ICA1L Is Associated with Small Vessel Disease: A Proteome-Wide Association Study in Small Vessel Stroke and Intracerebral Haemorrhage

Small vessel strokes (SVS) and intracerebral haemorrhages (ICH) are acute outcomes of cerebral small vessel disease (SVD). Genetic studies combining both phenotypes have identified three loci associated with both traits. However, the genetic cis-regulation at the protein level associated with SVD has not been studied before. We performed a proteome-wide association study (PWAS) using FUSION to integrate a genome-wide association study (GWAS) and brain proteomic data to discover the common mechanisms regulating both SVS and ICH. Dorsolateral prefrontal cortex (dPFC) brain proteomes from the ROS/MAP study (N = 376 subjects and 1443 proteins) and the summary statistics for the SVS GWAS from the MEGASTROKE study (N = 237,511) and multi-trait analysis of GWAS (MTAG)-ICH–SVS from Chung et al. (N = 240,269) were selected. We performed PWAS and then a co-localization analysis with COLOC. The significant and nominal results were validated using a replication dPFC proteome (N = 152). The replicated results (q-value < 0.05) were further investigated for the causality relationship using summary data-based Mendelian randomization (SMR). One protein (ICA1L) was significantly associated with SVS (z-score = −4.42 and p-value = 9.6 × 10⁻⁶) and non-lobar ICH (z-score = −4.8 and p-value = 1.58 × 10⁻⁶) in the discovery PWAS, with a high co-localization posterior probability of 4. In the validation PWAS, ICA1L remained significantly associated with both traits. The SMR results for ICA1L indicated a causal association of protein expression levels in the brain with SVS (p-value = 3.66 × 10⁻⁵) and non-lobar ICH (p-value = 1.81 × 10⁻⁵). Our results show that the association of ICA1L with SVS and non-lobar ICH is conditioned by the cis-regulation of its protein levels in the brain.     

Effect of low‐temperature plasma and chitosan treatment on wool dyeing with Acid Red 27

This study examines in detail the influence of low‐temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink‐resistance measurements. Surface modification was assessed by contact‐angle measurements of human hair fibers, which were used as a model to study the wetting properties of the treated wool knitted fabrics. The dyeing behavior was assessed from the diffusion mechanism point of view. The dyeing kinetics were measured at two different pHs (4.2 and 6.5) and three different temperatures (60, 85, and 100°C) to gain information about the contribution of the surface modification treatment to the dyeing mechanism. The exhaustion and reflectance data were compared, and the apparent diffusion coefficients were calculated. On the basis of the obtained results, a model for the dyeing mechanism of the chitosan treated wool was proposed. When treated with chitosan, the polymer sheath spread on the surface of the fibers acted as a predominant dyeing site in very short dyeing times, thus interacting with the dye and in later stages imparting the dye to the wool fiber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2204–2214, 2005     

High-Stable Mesoporous Ni-Ce/Clay Catalysts for Syngas Production

Abstract  

A mesoporous-type catalytic support was synthesized through the modification of a smectite with polyvinyl alcohol (PVA) and microwaves. Texture and micro-morphology of the support was determined. Several techniques were employed in order to describe the chemical environment of active species on the surface. Ni⁰ particle sizes were dependent on the structural site of reducible species. High stable Ni-Ce catalysts (calcined at 800 °C) were evaluated in the CO₂ reforming of methane reaction at 700 °C (WHSV = 96 L g⁻¹ h⁻¹, without dilution gas and pre-reduction). The catalysts have presented CH₄ conversions between 40 and 65%, CO₂ conversion between 35 and 65% and H₂/CO ratios between 0.2 and 0.4.     

Semiquantitative analysis of thiophenic compounds in light cycle oil (LCO) using C NMR spectroscopy

S-methyltetrafluoroborate salts of the thiophenic compounds (CH₃-S⁺:BF₄⁻) present in LCO petroleum fractions were obtained and analyzed by ¹H and ¹³C NMR spectroscopy. The methylation of the samples was carried out using 99.5% ¹³C enriched methyl iodine, to improve the sensitivity of the technique. The amount of the methylated derivatives was determined by the internal standard method; using dioxane as a reference, 37 sulphur compounds were detected. Among them, benzo[b]thiophene, dibenzo[b,d]thiophene, and several isomers of methyl, dimethyl and trimethyl[b]benzothiophenes were the most abundant. With this research, it was demonstrated that NMR spectroscopy can be used to analyze thiophenic compounds from petroleum medium fractions.     

Removal of sulfamethoxazole from waters and wastewaters by conductive‐diamond electrochemical oxidation

BACKGROUND: Sulfamethoxazole (SMX, used as a model bacteriostatic antibiotic) is persistent to conventional biological treatments of wastewaters. In this work, conductive‐diamond electrochemical oxidation (CDEO) was found to be an effective technology for its removal from the effluents of conventional wastewater treatment plants. RESULTS: The use of CDEO has been evaluated for the removal of the antibiotic SMX from water and wastewaters. The results show that CDEO can reduce the concentration of this organic pollutant to values below 0.1 µg dm^?3. The variation of the SMX concentration during electrolysis shows a complex shape with a plateau zone that increases in size with the initial concentration of SMX. This complex trend is not observed in the changes of TOC, which seems to indicate that the CDEO of SMX solutions does not lead directly to the generation of carbon dioxide as a final product. A tentative reaction pathway has been proposed based on a thorough analysis of the reaction mixture, in which the main intermediate products were identified. The use of liquid chromatography time‐of‐flight mass spectrometry (LC‐TOFMS) allowed the identification of nine organic intermediates (with M_w 98, 108, 172, 173, 197, 203, 227, 269 and 287) during the electrolysis and the concentration of these compounds depends on the initial SMX concentration and on the current density applied. CONCLUSIONS: CDEO is able to reduce the concentration of the organic pollutant below 0.1 mg dm^?3. SMX removal is faster than that of TOC. This fact indicates the formation of reaction intermediates. Analytical techniques show that nine reaction intermediates are generated in the system, and that their concentration depends on the initial SMX concentration and on the current density used. Copyright © 2012 Society of Chemical Industry     

Alumina porous nanomaterials obtained by colloidal processing using d-fructose as dispersant and porosity promoter

Recently, great effort has been devoted to obtain porous materials with customized pore size distribution, high surface area and submicrometer sized microstructures or nanostructures. In this work, the viability of colloidal processing routes to obtain porous bulk ceramics using alumina nanopowders and d-fructose as a dispersant and a porosity former has been explored.The rheological behaviour of nanosuspensions was studied in order to assure their stability and to analyse the influence of different parameters (solids loading, fructose content, pH, sonication time). Mesoporous green bodies were obtained by slip casting with d-fructose in concentrations ranging from 5 to 50 wt%. The drying and burning-out conditions were determined by DTA-TG measurements and the sintering cycles were selected from the dynamic sintering curve. Sintered alumina materials with high porosity (>60%), open microstructures, submicrometer sized porosity (d_p = 140–210 nm) and grain size lower than 500 nm, were obtained for pieces sintered at temperatures of 1300 and 1400 °C. The influence of different processing parameters on the porosity and the microstructure of the sintered materials is discussed.     

Effects of grain refinement on the microstructure,mechanical properties and reliability of AlSi7Cu3Mg gravity die cast cylinder heads

The effects of grain refinement on the microstructure and mechanical properties of a secondary AlSi7-Cu3Mg gravity die cast cylinder head are reported. Metallographic and image analysis techniques have been used to quantitatively examine the macro- and microstructural changes occurring with the addition of grain-refining agent. The results indicate that the AlTi5B1 addition produces a fine and uniform grain structure throughout the casting; this effect is more pronounced in the slowly solidified regions. The initial contents of Ti and B, which are present as impurity elements in the supplied secondary alloy ingots, are not sufficient to produce effective grain refinement. Under the present casting conditions, the combined addition of AlTi5B1 and Sr does not produce any reciprocal interaction or effect on primary α-Al and eutectic solidification. Grain refinement improves the mechanical properties of the as-cast AlSi7Cu3Mg alloy and produces higher Weibull moduli, thus increasing the reliability of the casting. For automotive structural components, this could be considered an increase in safety.     

On the triple line in infiltration of liquid metals into porous preforms

Two questions of current interest are addressed in this paper: (i) Are contact angles measured by means of the sessile drop technique of any help to understand liquid metal infiltration into solid porous preforms? (ii) To what extent are contact angles derived from either the capillary law or drainage curves valid? These questions have neither simple nor unique answers, as infiltration may occur under very different scenarios, i.e., non-reactive and reactive infiltration, both spontaneous and forced. However, while the use of the simplest version of the capillary law relies upon the questionable slug-flow hypothesis, analysing drainage curves by means of the Brooks and Corey model seems justified only for particular distributions of pore sizes such as a power law. However, experimental studies indicate that threshold pressures, and therefore contact angles, derived from those two methods are not very different.     

Growth of Low-Density Vertical Quantum Dot Molecules with Control in Energy Emission

In this work, we present results on the formation of vertical molecule structures formed by two vertically aligned InAs quantum dots (QD) in which a deliberate control of energy emission is achieved. The emission energy of the first layer of QD forming the molecule can be tuned by the deposition of controlled amounts of InAs at a nanohole template formed by GaAs droplet epitaxy. The QD of the second layer are formed directly on top of the buried ones by a strain-driven process. In this way, either symmetric or asymmetric vertically coupled structures can be obtained. As a characteristic when using a droplet epitaxy patterning process, the density of quantum dot molecules finally obtained is low enough (2 × 10⁸ cm⁻²) to permit their integration as active elements in advanced photonic devices where spectroscopic studies at the single nanostructure level are required.