Reservoirs are built to provide a powerful tool to control and manage surface water resources in order to cover inconsistency between water resources and demands. Due to finite available water and the increasing demands for water especially in arid and semi-arid regions like Iran, reservoirs must be optimally operated in order to use water in the most efficient way. This study applies the Interior Search Algorithm (ISA) to solve large scale reservoirs system operation optimization problems. The ISA is a meta-heuristic algorithm inspired from a systematic methodology of architecture process and mirror work utilized by Persian designers for decoration. Unlike other meta-heuristic algorithms, the ISA just have one parameter to tune which is a great advantage. In this study the parameter of the ISA tuned automatically using a linear equation. A real-world one-reservoir operation problem (i.e. Karun-4) and two large scale benchmark problems (i.e. four-reservoir and ten-reservoir operation problem) were employed to show the effectiveness of the ISA. The results shows the high ability of the ISA to solve reservoirs system operation problems as it achieved solutions 99.97, 99.99 and 99.95 % of global optimum for Karun-4 reservoir, four-reservoir and ten-reservoir system operation problems, respectively. These results are the best results reported so far in the studied problems. Comparing results of the ISA with those of non-linear programming (NLP), linear programming (LP), genetic algorithm (GA) and other meta-heuristic algorithms indicates fast convergence to global optimum. Considering the results, it can be stated that the ISA is a powerful tool to optimize complex large scale reservoir system operation problems. 相似文献
A noncovalent functionalization of the edges of reduced graphene oxide (RGO) with β-cyclodextrin-graft-hyperbranched polyglycerol (β-CD-g-HPG) was successfully performed via a host-guest interaction. The results showed that β-CD-g-HPG disperses the graphene sheets better than pure β-CD or HPG. The resulted supramolecular structure is stable in neutral water medium more than one week. However, in acidic medium the host-guest interaction is collapsed and graphene nanosheets precipitate. 相似文献
Energy optimization of second distillation tower of a pyrolysis gasoline hydrogenation unit has been studied by the thermal cycle of vapor recompression method. The mentioned cycle is connected to the second distillation tower of the stabilizer of pyrolysis gasoline, and the results are found promising. The composite pinch curve for both the current and the optimized methods are shown. Moreover, an increase in the heat transfer rate in heat exchanger E-1014 causes energy recovery in reboiler. According to simulation results, by vapor recompression to 1970 kPa and using this heat source for thermal integration, condenser and reboiler’s energies are decreased by 56.93 and 30.4 percentage, respectively. 相似文献
Stochastic behavior of renewable energy sources forces designers to optimize the energy converters for the purpose of capturing the maximum amount of available energy. The performance of horizontal axis wind and tidal turbines mainly depends on the geometrical properties such as chord and twist distributions and also the types of sections which are utilized along the blade. The purpose of presented paper is introducing a procedure which can be utilized in order to select the optimum sections for horizontal axis tidal turbines for the purpose of increasing the turbine performance. The presented procedure also can be applied for horizontal axis wind turbines. For the purpose of evaluating the performance of the proposed method, two design types (chord and twist distributions) of tidal turbines are selected as case studies. Power coefficient is considered as objective function, and three types of hydrofoils namely NACA63-8xx, NACA44xx, and RISO-A1-xx are selected as candidate solutions. A blade element momentum theory model is used for calculating the power coefficient. The discrete ant colony optimization algorithm is selected as optimization tool. The results indicate that the utilization of the proposed method will considerably decrease the required process time for obtaining the optimum sections across the blade span, and also it is shown that using different types of sections across the blade span can increase the power coefficient of the turbine. The importance of the proposed method will be significant when various types of hydrofoils and airfoils can be considered as candidate sections across the blade span.
Styrene monomer is a volatile organic compound that has many applications in plastics, rubber, and paint manufacturing industries. Exposure to styrene vapor has certain effects, including suppression of the central nervous system, loss of concentration, weakness and fatigue, and nausea and there is a possibility of carcinogenesis in long-term exposure. Therefore, it is necessary to control and eliminate this vapor. The aim of this study was to investigate the performance of zinc oxide nanoparticles on modified natural zeolites in removing styrene vapor from the air. Natural zeolites of clinoptilolite were modified using hydrochloric acid and diphenyldichlorosilane. Next, zinc oxide nanoparticles with different ratios of 3, 5, and 10 wt% were stabilized on the zeolites. To determine their characteristics, samples were used from BET, SEM and XRD analyses. The input styrene concentration and the ratio of nanoparticles stabilized on zeolites were studied as effective functional parameters on the removal process. The efficiency results of natural zeolites (Ze) and modified zeolites (Mze) in styrene adsorption from the air show that the styrene breakthrough in the bed of MZe compared to that of Ze increases approximately two times. Also, the results showed that the removal by the process of UV/MZe-ZnO 3%, UV/MZe-ZnO 5%, and UV/MZe-ZnO 10%, was 36.5%, 40%, and 26%, respectively. From the results it can be concluded that MZe can increase the efficiency of photocatalytic degradation. Clinoptilolites of Iran can be used as an adsorbent to remove polluted air in industries that have low concentrations and flow rates. 相似文献
Heat exchangers are integral parts of important industrial units such as petrochemicals, medicine and power plants. Due to the importance of systems energy consumption, different modifications have been applied on heat exchangers in terms of size and structure. In this study, a novel heat exchanger with helically grooved annulus shell and helically coiled tube was investigated by numerical simulation. Helically grooves with the same pitch of the helical coil tube and different depth are created on the inner and outer wall of annulus shell to improve the thermal performance of heat exchanger. In the first section, thermal performance of the shell and coil heat exchanger with the helical grooves on its outer shell wall was compared with same but without helical grooves. At the second section, helically grooves created on both outer and inner wall of the annulus shell with different groove depths. The results showed that the heat exchanger with grooves on both inner and outer shell wall has better thermal performance up to 20% compared to the heat exchanger with grooves on only outer shell wall. The highest thermal performance achieves at lower flow rates and higher groove depths whereas the pressure drop did not increase significantly. 相似文献
This paper proposes a vibration-based fault-diagnosis method for mechanical parts. This method, after algorithm development, only requires a single inexpensive test to inspect the part which could take as short as half a second. The algorithm is developed in three major stages, (i) exciting specimens without or with known faults using a controlled force and recording acceleration of a single point for a short time (ii) finding a signature for each faulty specimen, using Fourier transform and statistical analysis. (iii) Developing a multi-layer perceptron, as a mathematical model, using the results of stage (ii). The elements of a part signature are the inputs to the model. The location (and possibly size and shape factor) of the fault is model output. Stage (i) can be performed experimentally or alternatively with a validated FEM, one experiment or simulation per specimen. The proposed technique was examined to locate (isolate) a fault on an automobile cylinder head. The presented accuracy is considerable, and the data collected at fairly low frequency range (below 1200 Hz) were found to be sufficient for this technique. In the case study of this paper, possible fault locations are on a line; as a result, fault location has one dimension. It is shown that the technique can be extended to higher dimensions. 相似文献
Mechanochemical sulfidization of a mixed sulfide/oxide copper ore by co-grinding with sulfur and additives including Mg(NO3)2 and Fe(NO3)3 salts and iron, aluminum and magnesium powders was investigated for the first time. Also, the influence of sulfidization during the wet-milling process was examined on the separation efficiency and recovery of copper in detail. The results demonstrated that co-grinding with sulfur solely had the best flotation performance at the value of 0.5 wt.% and it was attributed to the possible existence of S-O bonding on copper oxides surfaces. In addition, adding magnesium nitrate salt, magnesium powder, iron nitrate salt and aluminum powder as additive associated with 0.5 wt% sulfur into ball milling caused the flotation improvement at the amounts of 0.2 wt%, 0.2 wt%, 0.5 wt% and 0.5 wt%, respectively. Also, the effect of grinding time and sulfidization pH with 0.5 wt% sulfur solely was determined and pHs of 7.5 to 8.5 gave the best results. The highest recovery (75.76%) and separation efficiency (63.44%) were achieved at pH of 7.5 and 8.5, respectively. 相似文献