Polystyrene-divinylbenzene copolymer (PsDVB) was covalently functionalized with monoethanolamine (MEA), diethanolamine (DEA), and triethanolamine (TEA) by a simple method. The functionalized sorbents were characterized in terms of functionality and morphology, and used for the removal of p-toluic acid (p-TA) from aqueous solution. It was found that DEA-PsDVB has higher adsorption capacity than MEA- and TEA-PsDVB due to more accessible nitro and hydroxyl groups on its surface. Further investigation on the adsorptive properties of DEA-PsDVB indicated that the maximum uptake of p-TA occurred at the optimum pH of 5.3. The kinetics data was successfully represented by the pseudo-first-order model, and the behavior of the adsorption isotherms followed the Freundlich model well. Thermodynamic studies showed that the adsorption of p-TA onto DEA-PsDVB was an endothermic and spontaneous process along with the positive change in entropy. The regeneration of DEA-PsDVB was performed with 0.1 M NaOH solution, and results showed that 99% of the initial capacity was conserved after eight successive adsorption/regeneration cycles. 相似文献
Journal of Polymer Research - Derivatives of formyl pyrazole were synthesized by the reaction of acetophenone, 4-methyl acetophenone, 3-acetyl furan, 3-acetyl thiophen and phenyl hydrazine... 相似文献
A novel spiral micromixer with sinusoidal channel walls was designed to enhance the mixing index in the low to intermediate Reynolds number range (1 < Re < 100). To analyze the fluid flow, a set of numerical simulations were performed using the finite-difference method. The microchip was fabricated from polydimethylsiloxane, employing the soft-lithography technique. The degree of mixing was increased by 99.11 % when using the proposed micromixer, compared to 59.44 % for a simple spiral micromixer. The introduced microchannel drastically reduced the mixing length, increasing the mixing index of a 0.5-loop spiral-sinusoidal microchannel compared to that of the simple spiral microchannel with 1.5 loops. The mixing index of the 3-loop mixer was higher than that of the microchannel with 1.5 loops, and its pressure drop was increased. 相似文献
Solubility of carbon monoxide in water is very important for its biological oxidation or removal process of gaseous pollutants. Present research shows the effect of pressure on solubility of carbon monoxide in liquid phase and its removal process by a biofilter. The results are considered as laboratory research on carbon monoxide elimination. In this method a pressurized trickle-bed biofilter was used to increase pressure in the reactor. The biofilter was filled with Leca-stones and inoculated with microorganisms. When the system’s pressure is increased, the solubility of carbon monoxide will be increased, respectively, and it causes a better reaction of the microorganisms for removing of gaseous pollutants. The efficiency was improved significantly by increasing the pressure in the reactor. 相似文献
The understanding of the interactions between nanomaterials and proteins is of extreme importance in medicine. In a biological fluid, proteins can adsorb and associate with nanoparticles, which can have significant impact on the biological behavior of the proteins and the nanoparticles. We report here on the interactions of iron saturated human transferrin protein with both bare and polyvinyl alcohol coated superparamagnetic iron oxide nanoparticles (SPIONs). The exposure of human transferrin to SPIONs results in the release of iron, which changes the main function of the protein, which is the transport of iron among cells. After removal of the magnetic nanoparticles, the original protein conformation is not recovered, indicating irreversible changes in transferrin conformation: from a compact to an open structure. 相似文献
In this paper, a new kinetic model for methanol to olefin process (MTO) over SAPO-34 catalyst was developed based on data obtained from a micro catalytic reactor using appropriate reaction network. The reaction rate equation has been introduced with consideration of reaction mechanism and the parameters were optimized on the experimental data by genetic algorithm. Comparing the experimental and predicted data showed that the predicted values from the presented model are well fitted to the experimental data. Using this kinetic model, the effect of most important operating conditions such as temperature, pressure, inlet water to methanol molar ratio and methanol space–time on the product distribution, has been examined. Finally, the optimal operating conditions for maximum production of the ethylene and the propylene were introduced. 相似文献
Membranes with asymmetric wettability-Janus membranes-have recently received considerable attention for a variety of critical applications. Here, we report on a simple approach to introduce asymmetric wettability into hydrophilic porous domains. Our approach is based on the physicochemical-selective deposition of polytetrafluoroethylene (PTFE) on hydrophilic polymeric substrates. To achieve selective deposition of PTFE, we inhibit the polymerization reaction within the porous domain. We prefill the substrates with glycerol, containing a known amount of free radical inhibitor, and utilize initiated chemical vapor deposition (iCVD) for the polymerization of PTFE. We show that the glycerol/inhibitor mixture hinders the deposition of PTFE within the membrane pores. As a result, the surface of the substrates remains open and porous. The fabricated Janus membranes show stable wetting-resistant properties, evaluated through sessile drop contact angle measurements and direct contact membrane distillation (DCMD). 相似文献
Dynamically crosslinked thermoplastic elastomer nanocomposites were synthesized as modifier for the bitumen binder-based asphalts. Linear low-density polyethylene (LLDPE) and styrene-butadiene rubber (SBR), with the ratio of 80/20, bitumen, and organically modified clay (OC) were all melt mixed in the presence of the sulfur curing system. The proposed mixing was carried out in an internal mixer at 160 °C with a rotor speed of 120 rpm. To enhance the molecular interactions between the polymer phases and the clay silicate layers, maleic anhydride-grafted LLDPE (PE-g-MA) with the maleiation degree of 50% was also incorporated into the mixture. Observation of the composite samples, using the scanning electron microscopy (SEM), revealed the matrix dispersed type of morphology for all dynamically vulcanized samples. X-ray diffraction (XRD) and transmission electron microscopy (TEM) examinations evidenced the exfoliation of the clay silicate layers with good dispersion. Rheomechanical spectrometry (RMS) was performed on the prepared nanocomposites. All dynamically vulcanized nanocomposites comprising 2.5% of OC exhibited shear-thinning behavior and non-terminal characteristics with a low frequency range. These indicate the formation of three-dimensional physical networks by the clay nanolayers throughout the LLDPE matrix. The presence of the bitumen in the composition of the prepared nanocomposites improved the flowability of the samples. This is a promising feature of the prepared nanocomposites to be used as an elastic and resistant modifier in the composition of the bitumen-based asphalts.