Influence of chitosan/clay functional bionanocomposite activated with rosemary essential oil on the shelf life of fresh silver carp

A combination of chitosan biopolymer, nanoclay and rosemary essential oil was prepared as a functional bionanocomposite (FBN). Its ability to improve the shelf life of refrigerated (4 ± 1 °C) silver carp fillets was studied. The fresh fillets were left untreated as a control or coated with chitosan, chitosan/clay bionanocomposite and chitosan/clay/rosemary essential oil (Ch/clay/REO) FBN. Then, they were evaluated for chemical, microbial and sensory properties over 16‐day storage. The samples coated with the FBN had the lowest pH and total volatile basic nitrogen. Ch/clay/REO coating efficiently retarded lipid oxidation by decreasing peroxide, free fatty acid and thiobarbituric acid production in the samples. The coating also reduced total viable and psychrotrophic count of the fillets more than 1.5 log by the end of storage.     

Amide–acid functional SiO2 nanocomposites based on new semi‐crystalline poly(ether‐sulfone‐amide): thermal,combustion and mechanical studies

New amide–acid functional SiO₂ nanoparticle (FSNP)‐reinforced semi‐crystalline aliphatic–aromatic poly(ether‐sulfone‐amide) (PESA) was synthesized using a solution method in dimethylformamide. The surfaces of SiO₂ nanoparticles were functionalized with phthalic anhydride, and subsequently PESA was synthesized using direct polymerization with good yield and desired molar mass. PESA / SiO₂ nanocomposites (PSNCs) were prepared with three different contents of FSNP and the morphology and mechanical, thermal and combustion properties of the PSNCs were studied. The results of X‐ray diffraction, field‐emission scanning electron microscopy and transmission electron microscopy showed a uniform dispersion for FSNP in the PESA matrix. According to the results of mechanical tests, the tensile strength and the Young's modulus of PESA were enhanced by FSNP loading. Thermogravimetric analysis and derivative thermogravimetry results showed a substantial improvement in thermal properties of PESA. The temperature at 5% mass loss was increased from 371.7 to 395.8 °C for the PSNC containing 8 mass% of FSNP, as well as the char yield being enhanced greatly, which was about 30% higher than that of neat PESA. Significant improvements in combustion properties were observed for PSNCs from microscale combustion calorimetry. The peak heat release rate showed an obvious improvement and decreased by about 57% compared to that of neat PESA on 8 mass% loading of FSNP. © 2016 Society of Chemical Industry     

Roll bonding of AA5052 and polypropylene sheets: Bonding mechanisms,microstructure and mechanical properties

Structural, microstructural and mechanical properties in roll bonding of AA5052 and polypropylene sheets have been evaluated in this study. The surface roughness of the AA5052 sheets, rolling temperature and the surface energy of polymer were selected as the bonding variables. The findings indicated that an increase in the surface energy of polypropylene by grafting maleic anhydride would result in higher bonding strength due to chemical interaction between the AA5052 and the maleic anhydride grafted polypropylene (PP-g-MAH). In fact, this reaction caused the formation of an interphase layer at the polymer side of the interface and the diffusion of aluminum into the PP-g-MAH layer. It was also observed that an increase in the rolling temperature increases bonding strength because the polymer penetrates the AA5052 surface irregularities more easily, the PP-g-MAH molecules move more smoothly toward the AA5052 surface, and finally there are more chemical interactions among the layers. An Increase in the bonding strength through increasing the AA5052 surface roughness was attributed to an increase of the van der Waals force and more interaction surface among the layers along with higher mechanical interlocking in the shear tension test.     

Efficient repairing effect of PEG based tri-block copolymer on mechanically damaged PC12 cells and isolated spinal cord

Membrane sealing effects of polymersomes made of tri-block copolymer, PEG-co-FA/SC-co-PEG, (PFSP) were studied on isolated spinal cord strips, PC12 cell lines and artificial bilayer following mechanical impact implemented by aneurism clip, sonication and electric shock, respectively. The homogeneity and size of PFSP, membrane permeability and cell viability were assessed by dynamic light scattering, LDH release and MTT assays. According to the results, the biocompatible, physico-chemical, size, surface charge and amphipathic nature of PFSP polymersome makes it an ideal macromolecule to rapidly reseal damaged membranes of cells in injured spinal cord as well as in culture medium. Compound action potentials recorded from intentionally damaged spinal cord strips incubated with PFSP showed restoration of neural excitability by 82.24 % and conduction velocity by 96.72 % after 5 min that monitored in real time. Thus, they triggered efficient instant and sustained sealing of membrane and reactivation of temporarily inactivated axons. Treatment of ultrasonically damaged PC12 cells by PFSP caused efficient cell membrane repair and led to their increased viability. The optimum effects of PFSP on stabilization and impermeabilizing of the lipid bilayer occurred at the same concentrations applied to the damaged cells and spinal cord fibers and was approved by restoration of membrane conductance and calcein release manifested by NanoDrop technique. The unique physico-chemical characteristics of novel polymersomes introduced here, make them capable to reorganize membrane lipid molecules, reseal the breaches and restore the hydrophobic insulation in spinal cord damaged cells. Thus, they might be considered in the clinical treatment of SCI at early stages.     

Utilization of the yarn pullout test in estimation of the reserved energy of rib knitted fabrics

The yarn pullout test is a prevailing and particular method to evaluate the effects of yarn properties and the structural characteristics of the fabric on the fabric mechanical performance. In this research, a theoretical model of yarn pull out is presented to determine the reserved energy of weft-knitted fabrics with rib 1 × 1 structure. This model is based on the fabric dimensional properties, i.e. stitch length, wale density, yarn diameter and contact angle of yarns. In order to appraise the proposed model, five different double jersey weft-knitted fabrics with rib 1 × 1 structure were produced and exposed to pullout test. Comparison between deviations of theoretical results from experimental results demonstrates that the presented theoretical model exhibits a rational estimation of the reserved energy in these fabrics.     

Online Droop Tuning of a Multi-DG Microgrid Using Cuckoo Search Algorithm

This article presents an intelligent strategy to achieve appropriate real power sharing among distributed generators in a microgrid. The presented strategy employs two droop-based control methods and automatically adjusts their parameters. The first method is unit power control, which has specifications similar to the conventional droop method, and the second is feeder flow control, showing significant characteristics in both grid-connected and islanded modes operation of a microgrid. A combination of unit power control and feeder flow control methods is used for a multi-distributed generator microgrid. The microgrid operation mode passes from the grid-connected to the islanded through a transition. A new evolutionary algorithm called cuckoo search is employed to coordinate the power management of distributed generators within an on-line droop tuning. In comparison to the predecessor evolutionary algorithms, the cuckoo search algorithm represents more effective random processes with fewer parameters. Using the proposed control strategy, while the distributed generators contribute to load demand provision based on their rated powers, their powers are optimized in terms of overshoot and settling time. Digital time-domain simulation studies are carried out in the MATLAB/SIMULINK (The MathWorks, Natick, Massachusetts, USA) environment to verify the performance of the proposed control system.     

A new arrangement of Z‐source AC–AC converter and its closed‐loop control system

In this study, a Z‐source alternating current‐to‐alternating current (AC–AC) converter with a specific topology, which can provide both buck and boost modes, is investigated. This converter, which can be implemented easily, utilizes only two switches with complemented commands. A comparison between the Z‐source AC–AC converter and a conventional thyristor voltage controlled one is presented here, and it shows that in the most areas, the Z‐source converter provides a faster response and lower total harmonic distortion of the output currents than the conventional one. Moreover, the Z‐source converter is also extended to the multiphase systems. In addition, a new arrangement of this converter is proposed here to remove the isolated single‐phase sources. Furthermore, an open‐loop method is proposed for soft‐starting applications. Finally, a closed‐loop control system is also suggested for a three‐phase Z‐source converter to soft start and control the speed of an induction motor. Computer simulations show the validity and effectiveness of the proposed schemes. Copyright © 2014 John Wiley & Sons, Ltd.