Adaptation to climate change and conservation of biodiversity using green infrastructure

In recent years, we have experienced mega‐flood disasters in Japan due to climate change. In the last century, we have been building disaster prevention infrastructure (artificial levees and dams, referred to as “grey infrastructure”) to protect human lives and assets from floods, but these hard protective measures will not function against mega‐floods. Moreover, in a drastically depopulating society such as that in Japan, farmland abandonment prevails, and it will be more difficult to maintain grey infrastructure with a limited tax income. In this study, we propose the introduction of green infrastructure (GI) as an adaptation strategy for climate change. If we can use abandoned farmlands as GI, they may function to reduce disaster risks and provide habitats for various organisms that are adapted to wetland environments. First, we present a conceptual framework for disaster prevention using a hybrid of GI and conventional grey infrastructure. In this combination, the fundamental GI, composed of forests and wetlands in the catchment (GI‐1) and additional multilevel GIs such as flood control basins that function when floodwater exceeds the planning level (GI‐2) are introduced. We evaluated the flood attenuation function (GI‐1) of the Kushiro Wetland using a hydrological model and developed a methodology for selecting suitable locations of GI‐2, considering flood risk, biodiversity and the distribution of abandoned farmlands, which represent social and economic costs. The results indicated that the Kushiro Wetland acts as a large natural reservoir that attenuates the hydrological peak discharge during floods and suitable locations for introducing GI‐2 are concentrated in floodplain areas developing in the downstream reaches of large rivers. Finally, we discussed the network structure of GI‐1 as a hub and GI‐2 as a dispersal site for conservation of the Red‐crowned Crane, one of the symbolic species of Japan.     

Effect of mebendazole on free amino acid composition of cyst wall and cyst fluid of Echinococcus granulosus harbored in mice

Eighteen and 23 FAA components were detected in the cyst wall and cyst fluid of E granulosus, respectively, by using automatic amino acid analyzer. The concentrations of most of the determined FAA were higher in the cyst fluid than those in the cyst wall, especially the taurine was 5-fold higher. Mebendazole treatment resulted in an increase in the concentration of alanine, valine, lysine, and taurine in both cyst wall and cyst fluid, the most notable being the alanine in the cyst wall. The results are interpreted as a coupling of glycolysis and amino acid metabolism, suggesting an involvement of FAA metabolism in the mechanism of Meb action.     

Age-related changes in the metabolism of acetylated low-density lipoproteins by peritoneal macrophages from C57BL/6CrScl mice

Macrophages are major precursors of foam cells in atherosclerotic lesions. Acetylated low-density lipoproteins (acetyl LDL) taken up by macrophages through scavenger receptors are degraded by lysosomes and the released cholesterol is re-esterified, leading to foam cell formation. The ability of resident peritoneal macrophages from C57BL/6CrScl mice to form foam cells in relation to the donor age was assessed by the cholesterol esterification and the metabolism of acetyl LDL. The incorporation of 14C-oleate (complexed to albumin) into cellular cholesteryl esters in the presence of acetyl LDL (100 micrograms/ml) was significantly greater in macrophages from senescent mice (24-25 months) than in cells from young (3-4 months) mice (p < .001). The degradation and cellular association of acetyl LDL by macrophages from senescent mice were significantly greater than macrophages from mature mice, (p < .001 and p < .01, respectively), whereas the binding of acetyl LDL was similar in peritoneal macrophages from mature and senescent mice. These results suggest that the uptake and degradation of acetyl LDL, and the re-esterification by macrophages increase with advancing age and that the ability of macrophages to form foam cells increases with aging. The enhanced ability of senescent macrophages to form foam cells might contribute to the development and progression of atherosclerosis related to the aging process.     

Liberation of phospholipids from Z-disks of chicken skeletal muscle myofibrils by 0.1 mM calcium ions: weakening mechanism for Z-disks during post-mortem aging of meat

Weakening of the Z-disks of skeletal muscle myofibrils contributes to the tenderization of meat during post-mortem aging. To elucidate the weakening mechanism, we compared Z-disks weakened by post-mortem aging of chicken breast muscle with those of myofibrils treated with a solution containing 0.1 mM CaCl2 and 1 microM calpastatin domain I. In both cases, the Z-disks were weakened with a corresponding liberation of their constituent phospholipids (PLs). The liberation of PLs specific to 0.1 mM calcium ions was minimal at pH 6.5 and maximal at 35 degrees C together with the Z-disk weakening. Binding of calcium ions to PLs in the Z-disks was determined by 45Ca-autoradiography. Acidic PLs were strongly radioactive and neutral PLs were appreciably radioactive. It is very probable that acidic PLs would bind electrostatically to alpha-actinin under physiological conditions, and that this interaction would be broken by the binding of calcium ions at 0.1 mM to PLs, resulting in the partial liberation of PLs from Z-disks. We conclude, therefore, that the liberation of PLs by the binding of 0.1 mM calcium ions was the main cause for Z-disk weakening during the post-mortem aging of chicken.     

Dissolution Behavior of Mg from Magnesia-Chromite Refractory into Al-killed Molten Steel

Magnesia-chromite refractory materials are widely employed in steel production, and are considered a potential MgO source for the generation of MgO·Al₂O₃ spinel inclusions in steel melts. In this study, a square magnesia-chromite refractory rod was immersed into molten steel of various compositions held in an Al₂O₃ crucibles. As the immersion time was extended, Mg and Cr gradually dissolved from the magnesia-chromite refractory, and the Mg and Cr contents of the steel melts increased. However, it was found that the inclusions in the steel melts remained as almost pure Al₂O₃ because the Mg content of the steel melts was low, approximately 1 ppm. On the surface of the magnesia-chromite refractory, an MgO·Al₂O₃ spinel layer with a variable composition was formed, and the thickness of the MgO·Al₂O₃ spinel layer increased with the immersion time and the Al content of the steel melts. At the rod interface, the formed layer consisted of MgO-saturated MgO·Al₂O₃ spinel. The MgO content decreased along the thickness direction of the layer, and at the steel melts interface, the formed layer consisted of Al₂O₃-saturated MgO·Al₂O₃ spinel. Therefore, the low content of Mg in steel melts and the unchanged inclusions were because of the equilibrium between Al₂O₃-saturated MgO·Al₂O₃ layer and Al₂O₃. In addition, the effects of the Al and Cr contents of the steel melts on the dissolution of Mg from the magnesia-chromite refractory are insignificant.     

A cis-regulatory element within the 5'' flanking region of arylsulfatase gene of sea urchin, Hemicentrotus pulcherrimus

Mycobacteria generally have thick cell walls and contain large amounts of lipid, making them resistant to DNA extraction. Five methods, namely, extensive enzymic digestion method (M1), 2-min mechanical glass-bead disruption method (M2), thermal shock method (M3), modified conventional enzymic digestion method (M4), and manual disruption with modified conventional enzymic digestion method (M5), were used to compare their effectiveness and simplicity in extracting DNA from slowly growing mycobacteria (Mycobacterium leprae, M. lepraemurium and M. bovis BCG), and a rapidly growing mycobacterium (M. phlei). The highest DNA yield was obtained by M2 from M. lepraemurium which produced 2.82 micrograms DNA/mg wet weight of cells, representing a theoretical yield of 78%. M3 gave the lowest DNA yield; 0.01 microgram DNA/mg wet weight of cells of M. lepraemurium was obtained. M4, in which proteinase K was used, is more effective than M1, in which subtilisin and pronase were used. M5 yielded a higher amount of DNA, but it required more manipulations to extract DNA as compared to M4. Extraction of DNA of M. leprae from nude mice is more difficult than that of M. leprae from armadillos by all of the methods used. These results suggest that the biosynthetic capabilities of these two forms of M. leprae may vary, depending on their cultural conditions and/or strain differences. Our results have shown that both M2 and M4 are the simplest, most effective and time-saving methods which are suitable for every routine laboratory to extract DNA from slowly and rapidly growing mycobacteria.     

Catalyst Design of Pt-Modified Ni/Al2O3 Catalyst with Flat Temperature Profile in Methane Reforming with CO2 and O2

Pt(0.3)/Ni(10)/Al₂O₃, prepared by a sequential impregnation method, exhibited a more excellent performance in methane reforming with CO₂ and O₂ in terms of the catalytic activity and the temperature profile of the catalyst bed than Pt(0.3) + Ni(10)/Al₂O₃ prepared by a coimpregnation method, Ni(10)/Al₂O₃, Pt(0.3)/Al₂O₃, and Pt(10)/Al₂O₃. It is thought that this is because the surface Pt atoms on Ni catalyst can contribute to the enhancement of the catalyst reducibility.     

Characterization and Sintering Behavior of Alkoxide-Derived Aluminosilicate Powders

Submicrometer SiO₂-Al₂O₃ powders with compositions of 46.5 to 76.6 wt% Al₂O₃ were prepared by hydrolysis of mixed alkoxides. Phase change, mullite composition, and particle size of powders with heating were analyzed by DTA, XRD, IR, BET, and TEM. As-produced amorphous powders partially transformed to mullite and Al-Si spinel at around 980°C. The compositions of mullite produced at 1400° and 1550°C were richer in Al₂O₃ than the compositions of stable mullite solid solutions predicted from the phase diagram of the SiO₂-Al₂O₃ system. Particle size decreased with increasing Al₂O₃ content. The sintered densities depended upon the amount of SiO₂-rich glassy phase formed during sintering and the green density expressed as a function of particle size.     

Very high temperature annealing effect on amorphous carbon films grown on refractory oxide substrates by pulsed laser deposition

We have carried out very high temperature heat treatment at 1400–2700 °C of about 10 nm-thick amorphous carbon thin films deposited on refractory substrates MgO, Al₂O₃, and yttria-stabilized zirconia (YSZ) using pulsed laser deposition techniques. After the annealing, a few nanometer scale sp² crystallization of the films and a large corrugation with a height of more than 1 μm were observed by Raman spectroscopy analysis and optical/atomic force microscopes, respectively. The corrugation is probably caused by the formation of gases at the film/substrate interface during the heat treatment.