Improving the mechanical,thermal and electrical properties of polyurethane- graphene oxide nanocomposites synthesized by in-situ polymerization of ester-based polyol with hexamethylene diisocyanate

Many polyols or diols have been used for the synthesis of polyurethanes (PU), however, to the best of our knowledge, PU-graphene oxide (GO) nanocomposites synthesized with ester-based polyols have been rarely studied. In this work ester-based polyol synthesized by the reaction of adipic acid and 1,4 butane diol, was in-situ polymerized with hexamethylene diisocyanate (HDI) and GO to prepare PU-GO nanocomposites. The content of GO was changed from 1 to 2.5 wt% and its effect on the mechanical, thermal and electrical properties of the samples were examined. The presence of GO more than 1.5% in the nanocomposites resulted in brittle samples and reduced the tensile strength, however, the Young’s modulus of the samples containing 1 and 1.5% was increased to 11 and 12.08-fold (275 and 302 MPa) compared to the neat PU (25 MPa), respectively. The shore A hardness of the samples was increased from 86 for PU to 96 for PUGO-1.5. The abrasion resistance of the samples was decreased by increasing the GO content. Results of the thermogravimetric analysis showed that higher amounts of GO increase the thermal stability of the samples. The chemical and physical interactions between the surface of GO nanolayers and the PU chains were confirmed by FTIR spectroscopy. The dynamic mechanical analysis of the samples showed that GO nanolayers decreased the molecular motions of the PU chains in the nanocomposites which were noticed by shifting the glass transition to the higher temperatures.     

Voronoi based discrete least squares meshless method for heat conduction simulation in highly irregular geometries

A new technique is used in Discrete Least Square Meshfree(DLSM) method to remove the common existing deficiencies of meshfree methods in handling of the problems containing cracks or concave boundaries. An enhanced Discrete Least Squares Meshless method named as VDLSM(Voronoi based Discrete Least Squares Meshless) is developed in order to solve the steady-state heat conduction problem in irregular solid domains including concave boundaries or cracks. Existing meshless methods cannot estimate precisely the required unknowns in the vicinity of the above mentioned boundaries. Conducted researches are limited to domains with regular convex boundaries. To this end, the advantages of the Voronoi tessellation algorithm are implemented. The support domains of the sampling points are determined using a Voronoi tessellation algorithm. For the weight functions, a cubic spline polynomial is used based on a normalized distance variable which can provide a high degree of smoothness near those mentioned above discontinuities. Finally, Moving Least Squares(MLS) shape functions are constructed using a varitional method. This straight-forward scheme can properly estimate the unknowns(in this particular study, the temperatures at the nodal points) near and on the crack faces, crack tip or concave boundaries without need to extra backward corrective procedures, i.e. the iterative calculations for modifying the shape functions of the nodes located near or on these types of the complex boundaries. The accuracy and efficiency of the presented method are investigated by analyzing four particular examples. Obtained results from VDLSM are compared with the available analytical results or with the results of the well-known Finite Elements Method(FEM) when an analytical solution is not available. By comparisons, it is revealed that the proposed technique gives high accuracy for the solution of the steady-state heat conduction problems within cracked domains or domains with concave boundaries and at the same time possesses a high convergence rate which its accuracy is not sensitive to the arrangement of the nodal points. The novelty of this paper is the use of Voronoi concept in determining the weight functions used in the formulation of the MLS type shape functions.     

Physical and Morphological Properties of Combined Treated Wood Polymer Composites by Maleic Anhydride and Methyl Methacrylate

Wood polymer composites were prepared by consecutive impregnation with maleic anhydride (MAN) and methyl methacrylate (MMA). Samples impregnated with MAN alone, were heated at 120°C and 150°C for 4 and 8 h. Based on the Fourier transform infrared (FT-IR) analysis and soaking-drying test results, treatment with MAN at 150°C for 4 h resulted in formation of stable crosslinks. In the second stage, MMA was used for in situ polymerization within MAN-treated wood. Field emission scanning electron microscopy observation and FT-IR analysis indicated that MMA copolymerized with MAN, and the resultant polymer filled up the lumen and is also grafted on to the cell wall. Improvement of water repellency and dimensional stability were observed in the treated samples, particularly in combined treated samples. The MAN/MMA treatment improved interaction between polymer and wood.     

A linear model of elasto-plastic and adhesive contact deformation

Rigorous non-linear models of elasto-plastic contact deformation are time-consuming in numerical calculations for the distinct element method (DEM) and quite often unnecessary to represent the actual contact deformation of common particulate systems. In this work a simple linear elasto-plastic and adhesive contact model for spherical particles is proposed. Plastic deformation of contacts during loading and elastic unloading, accompanied by adhesion are considered, for which the pull-off force increases with plastic deformation. Considering the collision of a spherical cohesive body with a rigid flat target, the critical sticking velocity and coefficient of restitution in the proposed model are found to be very similar to those of Thornton and Ning’s model. Sensitivity analyses of the model parameters such as plastic, elastic, plastic-adhesive stiffnesses and pull-off force on work of compaction are carried out. It is found that by increasing the ratio of elastic to plastic stiffness, the plastic component of the total work increases and the elastic component decreases. By increasing the interface energy, the plastic work increases, but the elastic work does not change. The model can be used to efficiently represent the force-displacement of a wide range of particles, thus enabling fast numerical simulations of particle assemblies by the DEM.     

ERES: an extended regular expression signature for polymorphic worm detection

Journal of Computer Virology and Hacking Techniques - The quick spreading of modern sophisticated polymorphic worms poses a serious threat to the internet security. So far, several signature...     

Synthesis of Cellulose-graft-Polychloromethylstyrene-graft-Polyacrylonitrile Terpolymer/Organoclay Bionanocomposite by Metal Catalyzed Living Radical Polymerization and Solvent Blending Method

A bionanocomposite of grafted cellulose and organo-modified clay was synthesized through solution intercalation method. For this purpose, chloromethylstyrene was grafted onto cellulose using acryloylchloride and the subsequent free radical polymerization. The synthesized cellulose-graft-polychloromethylstyrene was used as an atom transfer radical polymerization macroinitiator of acrylonitrile in the presence of CuCl/2,2′-bipyridine catalyst system, to prepare the cellulose-graft-polychloromethylstyrene-graft-polyacrylonitrile terpolymer. For preparing the modified clay, Na-montmorillonite was mixed with hexadecyl trimethyl ammonium chloride salt. Finally, cellulose-graft-polychloromethylstyrene-graft-polyacrylonitrile/organoclay bionanocomposite was prepared in CCl₄ by solution intercalation method.     

Thin natural gelatin/chitosan nanofibrous scaffolds for retinal pigment epithelium cells

Damage of the retinal pigmented epithelial cells causes various diseases such as age-related macular degeneration in retinal tissue. Nowadays, scientists are attempting to replace lost retinal cells with healthy and efficient cells that provide better conditions for recovering and preventing blindness. In this study, gelatin/chitosan nanofibrous scaffolds with mean diameters of 180?nm were fabricated for subretinal space through electrospinning. Thickness and morphology of the gelatin–chitosan scaffolds were analyzed by scanning electron microscopy (SEM). The results showed that the high rate of degradation, i.e., 90% damage was obtained after 1 month. The cell viability of gelatin/chitosan nanofibers were measured by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The SEM results of cultured RPE on gelatin/chitosan scaffolds showed the appropriate adhesion of cells on the substrate. The results of the identity of RPE cells cultured on the scaffolds indicated that a large number of cells strongly expressed RPE65 and cytokeratin 8/18.     

Large Scale Reservoirs System Operation Optimization: the Interior Search Algorithm (ISA) Approach

Reservoirs are built to provide a powerful tool to control and manage surface water resources in order to cover inconsistency between water resources and demands. Due to finite available water and the increasing demands for water especially in arid and semi-arid regions like Iran, reservoirs must be optimally operated in order to use water in the most efficient way. This study applies the Interior Search Algorithm (ISA) to solve large scale reservoirs system operation optimization problems. The ISA is a meta-heuristic algorithm inspired from a systematic methodology of architecture process and mirror work utilized by Persian designers for decoration. Unlike other meta-heuristic algorithms, the ISA just have one parameter to tune which is a great advantage. In this study the parameter of the ISA tuned automatically using a linear equation. A real-world one-reservoir operation problem (i.e. Karun-4) and two large scale benchmark problems (i.e. four-reservoir and ten-reservoir operation problem) were employed to show the effectiveness of the ISA. The results shows the high ability of the ISA to solve reservoirs system operation problems as it achieved solutions 99.97, 99.99 and 99.95 % of global optimum for Karun-4 reservoir, four-reservoir and ten-reservoir system operation problems, respectively. These results are the best results reported so far in the studied problems. Comparing results of the ISA with those of non-linear programming (NLP), linear programming (LP), genetic algorithm (GA) and other meta-heuristic algorithms indicates fast convergence to global optimum. Considering the results, it can be stated that the ISA is a powerful tool to optimize complex large scale reservoir system operation problems.