Influence of a Reactive Organoclay on Polymerization and Properties of Polyurethane Nanocomposites

In this study, segmented polyurethane/clay nanocomposites were prepared via in situ intercalative polymerization of polyether polyol mixed nanoclay with toluene diisocyanate, followed by chain extending with 1,4-butanediol. The reactive prepolymer tended to gel by increasing the clay content from 0.4 to 1.5 wt.%. This unusual phenomenon was found to be caused by a catalytic effect of quaternary ammonium intercalant on the organoclay. The procedure used for intercalated nanocomposites, is confirmed by wide angle X-ray diffraction studies. Thermogravimetric analysis results demonstrated a very good increase in onset degradation temperature by adding only 0.8 wt.% of organoclay.     

Thin natural gelatin/chitosan nanofibrous scaffolds for retinal pigment epithelium cells

Damage of the retinal pigmented epithelial cells causes various diseases such as age-related macular degeneration in retinal tissue. Nowadays, scientists are attempting to replace lost retinal cells with healthy and efficient cells that provide better conditions for recovering and preventing blindness. In this study, gelatin/chitosan nanofibrous scaffolds with mean diameters of 180?nm were fabricated for subretinal space through electrospinning. Thickness and morphology of the gelatin–chitosan scaffolds were analyzed by scanning electron microscopy (SEM). The results showed that the high rate of degradation, i.e., 90% damage was obtained after 1 month. The cell viability of gelatin/chitosan nanofibers were measured by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The SEM results of cultured RPE on gelatin/chitosan scaffolds showed the appropriate adhesion of cells on the substrate. The results of the identity of RPE cells cultured on the scaffolds indicated that a large number of cells strongly expressed RPE65 and cytokeratin 8/18.     

Success criteria analysis in support of probabilistic risk assessment for nuclear power plants: application on SGTR accident

Success criteria analysis (SCA) bridges the gap between deterministic and probabilistic approaches for risk assessment of complex systems.To develop a risk model,SCA evaluates systems behaviour in response to postulated accidents using deterministic approach to provide required information for the probabilistic model.A systematic framework is proposed in this article for extracting the front line systems success criteria.In this regard,available approaches are critically reviewed and technical challenges are discussed.Application of the proposed methodology is demonstrated on a typical Westinghouse-type nuclear power plant.Steam generator tube rupture is selected as the postulated accident.The methodology is comprehensive and general;therefore,it can be implemented on the other types of plants and complex systems.     

Cube-octameric silsesquioxane (POSS)-capped magnetic iron oxide nanoparticles for the efficient removal of methylene blue

Octavinyl polyhedral oligomeric silsesquioxane (POSS) was polymerized on the surface of Fe3O4 nanoparticles (NPs) and then the NPs were functionalized with carboxylic acid groups using thiol-ene click reactions with thioglycolic acid.The as-prepared Fe3O4@POSS-COOH magnetic hybrid NPs had mesoporous structures with an average particle diameter of 15 nm and a relatively high specific surface area of 447 m^2· g^-1.Experimental results showed that 4 mg of Fe3O4@POSS-COOH NPs efficiently adsorbed and removed methylene blue from water at 5 min.This is due to the presence of both carboxylic acid and pendant vinyl groups on the Fe3O4@POSS-COOH NPs.These NPs could be easily withdrawn from water within a few seconds under moderate magnetic field and showed high stability in acid and alkaline aqueous mediums.     

Spatially Resolved Characterization of the Gas Propagator in Monolithic Structured Catalysts Using NMR Diffusiometry

Gas diffusivity measurements in opaque porous media were performed using nuclear magnetic resonance. An optimized pulsed‐field gradient stimulated echo method with free volume selection was used to investigate the propagator of thermally polarized methane gas within commercial monolithic catalyst supports. Since signal losses due to T₂ relaxation were minimized by using a short echo time, diffusion processes could be characterized by the measured propagator functions and effective diffusion coefficients were determined for a broad range of observation times and in different spatial directions. The study of this noninvasive characterization of gas diffusion found a clear effect of the monolith type and its pore size and coating on the effective gas diffusion coefficient and the apparent tortuosity for a given observation time.     

Environmental damage costs in Iran by the energy sector

On the basis of the energy supply and demand, this paper assesses the environmental damage from air pollution in Iran using the Extern-E study that has extended over 10 years and is still in progress in the European Union (EU) commission. Damage costs were transferred from Western European practice to the conditions of Iran by scaling according to GDP per capital measured in PPP terms.     

Low voltage low noise open loop automatic amplitude control for voltage-controlled oscillators

This paper presents a low voltage low noise open loop automatic amplitude control method for voltage-controlled oscillators (VCO’s). In this method a feedback mechanism keeps the VCO at its optimum amplitude over temperature and process variations and then the loop is broken to avoid noise injection form the control circuitry to the VCO. The loop does not add extra noise to the VCO. Based on the proposed method, a low voltage low noise LC-VCO was designed for a low phase noise application in TSMC 0.18 micron RFCMOS technology. Simulations show considerable improvement in the phase noise with the application of the proposed method.     

Composition and biological activities of essential oils from four Heracleum species

The composition of essential oils from aerial parts of Heracleum persicum, a widely used medicinal plant, and three other Heracleum species growing wild in Iran were analysed by GC and GC–MS. Myristicin (53.6%), (E)-anethole (25.0%), hexyl butanoate (29.7%) and elemicin (41.1%) were the major compounds of Heracleum pastinacifolium, H. persicum, Heracleum rechingeri and Heracleum transcaucasicum, respectively. Cytotoxic activity assessed on three human cancer cell lines (HeLa, LS180 and Raji), showed that essential oils from H. transcaucasicum (IC₅₀ values; 0.362–0.594 mg/ml) followed by H. pastinacifolium (0.497–1.398 mg/ml) had moderate antitumoral activities. In the DPPH radical scavenging assay, H. pastinacifolium and H. persicum oils showed the highest activities with IC₅₀ values of 7.3 and 7.4 mg/ml, respectively. Antioxidant activity correlated well with the total phenolic content of the oils. None of the essential oils showed significant antimicrobial activities.     

A Convenient Method for Preparation of Amphiphilic Monomethoxypoly (Ethylene Glycol)–Polystyrene Diblock Copolymer by NMRP Technique

Amphiphilic block copolymers are macromolecular compounds of great importance from both fundamental scientific and many technological point of views for a large variety of applications. Amphiphilic diblock copolymer containing segments of monomethoxypoly(ethylene glycol) and polystyrene (MPEG-b-PS) was synthesised by a convenient method for preparation of macroinitiator MPEG-TEMPO for ‘living’ free radical polymerization (NMRP technique). Initially, derivative of MPEG with chlorine function has been prepared in an one-step reaction with thionyl chloride. 1-hydroxy-2,2,6,6-tetramethyl-piperidine (TEMPO-OH) obtained by reduction of 2,2,6,6-tetramethyl-piperidinyl-1-oxy (TEMPO) with sodium ascorbate was coupled with chlorinated MPEG to yield the macroinitiator MPEG terminated with a TEMPO unit (MPEG-TEMPO), which was further used to prepare the diblock copolymer MPEG-b-PS of styrene. The product was purified and identified by ¹H NMR, GPC and, FT-IR.