & Sons, Ltd.     

Statistical Design of the Four-MOSFET Structure

The statistical design of the four-MOSFET structure is presented in this paper. The quantitative measure of the effect of mismatch between the four transistors on nonlinearity and offset current is provided through contours. Statistical optimization of the transistor and values is demonstrated. The four-MOSFET structure was fabricated through the MOSIS 2 m process using MOS transistor Level-3 model parameters. Experimental results are included in the paper.     

Low-Complexity Equalization for SC-FDMA Uplink Systems Over Time and Frequency Selective Channels

Wireless Personal Communications - In this paper, we propose novel equalization schemes for compensating the adverse effects caused by carrier frequency offsets (CFOs), timing errors and doubly...     

Next Generation Wireless Mobile System Efficient, Fair, Class Based Packet Scheduling Algorithm

Efficient utilization of network resources is a key goal for emerging broadband wireless access systems (BWAS). This is a complex goal to achieve due to the heterogeneous service nature and diverse quality of service (QoS) requirements of various applications that BWAS support. Packet scheduling is an important activity that affects BWAS QoS outcomes. This paper proposes a novel packet scheduling mechanism that improves QoS in mobile wireless networks which exploit IP as a transport technology for data transfer between BWAS base stations and mobile users at the radio transmission layer. In order to improve BWAS QoS the new packet algorithm makes changes at both the IP and the radio layers. The new packet scheduling algorithm exploits handoff priority scheduling principles and takes into account buffer occupancy and channel conditions. The packet scheduling mechanism also incorporates the concept of fairness. Performance results were obtained by computer simulation and compared to the well known algorithms. Results show that by exploiting the new packet scheduling algorithm, the transport system is able to provide a low handoff packet drop rate, low packet forwarding rate, low packet delay and ensure fairness amongst the users of different services.     

Spread spectrum in three-phase inverter by an optimised dual randomised PWM technique

Randomised pulse width modulation (RPWM) technique has become a viable alternative to deterministic pulse width modulation (DPWM). By spreading the power spectrum in a continuous noise, this new technique better complies with electromagnetic compatibility (EMC) requirements for conducted electromagnetic interferences (EMI) and allows reducing the emitted acoustic noise in variable speed drives (VSDs). The most popular RPWM schemes are randomised pulse position modulation (RPPM) and randomised carrier frequency modulation (RCFM). The combination (RCFM-RPPM) or dual RPWM (DRPWM) has also been proposed. In this article, we propose an optimised DRPWM (ODRPWM) for the three-phase inverter. First, the modulating principle is proposed, and then, a mathematical model of power spectral density (PSD) of the output voltage is developed and validated for the three schemes, namely RPPM, RCFM and RCFM-RPPM. PSD analysis shows that the proposed scheme is more effective on spreading PSD. Moreover, this analysis reveals optimal parameters of randomisation for a maximum spread of the PSD. The optimisation problem is then modelled and solved using two powerful non-linear methods.