Pulse amplitude-modulated time-based interface for off-chip interconnect

An increased number of bits pulse amplitude-modulated differential-time signalling interface for off-chip interconnect is introduced in this article by combining the differential time signalling (DTS) technique with the pulse amplitude-modulation (PAM) approach. Applying the PAM to the DTS-transmitted signal increases the total number of the transmitted bits per symbol while maintaining the transmitted signal bandwidth. 4-bit 6 Gb/s DTS serial link has been designed and simulated using 65 nm CMOS mixed signal technology. 5-bit 7.5 Gb/s and 6-bit 9 Gb/s amplitude-modulated DTS serial links have been designed, simulated and compared to the 6 Gb/s DTS serial link. The three serial links use 1.5 Gb/s as input clock signal. In the amplitude-modulated DTS-transmitted signal, the rising and falling edges of the input clock signal are modulated in time as well as the transmitted signal amplitude is modulated. A reference clock pulse is generated from the input clock signal and embedded on the transmitted signal to be used as reference timing at the receiver circuit. The design details of the designed links are presented in the article. The 9 Gb/s link uses a 60 cm 4003C Rogers substrate as a transmission channel. The transmitted signal spectrum is presented and compared for the three designed links. The total power consumption of the 9 Gb/s amplitude-modulated DTS interface is less than 25 mW.     

An improved cluster formation process in wireless sensor network to decrease energy consumption

Wireless sensor network has special features and many applications, which have attracted attention of many scientists. High energy consumption of these networks, as a drawback, can be reduced by a hierarchical routing algorithm. The proposed algorithm is based on the Low Energy Adaptive Clustering Hierarchy (LEACH) and Quadrant Cluster based LEACH (Q-LEACH) protocols. To reduce energy consumption and provide a more appropriate coverage, the network was divided into several regions and clusters were formed within each region. In selecting the cluster head (CH) in each round, the amount of residual energy and the distance from the center of each node were calculated by the base station (including the location and residual energy of each node) for all living nodes in each region. In this regard, the node with the largest value had the highest priority to be selected as the CH in each network region. The base station calculates the CH due to the lack of energy constraints and is also responsible for informing it throughout the network, which reduces the load consumption and tasks of nodes in the network. The information transfer steps in this protocol are similar to the LEACH protocol stages. To better evaluate the results, the proposed method was implemented with LEACH LEACH-SWDN, and Q-LEACH protocols using MATLAB software. The results showed better performance of the proposed method in network lifetime, first node death time, and the last node death time.

     

Advanced Bioresponsive Multitasking Hydrogels in the New Era of Biomedicine

Advanced forms of hydrogels have many inherently desirable properties and can be designed with different structures and functions. In particular, bioresponsive multifunctional hydrogels can carry out sophisticated biological functions. These include in situ single-cell approaches, capturing, analysis, and release of living cells, biomimetics of cell, tissue, and tumor-specific niches. They can allow in vivo cell manipulation and act as novel drug delivery systems, allowing diagnostic, therapeutic, vaccination, and immunotherapy methods. In the present review of multitasking hydrogels, new approaches and devices classified into point-of-care testing (POCT), microarrays, single-cell/rare cell approaches, artificial membranes, biomimetic modeling systems, nanodoctors, and microneedle patches are summarized. The potentials and application of each format are critically discussed, and some limitations are highlighted. Finally, how hydrogels can enable an “all-in-one platform” to play a key role in cancer therapy, regenerative medicine, and the treatment of inflammatory, degenerative, genetic, and metabolic diseases is being looked forward to.     

Differential Cascode Voltage Switch (DCVS) Strategies by CNTFET Technology for Standard Ternary Logic

Differential Cascode Voltage Switch (DCVS) is a well-known logic style, which constructs robust and reliable circuits. Two main strategies are studied in this paper to form static DCVS-based standard ternary fundamental logic components in digital electronics. While one of the strategies leads to fewer transistors, the other one has higher noise margin. New designs are simulated with HSPICE and 32 nm CNTFET technology at various realistic conditions such as different power supplies, load capacitors, frequencies, and temperatures. Simulations results demonstrate their robustness and efficiency even in the presence of PVT variations. In addition, new noise injection circuits for ternary logic are also presented to perform noise immunity analysis.     

On selection of forwarding nodes for long opportunistic routes

Opportunistic routing is a promising routing paradigm which increases the network throughput. It forces the sender’s neighbors, who successfully overheard the transmitted packet, to participate in the packet forwarding process as intermediate forwarding nodes. As a seminal opportunistic routing protocol, MORE combines network coding idea with opportunistic routing to eliminate the need for strict coordination among active forwarding nodes. In this paper, we show that MORE performance does not scale well with the route length, especially when the route length goes beyond two hops. Also, we found that MORE fails to establish a working opportunistic route in sparse networks. Clearly, the network throughput is directly influenced by both the quantity and quality of forwarding nodes, and their cooperation order. In this paper, we propose a new forwarder selection mechanism which considers the route length, link qualities, the distance from the source, and nodes density. It eliminates the occasional route disconnectivity happening in MORE and improves the quality of the established opportunistic routes. The simulation result indicates that our proposal always outperforms MORE when dealing with long opportunistic routes.

     

Dual-time resolution time-based transceiver for low-power serial interfaces

This paper presents the design and analysis of a CMOS power amplifier (PA) with active 2nd harmonic injection at the input. In this circuit, the main amplifier operates in class-A to provide a high linearity performance, and the auxiliary one is a class-C high efficiency amplifier, which injects the 2nd harmonic into the main amplifier. Theoretical analysis and simulations show that the proposed technique improves the PA linearity, power added efficiency (PAE), and the output power. The auxiliary amplifier, also referred as injection amplifier, injects the 2nd harmonic to the main (core) amplifier in order to compensate the gain compression phenomena at the main amplifier output node. Moreover, waveform shaping is employed to decrease the overlap of voltage and current waveforms, resulting in PAE improvement. The fully integrated PA with 2nd harmonic injection was designed and simulated in 0.18 µm CMOS technology, with a center frequency of 2.6 GHz. Post-layout simulation of PA exhibits 31.25% PAE in maximum linearity point (1 dBC point), illustrating 12.3% improvement at this power level. The 1 dBC point of PA is improved by 3.2 dB, and the PA output power is 20.2 dBm using 3.3 V supply voltage.     

Dynamic Host-Group/Multi-Destination Routing for Multicast Sessions

Multicast routing research efforts have mostly focused on supporting the host-group model in which multicast packets are addressed to a host (or multicast) group. Another multicast routing approach uses multi-destination addressing, where a multicast packet carries a list of the unique (unicast) addresses of all the group members. This form of routing can be accomplished using limited or no additional state beyond the existing unicast routing tables. It, therefore, scales well with the number of multicast sessions but does not scale well with the size of the multicast group and, in fact, requires the size of the multicast group to be below a certain threshold. In this paper, we envision a future scenario in which both host-group and multi-destination addressing routing approaches coexist within the Internet. We develop a dynamic routing context for this future scenario wherein a multicast session can adapt among different routing configurations depending on the number of multicast group members and how this number changes over time. We consider three routing options: (1) A single multi-destination addressed flow – suitable for small-group sessions, (2) multiple multi-destination addressed flows – suitable for medium-group sessions and (3) a single host-group addressed flow – suitable for large-group sessions. For multicast sessions that vary in group membership over time, different routing protocols may be best at different points in time. Our work is concerned with the development and evaluation of protocols that allow a multicast session to dynamically switch among these three routing options as the size of the session changes.     

Improving PAPR performance of filtered OFDM for 5G communications using PTS

The filtered orthogonal frequency division multiplexing (F-OFDM) system has been recommended as a waveform candidate for fifth-generation (5G) communications. The suppression of out-of-band emission (OOBE) and asynchronous transmission are the distinctive features of the filtering-based waveform frameworks. Meanwhile, the high peak-to-average power ratio (PAPR) is still a challenge for the new waveform candidates. Partial transmit sequence (PTS) is an effective technique for mitigating the trend of high PAPR in multicarrier systems. In this study, the PTS technique is employed to reduce the high PAPR value of an F-OFDM system. Then, this system is compared with the OFDM system. In addition, the other related parameters such as frequency localization, bit error rate (BER), and computational complexity are evaluated and analyzed for both systems with and without PTS. The simulation results indicate that the F-OFDM based on PTS achieves higher levels of PAPR, BER, and OOBE performances compared with OFDM. Moreover, the BER performance of F-OFDM is uninfluenced by the use of the PTS technique.     

Closed‐Loop Transmit Diversity Techniques for Small Wireless Terminals and Their Performance Assessment in a Flat Fading Channel

Closed‐loop transmit diversity is considered an important technique for improving the link budget in the third generation and future wireless communication standards. This paper proposes several transmit diversity algorithms suitable for small wireless terminals and presents performance assessment in terms of average signal‐to‐noise ratio (SNR) and outage improvement, convergence, and complexity of operations. The algorithms presented herein are verified using data from measured indoor channels with variable antenna spacing and the results explained using measured radiation patterns for a two‐element array. It is shown that for a two‐element array, the best among the proposed techniques provides SNR improvement of about 3 dB in a tightly spaced array (inter‐element spacing of 0.1 wavelength at 2 GHz) typical of small wireless devices. Additionally, these techniques are shown to perform significantly better than a single antenna device in an indoor channel considering realistic values of latency and propagation errors.     

Radiation analysis and errors associated with the monopulse operation of a satellite direction finder

This work describes the radiation performance of a novel concept for direction and location finding, using stationary satellite beacons. The received signals are processed with a monopulse four-element array. The monopulse mode is generated using the phase excitation of the radiating elements. For accurate processing the radiation phase should correspond with the bearing angle around the boresight direction. Phase deviations, however, occur in this phase pattern owing to the discrete excitation of the elements. Therefore, detailed analyses are presented for this phase pattern, its attainable gain and the depolarization effects, in order to select the kind of array elements, and their spacings, which minimize the phase pattern deviations. The dipoles and the slots, as array elements, yield better phase performance, smaller size and simpler structures than horn radiators, at the expense of worse depolarization.