Nitrogenated porous carbon electrodes for supercapacitors

Nitrogenated porous carbon materials, made by coating the pore surface with nitrogen functional groups from the pyrolysis of hexamine, were characterized and tested for supercapacitor applications. From X-ray photoelectron spectroscopy, the nitrogen content of the nitrogenated carbon sample was found to be 14?wt%. Electrochemical properties from potentiostatic and galvanostatic measurements, and open circuit voltage (OCV) were used to evaluate the effect of nitrogen in porous carbon electrodes. The nitrogenated carbon exhibits pseudocapacitive behavior and an increase in capacitance that is almost double that of plain porous carbon. The cyclic stability is also improved, as the sample retains its high capacitance even after extensive cycling. Also, the nitrogenated carbon shows battery-like characteristics with an initial OCV of ca. 0.4?V, and an OCV of ca. 0.3?V after cycling.     

Optical scanning system for quality control of GEM-foils

An optical scanning system was commissioned and further developed in the Detector Laboratory of Helsinki Institute of Physics and University of Helsinki. It was designed to automatically scan, perform on-line analysis and to classify the overall quality of GEM-foils especially of the GEM-TPC detectors for Super-FRS at FAIR. The optical scanning system consists of precision positioning table, lighting, optics and operating system with analysis software. It has active scanning area of 95×95 cm² and it can study this area with the minimum resolution of 128 lp/mm. Performance of the system and first results from the GEM-foil uniformity and quality analysis are presented.     

Impact of cycling temperatures on Fusarium verticillioides and Fusarium graminearum growth and mycotoxins production in soybean

BACKGROUND: Fusarium graminearum and F. verticillioides are two very important mycotoxigenic species as they cause diverse diseases in crops. The effects of constant and cycling temperatures on growth and mycotoxin production of these species were studied on soybean based medium and on irradiated soya beans. RESULTS: F. graminearum grew better when was incubated at 15, 20 and 15–20 °C (isothermal or cycling temperature) during 21 days of incubation. Maximum levels of zearalenone and deoxynivalenol (39.25 and 1040.4 µg g^?1, respectively) were detected on soya beans after 15 days of incubation and the optimal temperature for mycotoxin production was 15 °C for zearalenone and 20 °C for deoxynivalenol. F. verticillioides grew better at 25 °C in culture medium and at 15/20 °C and 15/25 °C on soybean seeds. Fumonisin B₁ was produced only in culture medium, and the maximum level (7.38 µg g^?1) was found at 15 °C after 7 days of incubation. CONCLUSION: When growth and mycotoxin production under cycling temperatures were predicted from the results under constant conditions, observed values were different from calculated for both species and substrate medium. Therefore, care should be taken if data at constant temperature conditions are to be extrapolated to real field conditions. Copyright © 2012 Society of Chemical Industry     

A methodology for screening of microalgae as a decision making tool for energy and green chemical process applications

The increasing interest for biotechnological use of microalgae demands a methodology for selection of species suitable to support the development of technologies based on the use of such non-conventional renewable raw material, i.e., green industrial applications. The vast and expanding collection of experimental data on both cell growth and biomass composition available in the literature can be used to reduce the cost of the experimental investigations required to support process engineering and optimization. Selecting the appropriate organism requires extracting useful information from such data, a cumbersome task since various multidisciplinary factors must be considered. This paper presents a computer-aided methodology for selecting appropriate algal species given an energy or green chemical process application employing microalgae as a renewable raw material. The approach is “system oriented”, based on biomass composition and chemical processing of the biomass downstream of the CO₂ biofixation and harvesting operations. Quantitative performance results are supported by professional process simulation. Besides comparison of a set of species performances, the proposed methodology also allows the discrimination among distinct algal compositions resulting from different growth conditions for a given species. Furthermore, three categories of screening metrics are proposed to be maximized by the decision making procedure in order to elicit the relevant information. To demonstrate the potential of the proposed methodology, a databank of both biochemical and elemental compositions of microalgal biomass was used in three green applications: Assessment of biomass heating value; production of syngas by gasification of the biomass; and production of Bio-H₂. Within the accuracy of the databank employed to illustrate the procedure, the methodology selected Botryococcus braunii and Isochrysis galbana as potential promising candidates, for the three examined applications.     

Modification of coconut fibers with polyaniline for manufacture of pressure‐sensitive devices

This article studies the modification of coconut fibers with polyaniline (PAni) with help of statistical experimental design techniques. The main factors studied here were the techniques used for particle dispersion (sonication vs. magnetic stirring) and the type of initiator (ammonium persulfate, APS, vs. ammonium cerium sulfate dihydrate, Ce(IV)). The obtained materials were characterized through low field nuclear magnetic resonance, small‐and wide‐angle X‐ray scattering, scanning electron microscopy, fourier transform infrared spectroscopy, and ultraviolet–visible spectroscopy. Additionally, the electrical resistivities and respective sensitivities to variations of the applied pressure were evaluated for all obtained samples, with help of standard volume resistivity measurements and electro‐mechanical tests. The materials prepared through magnetic stirring with APS presented the best electrical and electromechanical properties, although materials prepared through sonication with Ce(IV) also presented good electrical and electromechanical properties and could be prepared much faster. As a consequence, modification of coconut fibers with PAni, using sonication as the particle dispersion technique and Ce(IV) as initiator, constitutes a very promising procedure for manufacture of pressure‐sensitive devices. POLYM. ENG. SCI., 54:2887–2895, 2014. © 2014 Society of Plastics Engineers     

Effects of worker size on the dynamics of fire ant tunnel construction

Social insects work together to complete tasks. However, different individuals within a colony may vary in task proficiency. We investigated if fire ant (Solenopsis invicta) worker body size influenced the ability to construct tunnels—a key component of subterranean nests. We monitored excavation by worker groups in a substrate of small wetted glass particles in quasi-two-dimensional arenas. Morphological and network features of the tunnel system were measured. Total tunnel area did not differ significantly between groups of large and small workers, although the tunnel area of control sized workers was significantly larger than that of large workers. Moreover, large workers created wider but shorter tunnels, with slower growth rate of tunnel number. However, edge–vertex scaling and degree distribution of the tunnel network were similar across all treatments. In all cases, the amount of excavated material was correlated with the number of active workers. Our study reveals that morphological features of excavated tunnels show modest variation when constructed by workers of varying sizes, but topological features associated with the tunnel network are conserved. These results suggest that important behavioural aspects of tunnel construction—and thus nest building—are similar among morphologically distinct members of fire ant societies.     

Ozonation of Pyrolytic Aqueous Phase: Changes in the Content of Phenolic Compounds and Color

Ozonation on the phenols present in pyrolytic aqueous phases attained from biomass thermochemical conversion was evaluated. During ozonation, the dark color of original samples was found to decrease as a function of ozonation time. The oxidation kinetics of phenols was quantified by a method based on the color changes of samples. The oxidation profiles showed different behaviors and in some cases the phenols presented a positive correlation with the relative R color parameter, except eugenol, syringol, and vanillin which were markedly different. Finally, the color changes observed seem to be associated with the changes in the overall content of phenols and with the change in the molecular weight of the heavy fractions that include lignin oligomers.