COSMO-RS based predictions for the desulphurization of diesel oil using ionic liquids: Effect of cation and anion combination

Ionic Liquids ILs provide an important alternative in removing aromatic sulphur compounds by Liquid-Liquid Extraction (LLE). A total of 28 anions and 6 cations resulting in 168 possible combinations were screened via COSMO-RS (COnductor Like Screening MOdel for Real Solvents). Initially benchmarking was performed to predict the infinite dilution activity coefficients of thiophene in ionic liquids. Comparison with literature values involving 8 ILs with 20 points gave the average root mean square deviation (RMS) to be 11%. Thereafter artificial simulated diesel, aromatic sulphur compound and the cation and anion combination was used to predict the capacity (C) and selectivity (S) at infinite dilution. In general the selectivities were found to decrease in the following order: thiophene (4-24) > benzothiophene (2-12)> dibenzothiophene (1-7). The different hetero atom (N,S,O) and its location in the cation structure strongly influenced the selectivity and capacity at infinite dilution for all the three aromatic sulphur compounds. It was found that the cation without the aromatic ring combined with anions having sterical shielding effect such as [SCN], [CH₃SO₃], [CH₃COO], [Cl], and [Br] proved to be the most favourable IL for desulphurization. [EMMOR][SCN] proved to be the most viable IL for the removal of all the three aromatic sulphur compounds.     

Development of a knowledge based hybrid neural network (KBHNN) for studying the effect of diafiltration during ultrafiltration of whey

The membrane surface dynamics is very difficult to predict and can be roughly estimated by the available models but a true depiction is always difficult since the magnitude and direction of driving forces change as a function of time. The present study is an effort to address the issue, so that the combinatorial approach of deterministic and stochastic modelling might present a better understanding of membrane dynamics. The effect of diafiltration has also been incorporated to investigate the effects it has on the membrane. A stochastic model developed by a knowledge based hybrid neural network (KBHNN) was trained using the Levenberg–Marqurt algorithm where the film layer model was used as the deterministic layer, called the first principle model (FPM). Present work employs two different types of KBHNN architecture with an effort to understand the suitability and applicability of the hybrid network in case of predictions for an ultrafiltration (UF) process. In one sort of architecture neural part was in series with the FPM and in the other one it was in parallel with the FPM. The high correlation coefficient (R²) value portrays the correctness and preciseness of the underlining assumptions and establishes the validity of the developed network.     

Processable high Tg high strength fluorinated new poly(arylene ether)s containing imido aryl group

A series of poly(arylene ether)s ( 7a–7f ) were successfully synthesized by aromatic nucleophilic substitution reactions of imidoaryl biphenol (5), 4,9‐bis‐(4‐hydroxy‐phenyl)‐2‐phenyl‐benzo[f]isoindole‐1,3‐dione with six different trifluoromethyl substituted bisfluoro monomers ( 6a–6f ). The weight‐average molar masses of the polymers were up to 280 kD as measured by GPC. These poly(arylene ether)s exhibited glass transition temperatures up to 361°C in DSC. These polymers showed very high thermal stability up to 558°C for 10% weight loss under synthetic air in TGA. Except 7d–7f, remaining polymers 7a–7c were soluble in a wide range of organic solvents. Transparent thin films of these polymers cast from DCM or NMP exhibited tensile strengths up to 75 MPa and elongation at break up to 41% depending on their exact repeating unit structures. These poly(arylene ether)s showed cut‐off wavelength in between 400 and 450 nm except 7d and water absorption were in the range of 0.4 to 0.6%. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Studies of mechanical and moisture regain properties of methyl methacrylate grafted silk fibers

The mechanical properties such as the tenacity, breaking extension, initial modulus, elastic and work recovery, and stress relaxation behavior of methyl methacrylate (MMA) grafted silk fibers prepared under different conditions were measured and explained in terms of the relative dominance of the stress concentration, reduction in the interchain cohesion, and fiber matrix stiffening at different grafting percentages. The moisture regain characteristics of fibers grafted in the presence of different solvents were also studied and compared. The grafting of MMA on silk was found to improve the recovery properties significantly without affecting the stress relaxation behavior. The moisture regain studies indicate that moisture regain is reduced with increasing length of the grafted poly(MMA) chains. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 969–974, 2002; DOI 10.1002/app.10202     

Mechanical and dynamic mechanical properties of jute fibers–Novolac–epoxy composite laminates

A study was done of jute composite using a polymer matrix of epoxidized Novolac resin (ENR), diglycidyl ether of bisphenol A (DGEBA)–based epoxy, and their blends with different weight percentages of the resins. It was found that on blending ENR with DGEBA, the storage modulii at room temperature are enhanced by about 100% or more in the case of 30 and 40% ENR‐containing matrices, whereas the enhancement in the case of 20 and 12% ENR‐containing matrices is only 50% that of the pure matrix. It was also observed that the tan δ peak heights of the composites containing 30 and 40% ENR are closer to that of 20% ENR‐containing composite. The probable explanation drawn on the basis of experimental findings of DMA and mechanical analysis is that by blending ENR with DGEBA epoxy it is possible to manufacture jute composites with increased stiffness without sacrificing their ductility. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2800–2807, 2002     

Quick response-encoded chip engraved onto multifunctional aspirin loaded enteric films by fused filament fabrication-3D printing

Digital fabrication technology revolutionizing the pharmaceutical industry, offering patient-centric personalized medicine with tailored pharmacotherapy. In this study, we demonstrated fused filament fabrication coupled with hot melt extrusion for the fabrication of aspirin (ASP) loaded enteric film engraved onto QR-encoded polylactic acid films for enteric intestinal specific ASP delivery. Further, QR-encoded films (QRFs) were formulated and its physicochemical properties were assessed systematically. All the QRFs were scannable and readable. Interestingly, due to the advantage of the plasticizing effect of ASP, the formulation was optimized with drug and polymer ratio excluding the usage of any filler and plasticizers. The compatibility study was assessed by attenuated total reflectance and Raman spectroscopy. The physicochemical evaluation was further performed by scanning electron microscopy, x-ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. Gastric resistance was assessed via performing dissolution study at gastric pH for 4 h, with a lag phase followed by radical increase in an alkaline for next 8 h. Korsmeyer–Peppas model was found to be the best-fit mathematical kinetic model (R² > 0.9475 and n = 0.514). This type of QRFs can help the tailoring doses and patients can know the details of the drug that has to be taken.     

Study on coke size degradation from coke plant wharf to blast furnaces stock house

The gas permeability, which is one of the most important requirements served by coke, is dependent largely on the size distribution of the coke at the various zones in the blast furnace. This papers deals with breakage of coke when it travels from wharf to blast furnace. In this study, six different coal blend samples in the range of 23.6–25.0% volatile matter and 11.7–14.8% ash were studied in stamp charged coke making process (wet bulk density 1.15 t/m³). The coke samples were collected from battery no. 8 wharf, CK06 (conveyer belt) and auto sampler. All experiments were conducted on shatter machine and an attempt has been made to find out reasons for breakage of coke. Results indicate that the coke size degradation is function of transporting system and dropping height of coke from wharf to blast furnace. It was also found that in stamp charging condition, it is possible to improve yield of blast furnace grade coke even at higher composition balance index of coal blend (2.94–3.70).     

Synthesis,characterization, and properties of new siloxane grafted copolyimides

Three new siloxane containing grafted copolyimides have been prepared by one‐pot solution imidization technique. The polymers are made by the reaction of 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthalic anhydride) (BPADA) with commercially available diamine 4,4′‐oxydianiline (ODA) with variation of silicon containing diamine, namely 3,5‐diaminobenzoate terminated polydimethylsiloxane (DBPDMS), as a comonomer to 10, 20, and 30 wt %. The films of the polymers were prepared by casting the polymer solution in dichloromethane. The polymers have been well‐characterized by GPC, IR, and NMR techniques. Thermal stabilities and decomposition behavior of the copolyimides were studied by DSC and TGA. The water contact angle values of the films indicate hydrophobic nature of the polymers. Thermal, flame retardant, mechanical, and surface properties of these polymers have been compared with the homopolyimide and with polyimides where polysiloxane is incorporated in the main chain. DSC revealed melting of the grafted siloxane chain at sub‐ambient temperature and a glass transition corresponding to the main polymer chain above 200°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Profile of Triacylglycerols,Phenols, and Vitamin E of Manjari Medika Grape Seed Oil and Cake: Introducing a Novel Indian Variety

The aim of the study is to investigate the biochemical composition of grapeseed oil and cake from an unexplored Indian grape‐juice cultivar, Manjari Medika (MM). The composition of oil and residual seed cake is evaluated using various chromatographic and spectroscopic techniques. The findings demonstrate that the vitamin E content of MM‐seed oil (1.15–1.35 g kg^?1) is distinctively higher than the Codex standard, suggesting its superior quality as an edible oil. The predominant triacylglycerols include trilinolein (LLL, 43%), dilinoleoyl‐stearylglycerol (LSL, 19%), and dilinoleoyl‐palmitoylglycerol (LLP, 11%), which are earlier recognized as natural antioxidants. The seed‐cake is rich in polyphenols including acylated anthocyanins (e.g., pelargonidin‐3‐O‐coumaroyl glucoside) and certain other flavonoids (e.g., catechin). The profile of phytonutrients in MM seed‐oil and cake is significantly superior to its seeded female parent and two other widely cultivated wine‐grape varieties. In brief, the studied by‐products of this new grape‐juice cultivar can be an important source of high‐value ingredients for use in food supplements, nutraceuticals, and functional foods. Practical applications: This study reports the phytochemical profile of the seed‐oil and seed cake derived from a newly developed grape variety, Manjari Medika. High contents of selective antioxidants: lipids, vitamin E, and phenols in the seed‐oil and cake with health benefits suggest their potential for use in nutraceutical and functional foods. These byproducts can be utilised as ingredients of functional foods and nutraceuticals (e.g., grape seed oil capsule) and also as raw materials in food supply chains (e.g., for production of grape cookies or cake). MM can also be utilized as a colorant in the food industry.     

Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.