塑料包装应用及技术进展

塑料在包装领域有着广泛的应用，其中聚酯（PET）性能优良，应用领域不断扩大。介绍了塑料包装不断通现的新技术，以及塑料包装环保问题的几点思路。     

Continuous production of structured phospholipids in a packed bed reactor with lipase from <Emphasis Type="Italic">Thermomyces lanuginosa</Emphasis>

The possibilities of producing structured phospholipids between soybean phospholipids and caprylic acid by lipase-catalyzed acidolysis were examined in continuous packedbed enzyme reactors. Acidolysis reactions were performed in both a solvent system and a solvent-free system with the commercially immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) as catalyst. In the packed bed reactors, different parameters for the lipase-catalyzed acidolysis were elucidated, such as solvent ratio (solvent system), temperature, substrate ratio, residence time, water content, and operation stability. The water content was observed to be very crucial for the acidolysis reaction in packed bed reactors. If no water was added to the substrate during reactions under the solvent-free system, very low incorporation corporation of caprylic acid was observed. In both solvent and solvent-free systems, acyl incorporation was favored by a high substrate ratio between acyl donor and phospholipids, a longer residence time, and a higher reaction temperature. Under certain conditions, the incorporation of around 30% caprylic acid can be obtained in continuous operation with hexane as the solvent. Presented at the 95th American Oil Chemists' Society Annual Meeting and Expo in Cincinnati, Ohio, May 10, 2004.     

快闪存储器大有可为

快闪存储器经历过高速发展时间,由于供过于求,目前行情看跌,但发展前景无疑是远大的。重点介绍了英特尔、AMD和三星的最新产品和重大市场举措。最后简要介绍了当前快闪存储器的技术发展趋势。     

无润滑空气压缩机冷却水系统的清洗

介绍了无润滑空气压缩机冷却水系统结垢的危害性，阐述了清洗的原理，提出了清洗时应注意的工艺参数，操作时的注意事项和由此带来的经济效益。     

金属闪光外墙乳胶漆的研制及性能研究

以丙烯酸酯及有机硅单体为原料合成了核-壳型硅丙乳液,用自制分散剂将闪光铝粉分散成水性闪光铝粉浆,并成功分散于硅丙乳液中,加入进口助剂,配制成水性金属闪光外墙乳胶漆.讨论了基料的玻璃化温度、单体的加入方式、引发剂、乳化剂、反应温度、聚合工艺和pH等对乳胶漆性能的影响.     

Lymphatic transport in rats of interesterified oils containing conjugated linoleic acids

In this study we examined the lymphatic transport in rats of FA after administration of interesterified oils containing CLA, with emphasis on the location of CLA and octanoic acid in the TAG. The oils were produced by enzymatic interesterification. Eight oils with different structures or FA profiles were examined in this study: MCM, CMC, OCO, and COC, where M was expected to be octanoic acid and O oleic acid. In group 1, C was CLA as a mixture of the two CLA isomers c9, t11 or t10, c12, and in group 2, C was mainly the isomer t10, c12. Rats were subjected to cannulation of the mesenteric lymph duct, and the following day they were intragastrically administered one of the oils and lymph samples were collected for 24 h. The lymphatic transport of total FA from 0 to 8 h in group 1 was significantly (P < 0.05) higher for the OCO-1 and the COC-1 oils than for the CMC-1 oil. Similarly, in group 2 the transport was higher for the OCO-2 oil than for the CMC-2 oil. The recovery of both of the CLA isomers examined was similar (50-70%) and independent of the isomer, oil structure, and FA profile, whereas more octanoic acid was recovered from the CMC oils than from the MCM oils. The results indicated that the FA profiles and the position of octanoic acid had only a minor influence on the absorption of CLA.     

Leave-one-out cross-validation-based model selection for multi-input multi-output support vector machine

As an effective approach for multi-input multi-output regression estimation problems, a multi-dimensional support vector regression (SVR), named M-SVR, is generally capable of obtaining better predictions than applying a conventional support vector machine (SVM) independently for each output dimension. However, although there are many generalization error bounds for conventional SVMs, all of them cannot be directly applied to M-SVR. In this paper, a new leave-one-out (LOO) error estimate for M-SVR is derived firstly through a virtual LOO cross-validation procedure. This LOO error estimate can be straightway calculated once a training process ended with less computational complexity than traditional LOO method. Based on this LOO estimate, a new model selection methods for M-SVR based on multi-objective optimization strategy is further proposed in this paper. Experiments on toy noisy function regression and practical engineering data set, that is, dynamic load identification on cylinder vibration system, are both conducted, demonstrating comparable results of the proposed method in terms of generalization performance and computational cost.     

Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology

Poly(trimethylene terephthalate) (PTT) nano composites were synthesized by in situ polymerization at high temperature with two thermally stable organoclays: 1,2‐dimethylhexadecylimidazolium‐montmorillonite (IMD‐MMT) and dodecyltriphenyl phosphonium‐MMT (C₁₂PPh‐MMT). PTT hybrid fibers with various organoclay contents were melt‐spun at various draw ratios (DRs) to produce monofilaments. The thermomechanical properties and morphologies of the PTT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide‐angle X‐ray diffraction, electron microscopy, and mechanical tensile properties analysis. The nanostructure of the hybrid fibers was observed by both scanning and transmission electron microscopy, which showed that the clay layers were well dispersed into the matrix polymer, although some clusters or agglomerated particles were also detected. Unlike the hybrids containing IMD‐MMT, the clay layers of the C₁₂PPh‐MMT hybrid fiber were more dispersed into the matrix polymer. The thermal stability and tensile properties of the hybrid fibers increased with increasing clay content for DR = 1. However, as DR increased from 1 to 9 the ultimate strength and initial modulus of the hybrid fibers with IMD‐MMT increased slightly whereas those of C₁₂PPh‐MMT hybrid fibers decreased slightly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4535–4545, 2006     

烟气脱硫的发展、技术与产业化探讨

回顾了我国烟气脱硫的发展历程 ,总结了我国烟气脱硫产业化方面取得的成绩和存在的问题 ,介绍了国际上烟气脱硫发展的基本情况